Lost all DOF devices except LEDs

[gwarrior]

Alright, I’m at a loss so I’m putting this out there in case anyone can help.

I’m running 5 RGB LEDs, a strobe, and 4 contactors directly off my LedWiz, plus a beacon, fan and knocker off the LedWiz through a SainSmart that has 24V power running to it.  In addition, I’m running 6 more contactors off a zebs board.  Finally, I’m running a shaker motor, plus 2 contactors (for my flippers) off my KL25Z.

Everything was working just fine.

Suddenly, in the middle of a game, everything stopped working except the 5 RGB LEDs.

I have a feeling that there must be a power issue…the 5 RGB LEDs require the least amount of power to flash, and are the only things that still work…all the higher voltage devices stopped working.  It’s not a problem with my LedWiz or zebs, because devices on both boards stopped working at the same time.  Also, when I run SimpleLEDtest and activate the devices that run through the SainSmart, the SainSmart lights up accordingly, and lets me know that the signal is going from the LedWiz to the SainSmart…but the toys attached just aren’t going off.

Any help would be much appreciated!!!

You need to login in order to like this post: click here

[gwarrior]

Solved.  Blown fuse on the ATX Benchtop Power Adapter Board.  Duh!

You need to login in order to like this post: click here

[flstclasic]

I was going to suggest that but I thought “no, couldn’t be that easy”. Ha

You need to login in order to like this post: click here

[Author]

Posts