Road Show (Williams 1994) DB2S

[chucky87]

https://vpinball.com/VPBdownloads/road-show-williams-1994-db2s-authentic/

Road Show (Williams 1994) DB2S

version V2.0 supports GI which allows to have real animation

thanks to 32 assassins for the diagram and the codes of GI strings

 

You need to login in order to like this post: click here

Total of 23 users thanked author for this post. Here are last 20 listed.

romerodigital, Ronaldvg, FekeFez, Goldchicco, sneakily1, Colvert, workerboy, g5k, csears2, kwaaizaat, Badazzwi, Blamer, Peter222, flstclasic, STAT, Genesis38, marie, robobet, Thalamus, Jopp

[32assassin]

I mapped all the 90s williams / Bally   backglasses

GI String 1 = Brown

GI String 2 = Orange

GI String 3 = Yellow

Only problem is that I don’t think the B2s designer has support for the Williams GI string,  you might need to modify the table script and map the GI calls to a temp B2s data id

and use that id in the B2s editor

 

see a table you like help me find the resources so that I can finish it
https://www.dropbox.com/sh/7qtake9whi5ium2/AAB4K4W78oMVlqSxTzKtGHTHa?dl=0

You need to login in order to like this post: click here

2 users thanked author for this post.

Naboodiver, KrakenByte

[chucky87]

Great again thank you 32 assassins I’ll watch her.

You need to login in order to like this post: click here

[chucky87]

32 assasins thank you that’s good it works very well. The backglass designer software perfectly manages the GI strings.

I put the V2 online with GI support

do you have the same for terminator 2 with color codes?

 

thank you

You need to login in order to like this post: click here

[32assassin]

I just updated my behind the backglass pack

https://vpinball.com/VPBdownloads/backlass-layout-pictures/

the only thing is that I have no way of identifying the Solenoids.  I saved images from the service manual

you can identify what solenoids are mapped to the backglass but their is no way to add them to the correct place.

T2 uses Sol 18,19,20,22,23 and 24.  they go to the red lights but no clue where each light goes.

 

I have them all  mapped; well most of them

The Flintstones needs the upper right lights confirmed (I did not find a full pic)

 

I have  no clue on what to add (other then the GI lights) for this 2 tables.

I have the layout image,  but they have multiple lights (that are off) that need to be mapped to an ID

Black Knight 2000,   Electra

see a table you like help me find the resources so that I can finish it
https://www.dropbox.com/sh/7qtake9whi5ium2/AAB4K4W78oMVlqSxTzKtGHTHa?dl=0

You need to login in order to like this post: click here

[Author]

Posts