Currently, there are 0 users and 0 guests visiting this topic.
Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #205560
    Drybonz
    Participant
    @drybonz
    Member

    Hi guys… I haven’t posted in a while, but could use some help setting up my pinball controller again.  I put the nudge hardware inside (pinscape?  can’t remember what they are called.  I keep getting older)… and it is showing up as a controller in Windows devices and taking priority over my other controllers so that nothing is working right.  I’m wondering if there are drivers or software needed for those things?  If anyone can point me in the right direction, I appreciate it.

    #205978
    Diguelo
    Participant
    @diguelo

    Nudge hardware, please define exactly what it is you are using to provide the info to the PC. Is it an accelerometer based board or some other form of movement detection, (ball on a string).

    As for reorganising your controllers into priority use the Game Controller interface  to assign priority. If that fails let this thread know.

    Multi controllers and interfaces are a pain. I have Legacy (Basic) devices in conjunction with Modern day HOTAS and Joypad. Ive made a few USB 32 step controllers. Provide the information I will provide what help I can

    Silver ball go that way, as eyes went this way, GAME OVER !!

    #206052
    naeromagus
    Participant
    @naeromagus
    Member

    Did you program the kl25z. Anyway here is the site with all of the resources.

    http://mjrnet.org/pinscape/

    #206054
    32assassin
    Participant
    @32assassin
    Member

    so what are your other controllers?

    and why do you have multiple controllers when Pinscape does everything.

    see a table you like help me find the resources so that I can finish it
    https://www.dropbox.com/sh/7qtake9whi5ium2/AAB4K4W78oMVlqSxTzKtGHTHa?dl=0

    #206115
    Drybonz
    Participant
    @drybonz
    Member

    Yes… kl25z… that’s the one I have… thank you.

    32A, it’s in an arcade controller with 2 Ultrastik 360’s for MAME… so Windows sees all of those and wants to prioritize the pinscape.  The kl25z was originally programmed, but I’ve since reinstalled Windows and wasn’t sure if I need to reinstall drivers or some software to sort it out.

    Thanks for the replies, guys.    :good:

Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.

©2020 VPinBall.com

Log in with your credentials

or    

Forgot your details?

Create Account

The Vpinball app

FREE
VIEW