Pup player and packs on a two screen cab

[Colonelpacman]

Is there a tutorial anywhere that could point me in the right direction?

 

im aware that a lot of cabs use a separate display for DMD

 

however I’ve also noticed a few pup packs that make a square border for dmd display on the usual backglass output.

 

is this fairly complex to set up, and on a per table basis?

 

any tips or pointers would be great

 

thank you all

You need to login in order to like this post: click here

[TerryRed]

No tutorials….since pup-packs are normally designed with a 3 screen or real DMD setup in mind.

 

As for the pup-packs that DO have a space that could allow for a DMD….all you need to do is edit the pup-pack and set the PuP Screen used for that to OFF. Then you need to position and size your DMd to fit that area for that table.

 

Not all pup-packs will allow for that though.

 

If your BG screen is a “square” screen (not 16:9)…then you can set your PuP Backglass screen’s default size so that it is a proper 16:9 ratio (only using the top 3/4 of the screen). this would allow for space below the pup-pack for your DMd to be displayed. If you are ambitious, you can even add a DMD Speaker panel image as your Windows wallpaper to match…or add an Overlay to the pup-pack to do the same.

 

 

You need to login in order to like this post: click here

1 user thanked author for this post.

Colonelpacman

[Colonelpacman]

Massive help Terry thank you, and for all the videos also you e been a great support in the setup process. Keep up the great work!

 

ill try the change in aspect ratio to accommodate DMD below, would these setting save on a per table basis? Would allow me to experiment with each individually, or would it involve changing every time?

You need to login in order to like this post: click here

[TerryRed]

Colonelpacman wrote:

Massive help Terry thank you, and for all the videos also you e been a great support in the setup process. Keep up the great work!

 

ill try the change in aspect ratio to accommodate DMD below, would these setting save on a per table basis? Would allow me to experiment with each individually, or would it involve changing every time?

If you have a square screen…then just run configpupdisplays.bat and set your backglass and backglass2 pup screens for the 16:9 ratio. Then ALL pup-packs”should” automatically use that.

 

You need to login in order to like this post: click here

[Author]

Posts