- This topic has 2 replies, 2 voices, and was last updated 4 years, 5 months ago by .
Viewing 3 posts - 1 through 3 (of 3 total)
Viewing 3 posts - 1 through 3 (of 3 total)
RELUCTANTLY enabled site for everyone to view for historical reference only. Downloads area not publicly available.
Hi, this has got me in a muddle.
Visual pinball X is all up and running ,
My rig is set in windows.
Screen 2 on top a 1360 x768 tv
Screen 3 in the middle is my 4:3 DMD monitor
Screen 1 is a 1080p screen in portrait mode.
All works as it should.
I installed pinballX and the B2S and DMD are the wrong way around. Now…. In PinballX I was able to fix this by swapping the screens around .. it then all works perfectly ….
However the problem is when I run the tables directly from visual pinball the screens in that are the wrong way around.
I can either have working tables in pinballX OR visual pinball X however not both.
Please advise.
Thanks
You need to login in order to like this post: click here
3 Screen set-up and more
https://www.vpforums.org/index.php?showtopic=33272&page=7#entry346276
Check this
You need to login in order to like this post: click here
Hi
Thanks for the reply, i checked and my settings were as above.
I am getting closer to resolution now, not sure what helped but i installed the new pinballx update – which was 24hrs old so hot off the presses, and also this time went for the 32bit one (default is now 64bit)
anyway, in gameplay everything now is as it should be, both when running directly from visual pinball x AND when running from pinballx frontend.
the backglass and dmd are still on the wrong monitors looking at screenshots on the front end, which i will need to muck about more. 1st world problems i guess :)
thanks
You need to login in order to like this post: click here
Forums are currently locked.
©2024 VPinBall.com