- This topic has 18 replies, 4 voices, and was last updated 3 years, 12 months ago by
.
-
Posts
-
Hey all! Having a devil of a time with Freezy’s brilliant DMD extension, latest version. Can’t seem to get it to recognize my DMD/port 5, and it is also not allowing access. Someone mentioned a problem with the latest update in regard to this issue, but I can’t find the installer for the previous. As always, thank you all so much for the help!
Attachments:
You need to login in order to like this post: click here
Did you try to open your command prompt as admin as well ?
And maybe instead of auto, point it to the correct device with port
You need to login in order to like this post: click here
1 user thanked author for this post.
Alas have tried both. Down to this and FP…hair pulling..lol
You need to login in order to like this post: click here
Can you show what the console prints for “dmdext test -d pindmdv3”?
You need to login in order to like this post: click here
Absolutely! Going to try an earlier update of yours to see if that works. Btw, thank you so much for all of your amazing contributions. This wouldn’t be half as enjoyable without you helping out…
Attachments:
You need to login in order to like this post: click here
Just tried the previous build to no avail. One or two tables work but DMD is blurred and choppy. Rest of the tables alas nothing…thanks again for the help!
You need to login in order to like this post: click here
Hmm which port is it sitting on? Can you try specifying the port as well and show the log? dmdext test -d pindmdv3 -p COM5
You need to login in order to like this post: click here
Hey there, it’s sitting on com5. Here is the log. Works perfect in test.
Attachments:
You need to login in order to like this post: click here
Okay so all good?
You need to login in order to like this post: click here
Alas no. Popped up beautifully on the test, but still not working on fx2/3…:(
yesterday it worked on a few tables but today not so lucky…
thank you!
You need to login in order to like this post: click here
You’ll need to set the same params in dmddevice.ini
[pindmd3]
enabled = true
port = COM5You need to login in order to like this post: click here
Update: actually only about half the tables are working. Most of the Marvel and Star Wars are not, but Alien, Family Guy, violas, etc are working. Oddest thing…
Went thru and made sure all the dmddevice.ini files were set correctly. Works well now if I run the CMD test and then play. Will just run it before playing now. Thank you so much for your patience.
You need to login in order to like this post: click here
Update: actually only about half the tables are working. Most of the Marvel and Star Wars are not, but Alien, Family Guy, violas, etc are working. Oddest thing…
Went thru and made sure all the dmddevice.ini files were set correctly. Works well now if I run the CMD test and then play. Will just run it before playing now. Thank you so much for your patience.Why do you have more then One ? —-> dmddevice.ini
You need to login in order to like this post: click here
Very good question outthere, that’s probably my problem..
Still in the learning phase, so any advice would be so appreciated.
Here’s what I got:
Attachments:
You need to login in order to like this post: click here
@chriss4198
That can cause you some headaches which you have already experienced
I can’t imagine why you have so many C:\xxxxx\xxx\xxxI’m not the expert but I think the only 2 places you should need it is in your VPinMame folder (Visual Pinball\VPinMame) and you’re XDMD folder
You need to login in order to like this post: click here
1 user thanked author for this post.
Thank you! Will clean it all up and see if it helps..
You need to login in order to like this post: click here
Thank you! Will clean it all up and see if it helps..
If all the other ones are just sitting there and doing nothing that’s fine but it makes it hard to keep track of what’s what
But cleaning it up would be the way to goYou need to login in order to like this post: click here
Just have to go thru and see what does what. Have DMD working on VPX and that is it. No FP, etc. Will try not to mess up the VPX DMD.. thanks again
You need to login in order to like this post: click here
Any help with what I should clean up in in regards to my Dmddevice.ini files would be so appreciated. As you can see, I may have gone a wee bit crazy trying to get my fx3/2 and FP working..:)
Attachments:
You need to login in order to like this post: click here
Forums are currently locked.
