- This topic has 32 replies, 3 voices, and was last updated 3 years, 9 months ago by llyrric.
-
AuthorPosts
-
August 15, 2018 at 2:12 pm #95562
Hi,
I have installed the new VPX metallica premium monsters…with the mL_170h rom..which is listed in direct output…however I only get the odd strobe light and the odd yellow flash from a couple of my RGB flashers. any ideas?….watching several videos and playing the table the has loads of lighting going on.
I have a zebs bar with 5 RGB flashers and 2 strobes….works fine with everything else…just this table?
Thanks,
Sean
You need to login in order to like this post: click here
August 15, 2018 at 3:38 pm #95563Go to your account for the DOF config tool
http://configtool.vpuniverse.com/login.php
make sure you have the 170 rom selected not the older 164 rom for this table, then re-download the config files and drop where required
You need to login in order to like this post: click here
August 15, 2018 at 4:06 pm #95564Just done this and mtl_170 is selected..Ive updated it anyway and still no joy….just getting strobes on ramps only, yellow right flasher (when ball launched) and centre yellow flasher only…confused
You need to login in order to like this post: click here
August 15, 2018 at 4:56 pm #95565mtl_170h and mtl_170 are two different tables. 170h is LE and 170 is standard.
You need to login in order to like this post: click here
August 16, 2018 at 12:01 am #95595Oops I missed that part of my explanation, or took that part for granted
You need to login in order to like this post: click here
August 16, 2018 at 12:36 am #95597Not sure you did. I just noticed he changed table from one post to the other. Obviously some confusion going on here.
You need to login in order to like this post: click here
August 16, 2018 at 3:28 am #95604still no joy… ;(
I have the mtl170LE.bin rom, zipped as mL_170h…and the game loads fine. In my direct output config the 170h rom is chosen for the Metallica premium version…and still no joy…the odd yellow light, odd strobe and my motor for the cross.
:(
You need to login in order to like this post: click here
August 16, 2018 at 4:55 am #95605Ok. You seem to do it correctly at least. I did experience about a month back that my config update wasn’t correct. I then just re-downloaded and it was OK. I expect you’ve tried that several times. You don’t take backups of you machine ? You could try to compare the table mapping file from the backup an now and see if there are any major differences on the old vs the new. Obviously you will have to compare 164 vs 170 now.
You need to login in order to like this post: click here
August 16, 2018 at 5:00 am #95606thanks I’ll have a look
You need to login in order to like this post: click here
August 16, 2018 at 5:23 am #95607August 16, 2018 at 8:46 am #95614What ? Really ? Ok. That sounds really odd. Do you still have both 1.4 and 1.5 around ? Do they act the same ?
You need to login in order to like this post: click here
1 user thanked author for this post.
August 16, 2018 at 2:00 pm #95648yes tried all versions that accept the mtL_170h rom..still no joy
You need to login in order to like this post: click here
August 16, 2018 at 2:31 pm #95659I would love to help you. But, I can’t come to think of anything to help you on the way I’m afraid. No antivirus or other crap installed ?
You need to login in order to like this post: click here
August 16, 2018 at 2:52 pm #95672nope nothing….
its really strange…every other table works amazing…
Ive just redone everything once more and have these elements only – can’t be correct considering the amount of lighting on the table – is it something to do with the script?
Anyway this is what I am getting:
right outer ramp – yellow outside RGB flasher
both metal ramps – strobe
slingshots – outer RGB flashers red
left top lane above bumpers – yellow middle RGB flasher
full feedback from contactors/knocker/motors etc
Thanks for your help,
Sean
You need to login in order to like this post: click here
August 16, 2018 at 3:15 pm #95679I must admit I haven’t had time to play the updated 1.5 much yet. I’m planning on it though .But, I’m sure that the few rounds I gave it felt great. So, I expect that I would notice anything odd. I will give this table a new whooping this weekend since my wife is going away and i’ll have friends over ;)
That is no help to you. Unfortunately. I just don’t understand how I can be of as any further assistance to you right now. Sorry.
You need to login in order to like this post: click here
August 16, 2018 at 5:50 pm #95696I run the newest of the new…. and all works fine
VPX 10.5 final
VMP 3.1 updated with SAMBuild_r4614 makes it 3.2
B2S 1.30.3
Freezy’s 1.7.1You need to login in order to like this post: click here
August 17, 2018 at 7:27 am #95752Thanks Ill double check all mine and try this
You need to login in order to like this post: click here
August 17, 2018 at 11:07 am #95769Have u tried to delete the nvram?
You need to login in order to like this post: click here
August 23, 2018 at 1:59 pm #96210August 24, 2018 at 8:04 am #96296 -
AuthorPosts
Forums are currently locked.