This topic contains 17 replies, has 6 voices, and was last updated by  Thalamus 10 months, 1 week ago.

Currently, there are 0 users and 1 guest visiting this topic.
Viewing 18 posts - 1 through 18 (of 18 total)
  • Author
    Posts
  • #42308
     senseless 
    Participant
    Member

    Plain and simple backglass for 3 screen setup. No animation, grill or DMD.

    4 users thanked author for this post.
    #42347
     Johngreve 
    Participant
    Member

    Hello,
    The instructions to bring the backglass up seem straightforward enough and I thought I did as instructed but have been unable to get it to display. I’ve matched the backglass and table files name like always and added the changes to the script as instructed. I suspect that I dont have those changes made correctly. Could I ask someone to give me a bit more detail where to install those changes in the script?
    Maybe there is something else that I’m missing?
    Thank you

    #42348
     senseless 
    Participant
    Member

    Just insert at line 10 (new line):

    ExecuteGlobal GetTextFile(“controller.vbs”)

    And insert at line 84 (new line):

    LoadEM

    Should work…

    Make sure controller.vbs is in your ..\Visual Pinball\Scripts directory.

    If you still have trouble PM me and I will send you the modified version.

    2 users thanked author for this post.
    #42363
     Johngreve 
    Participant
    Member

    Thanks senseless!
    Got it now…..must of added some of those required changes to the wrong spot in the script.
    Really helped to get the additional detail from you….I’m sure it will help others as well.
    Thanks again for taking the time to spell it out for me.

    #103574
     incomjohn 
    Participant

    thank you works a treat now .script placed at blank lines at 11 and 84

    #106666
     rgarriott 
    Participant
    Member

    Hello all, this is my first download and am having trouble with the script. I tried the above methods but im not doin something right. Could someone post a screenshot of ur script showing what goes where and what your file names look like. I sure appreciate it. Thanks

    #106678
     Thalamus 
    Moderator
    ContributorMemberModerator

    Open table – open script – delete everything. Replace them with a copy / paste from this link :

    https://raw.githubusercontent.com/sverrewl/vpxtable_scripts/master/JP-Ghostbusters%20Slimer%20v1.2.1.vbs

    1 user thanked author for this post.
    #106680
     rgarriott 
    Participant
    Member

    Appreciate the quick response. Ill try rhis as soon as i get home from work.

    #106707
     rgarriott 
    Participant
    Member

    Ok. I tried the new script lastnight and im getting some errors.  CBD07530-A9DC-4992-AFCE-DEF47CC7717536A5E3DF-12EF-452C-AFD8-5E8F6A846AFAB96E96FB-DA6C-4091-BE95-0BFA8C2B10B6CAEFCA60-02EF-4744-9283-025D94F36693

    #106709
     Thalamus 
    Moderator
    ContributorMemberModerator

    What version of VP are you running ? You need 10.4 or newer since that script has the “new” ( now quite old ) 9th parameter to playsound enabled. If you are on a newer version than 10.4, it sound like you have either a old controller.vbs and/or a old version of core.vbs inside the tables folder.

    I should add though. It is important that you apply the script to the table with the same version. 1.2.1 in this case. Lets say you have 1.2.0 and some object didn’t exist but referred in the code, it would could crash. These errors though, does not indicate that.

    1 user thanked author for this post.
    #106711
     rgarriott 
    Participant
    Member

    I think im running 10.2 or 10.3. I’ll update and retry. Thanks again

    #106713
     Thalamus 
    Moderator
    ContributorMemberModerator

    Please note that when you update to 10.4. VP has surround sound capabilities. So, if you have a sound card with surround capabilities ( most has nowadays ) I advice people to try it out. I have a old desktop computer with some old Logitech speakers. I sub and back and front pairs. You should be able to hear approximately where the ball are and what it hits.

    #106810
     rgarriott 
    Participant
    Member

    D6BB48FE-B489-4625-987E-8CFC17CB360D

    Ok I updated vpx to the lastest version. This is what i get when i play the table. Full table on monitor 1 and the bacglass just shows up in the toolbar and i cant get it to expand to the whole monitor 2. Any suggestions?

    #106811
     rgarriott 
    Participant
    Member

    This is also happening to a kiss table i downloaded.

    #106833
     Thalamus 
    Moderator
    ContributorMemberModerator

    It is probably related to screenres.txt no being correct.

    #106864
     Wildman 
    Participant
    Member

    It is probably related to screenres.txt no being correct.

    What he said ^^^^^^ :good:

    #106869
     rgarriott 
    Participant
    Member

    It is probably related to screenres.txt no being correct.

    So what should i be looking for on this?  Would this b a backglass setting?

    #106870
     Thalamus 
    Moderator
    ContributorMemberModerator

    Yes. The screenres.txt file defines both playfield and backglass positions.

    Here is more or less a random hit searching for screenres.txt @ vpf. It has been explained over and over again.

    https://www.vpforums.org/index.php?showtopic=33272&p=346276 – Just search vpf for screenres.txt if that link is confusing.

    It should be in the same folder as your tables. if you have several, copy it to the other folders or create shotcuts ( advanced alternative )

Viewing 18 posts - 1 through 18 (of 18 total)

You must be logged in to reply to this topic.

©2019 VPinBall.com

WP2Social Auto Publish Powered By : XYZScripts.com
Vpinball.com

Log in with your credentials

or    

Forgot your details?

Create Account