Mini cabinet shell complete

[Mikethinks]

Managed to get the base and backbox cut and assembled this weekend.  Next step will be sealing and final sanding prior to the paining of the outside base color.  After that will be the mounting supports for the 24″ playfield and 19″ backglass.  Going to make a cross beam for the vesa bolts for both.   By next weekend I hope to drill out the buttons and figure out something for a lockdown bar so I can finish painting and get the side rails and plexi put on.

Attachments:

1. 

   pinball-threequarters-1.jpg
   

2. 

   Pinballshellsm.jpg
   

You need to login in order to like this post: click here

[jino0372]

Looks good!  It’s about the same size of my current cab.

You need to login in order to like this post: click here

[Mikethinks]

So lots of rain this weekend, not such a good time for painting :(

 

I did get the button layout drilled, added an access door to the back, drilled out my two VESA crossmember holes, got the initial lockdown bar done, install the main monitor shelf holder pins and get the side rails cut, install the transducers and seal the MDF.  Also received the stencils I want to try for my artwork.  Not sure if its going to look as good as I hope, but paint is easy to fix :)

 

You need to login in order to like this post: click here

[Author]

Posts