- This topic has 1 reply, 2 voices, and was last updated 5 years, 11 months ago by .
Viewing 2 posts - 1 through 2 (of 2 total)
Viewing 2 posts - 1 through 2 (of 2 total)
RELUCTANTLY enabled site for everyone to view for historical reference only. Downloads area not publicly available.
Development of this for Visual Pinball, is underway attached is the backglass frame
You need to login in order to like this post: click here
Use my Tron “2 on 1” or “3 on 1” PuP-Pack as a reference on how to setup the Backglass “screen” to use CustomPos.
“reference screen,x%,y%,w%,h%”
reference screen = any pup screen’s default settings to use as a “reference” starting point for position and size. 0, 2, etc… 99 however is special in that it resizes just the player window, but not the PuP screen. Was needed for Tron with the Overlay.
x% = x position for the current pup display (out of 100%)
y% = y position for the current pup display (out of 100%)
w% = width for the current pup display (out of 100%)
h% = height for the current pup display (out of 100%)
For Tron “2 on 1” or “3 on 1” is setup so that the still image overlay will work with your videos being “resized” by PuP to fit under your Overlay frame, while keeping the PuP Backglass screen size unchanged.
Also, you can use D0=1 as the trigger for your Overlay. D0 is a “special” trigger that is only used for the “startup” of a PuP-Pack.
Your Overlay still image must be PNG, and it must be in the PuPOverlays folder in the PuP-Pack.
You need to login in order to like this post: click here
Forums are currently locked.
©2024 VPinBall.com