- This topic has 5 replies, 3 voices, and was last updated 3 years, 3 months ago by Kibashira.
-
AuthorPosts
-
January 8, 2021 at 2:25 pm #218803
When launching MOTU and STLE from Popper I’m unable to start the games as “1” and “5” are disabled (playfield loses focus). Other PUP pack tables work fine but these two are both using Ultra DMD. Seems as though focus is potentially remaining on the DMD and not going back to the playfield.
I’ve followed the advise on Nailbuster’s wiki and amended the launch (and exit) scripts as follows:
Launch
START “” “[STARTDIR]Launch\VPXSTARTER.exe” 30 15 60 “Visual Pinball Player” 3 0 5
Close
“[STARTDIR]LAUNCH\PUPCLOSER.EXE” WINTIT “Visual Pinball” 15 1
taskkill /f /im “ultradmd.exe”Additionally, both tables behave absolutely fine when launched directly from VPX. Just not when launched from Popper.
I’m running in Exclusive mode (not windowed).
Please help Obi-wan.
You need to login in order to like this post: click here
January 8, 2021 at 3:06 pm #218807the last digit 5 will tell it to press the mouse so keep that #.
the 3 number is the # of seconds after its loaded to press it, so if you need more than 3 seconds you can increase that 3.
What happens if you set 3 to like 20 or 30? Start with a big # and lower it.
You need to login in order to like this post: click here
January 8, 2021 at 3:27 pm #218826No dice unfortunately. Tried with 30 0 5 and 20 0 5 without any apparent change. However the second I clicked the LMB after that focus came straight back and normal service resumed.
You need to login in order to like this post: click here
January 8, 2021 at 3:45 pm #218828@outhere has a solution that works. I can’t find his post but see if he sees this:
You need to login in order to like this post: click here
1 user thanked author for this post.
January 8, 2021 at 4:17 pm #218832Try this — https://vpinball.com/forums/topic/guardians-of-the-galaxy-2/page/24/
You need to login in order to like this post: click here
1 user thanked author for this post.
January 8, 2021 at 5:25 pm #218840Great – that worked like a charm! Thanks.
You need to login in order to like this post: click here
-
AuthorPosts
Forums are currently locked.