New Cab – DOF and Pinscape

[Rastan350]

Hi all,

Finally built my own cab. I am having an issue with DOF starting when my Pinscape is connected. If I disconnect my Pinscape I can start DOF tester and activate all of my solenoids. I think the Auto Config part of the DOF is hanging trying to identify the SS when the Pinscape is connected (log below). My Pinscape is only used for my buttons and nudge in the cabinet. I have been beating my head against a wall for 2 days reading and trying everything and it finally dawned on me to remove the Pinscape as a test. I did try to add a Pinscape to the DOF Config Tool and run it but that hasn’t seemed to help either. Any help you can provide would be massively appreciated.

Thanks,

Nick

———————————————————————————
2018.08.28 21:43:59.609 DirectOutput Logger initialized
2018.08.28 21:43:59.609 DirectOutput Version 0.9.5818.37242 as of 2015.12.06 20:41
2018.08.28 21:43:59.609 Global config loaded from: C:\DirectOutput\config\GlobalConfig_B2SServer.xml
2018.08.28 21:43:59.609 Loading Pinball parts
2018.08.28 21:43:59.610 Loading cabinet
2018.08.28 21:43:59.610 Will load cabinet config file: C:\DirectOutput\config\Cabinet.xml
2018.08.28 21:43:59.668 1 output controller defnitions and 1 toy definitions loaded from cabinet config.
2018.08.28 21:43:59.668 Cabinet config file has AutoConfig feature enabled. Calling AutoConfig.
2018.08.28 21:43:59.668 Cabinet auto configuration started

 

You need to login in order to like this post: click here

[Rastan350]

I figured this out and the solution is simple. I adjusted the AutoConfig line in the Cabinet.xml from True to False. Not sure if there is another need for Auto config I might need down the road, but this did it for getting the SS working.

You need to login in order to like this post: click here

[Author]

Posts