Nip-It (Bally 1973)

[Loserman76]

https://vpinball.com/VPBdownloads/nip-it-bally-1973/

Nip-It (Bally 1973)

https://www.ipdb.org/machine.cgi?id=1680

 

Ok, here’s a surprise one that never got released due to someone dropping off the face of the earth. Got tired of waiting so here it is. Hauntfreaks did the images, lighting etc. I did the table build and scripting.

 

ZIP includes backglass and wheel

You need to login in order to like this post: click here

Total of 35 users thanked author for this post. Here are last 20 listed.

Oroborus, DrRetro, csears2, dabel, xenonph, evileman, flstclasic, Baller38, kwaaizaat, jbg4208, BorgDog, N3roflint, pacboy, kds70, HunterST, Seraph, freezermeat, tmpc, KrakenByte, inframun2

[JR]

So you DID have a Zale up your sleeve!  Looking forward to my next few hours.  Thanks L-man!!

You need to login in order to like this post: click here

[Loserman76]

Odd, I don’t show this as being “approved” yet. @bord can you check?

You need to login in order to like this post: click here

[JR]

You’ve been 404’d.  I’m sure once you’re more established around here that won’t happen ;)  In the meantime, thanks for all the other new tables to check out!  Just done with Amigo and Hang Glider.  Love the ‘distressed’ look of HG.  Off to dial in San Francisco.   Zale can wait.  Thanks again for this amazing window into the past.

You need to login in order to like this post: click here

[Onevox]

Very cool. Thanks Lman. I like these that I see on TV.

For fun, turn the sound down and play it like this… https://m.youtube.com/watch?v=VAIlBVHH9EA

Onevox

 

Onevox

 

You need to login in order to like this post: click here

[xphilou29]

thanks a lot loserman for all your release! you are a machine. really appreciate your work on all those old tables

You need to login in order to like this post: click here

[Thalamus]

Couple of screws missing material holding Primitive145. Same issue for Pin4 on High Deal and Hang Glider. Joker messes my head up a bit from time to time with those reversed flippers. I should be used to them from Humpty Dumpty I guess, but, obviously I’m not. Very nice tables @loserman76, thank you very much.

You need to login in order to like this post: click here

[Scooby]

Thanks Loserman, looks great.

Fun fact, this table was featured at Al’s diner in the show “Happy Days”. It was an error in that timeline, as the show took place in the 1950s..but the pinball table was released in 1973.

You need to login in order to like this post: click here

[captainblack]

Thanks to all those involved in creating this excellent machine. I am trying to figure out how to get the Aligator to grab the ball and send it down the right side alley. Any tips for a beginner please?

You need to login in order to like this post: click here

1 user thanked author for this post.

robertbetor

[vkdawg]

Just curious if there’s a way to set the number of balls to 3 instead of 5?

Can’t quite figure it out.

You need to login in order to like this post: click here

[Author]

Posts