- This topic has 11 replies, 5 voices, and was last updated 5 years ago by
.
-
Posts
-
https://vpinball.com/VPBdownloads/mr-and-mrs-pac-man-bally-1982/
the GI lights do not turn off when you go into the Maze
according to the manual the GI lights are driven by the Aux. Driver (GI Flasher) AS-2518-68
http://www.marcospecialties.com/pinball-parts/AS-2518-68
from the link the board is compatible with other tables, tables I scripted and the GI lights are controlled by a Lamp ID. I did not find that ID.
Big thank you to Francisco666 for his artwork.
see a table you like help me find the resources so that I can finish it
https://www.dropbox.com/sh/7qtake9whi5ium2/AAB4K4W78oMVlqSxTzKtGHTHa?dl=0see a table you like help me find the resources so that I can finish it
https://www.dropbox.com/sh/7qtake9whi5ium2/AAB4K4W78oMVlqSxTzKtGHTHa?dl=0You need to login in order to like this post: click here
Total of 34 users thanked author for this post. Here are last 20 listed.
Great work 32. Thanks.
You need to login in order to like this post: click here
Is there any way to set this table to freeplay? I’ve tried the m_mpaca rom without luck.
You need to login in order to like this post: click here
Thanks for this table 32ass. Didn´t noticed before that this table was released yet
Plays / looks very good and i love this flipper / cabinet design.
If u want to “freeplay” it´s not possible i think. Those old ballys were set to “get a coin / play” at 1000 points in flipper museums to “free play” in another kind.
VPin: Williams Time Warp Cabinet (1979), 4K playfield: 40" Iiyama X4071UHSU, backglass: 32" LG. Pin2DMD, Pincontrol 1, LEDWiz, nudging, tilt, plunger, 10 big siemens contactors, Shaker, Strobo, Gear, Beacon, RGB Flasher 5x, Knocker, PC: Intel i5 2500k@4.5Ghz, 8 GB Ram, Zotac GTX 1070 Mini, Win10
VPin: Williams Time Warp Cabinet (1979), 4K playfield: 40" Iiyama X4071UHSU, backglass: 32" LG. Pin2DMD, Pincontrol 1, LEDWiz, nudging, tilt, plunger, 10 big siemens contactors, Shaker, Strobo, Gear, Beacon, RGB Flasher 5x, Knocker, PC: Intel i5 2500k@4.5Ghz, 8 GB Ram, Zotac GTX 1070 Mini, Win10
You need to login in order to like this post: click here
Actually, the Aux. Driver is used to bypass the hard limit on the number of solenoids the Solenoid Driver Board had by adding in a light board driven switch that diverts the current to an alternate solenoid when triggered by the light board,
You need to login in order to like this post: click here
@32assassin: noticed that there´s a typo in script lines 219 ff so that standup targets behind drop targets didn´t register
So lines …
‘Stand Up Targets
Sub S34_Hit:vpmTimer.PulseSw 34:End Sub
Sub S35_Hit:vpmTimer.PulseSw 35:End Sub
Sub S36_Hit:vpmTimer.PulseSw 36:End SubSub S38_Hit:vpmTimer.PulseSw 38:End Sub
Sub S39_Hit:vpmTimer.PulseSw 39:End Sub
Sub S40_Hit:vpmTimer.PulseSw 40:End Submust be changed to
‘Stand Up Targets
Sub sw34_Hit:vpmTimer.PulseSw 34:End Sub
Sub sw35_Hit:vpmTimer.PulseSw 35:End Sub
Sub sw36_Hit:vpmTimer.PulseSw 36:End SubSub sw38_Hit:vpmTimer.PulseSw 38:End Sub
Sub sw39_Hit:vpmTimer.PulseSw 39:End Sub
Sub sw40_Hit:vpmTimer.PulseSw 40:End SubOnce more thanky you for this nice table …
VPin: Williams Time Warp Cabinet (1979), 4K playfield: 40" Iiyama X4071UHSU, backglass: 32" LG. Pin2DMD, Pincontrol 1, LEDWiz, nudging, tilt, plunger, 10 big siemens contactors, Shaker, Strobo, Gear, Beacon, RGB Flasher 5x, Knocker, PC: Intel i5 2500k@4.5Ghz, 8 GB Ram, Zotac GTX 1070 Mini, Win10
VPin: Williams Time Warp Cabinet (1979), 4K playfield: 40" Iiyama X4071UHSU, backglass: 32" LG. Pin2DMD, Pincontrol 1, LEDWiz, nudging, tilt, plunger, 10 big siemens contactors, Shaker, Strobo, Gear, Beacon, RGB Flasher 5x, Knocker, PC: Intel i5 2500k@4.5Ghz, 8 GB Ram, Zotac GTX 1070 Mini, Win10
You need to login in order to like this post: click here
thanks for your work and time fpr this community !
You need to login in order to like this post: click here
after test and if i understand wll, the labyrinth isn’t working ? there is no yellow light and the light didn’t stay lighten when you fill the labyrinth…
You need to login in order to like this post: click here
after test and if i understand wll, the labyrinth isn’t working ? there is no yellow light and the light didn’t stay lighten when you fill the labyrinth…
Working here fine. Do you know the rules of this table and how getting into the PacMaze really?
VPin: Williams Time Warp Cabinet (1979), 4K playfield: 40" Iiyama X4071UHSU, backglass: 32" LG. Pin2DMD, Pincontrol 1, LEDWiz, nudging, tilt, plunger, 10 big siemens contactors, Shaker, Strobo, Gear, Beacon, RGB Flasher 5x, Knocker, PC: Intel i5 2500k@4.5Ghz, 8 GB Ram, Zotac GTX 1070 Mini, Win10
VPin: Williams Time Warp Cabinet (1979), 4K playfield: 40" Iiyama X4071UHSU, backglass: 32" LG. Pin2DMD, Pincontrol 1, LEDWiz, nudging, tilt, plunger, 10 big siemens contactors, Shaker, Strobo, Gear, Beacon, RGB Flasher 5x, Knocker, PC: Intel i5 2500k@4.5Ghz, 8 GB Ram, Zotac GTX 1070 Mini, Win10
You need to login in order to like this post: click here
Great job.
For me the ball has too much light, but works perfectYou need to login in order to like this post: click here
Thank you!
You need to login in order to like this post: click here
For me the ball has too much light
it nearly (95%) plays like the real one i own (plays very fast´n strong too) …
VPin: Williams Time Warp Cabinet (1979), 4K playfield: 40" Iiyama X4071UHSU, backglass: 32" LG. Pin2DMD, Pincontrol 1, LEDWiz, nudging, tilt, plunger, 10 big siemens contactors, Shaker, Strobo, Gear, Beacon, RGB Flasher 5x, Knocker, PC: Intel i5 2500k@4.5Ghz, 8 GB Ram, Zotac GTX 1070 Mini, Win10
VPin: Williams Time Warp Cabinet (1979), 4K playfield: 40" Iiyama X4071UHSU, backglass: 32" LG. Pin2DMD, Pincontrol 1, LEDWiz, nudging, tilt, plunger, 10 big siemens contactors, Shaker, Strobo, Gear, Beacon, RGB Flasher 5x, Knocker, PC: Intel i5 2500k@4.5Ghz, 8 GB Ram, Zotac GTX 1070 Mini, Win10
You need to login in order to like this post: click here
Forums are currently locked.
