- This topic has 11 replies, 4 voices, and was last updated 5 years, 2 months ago by randr.
-
AuthorPosts
-
January 26, 2019 at 7:23 am #111103
SHAKER:Â Â S1 I28/S2 I28/S6 I32/S8 I32/S35 I32/W38 I28/W42 600 I32/W48 300 I32/W58 300 I32
For individual table settings which values would I change to lower the shaker intensity ?  The above line is from the DOF config tool.
My shaker gets very violent on certain tables, I am running the default at 8 ..
Thanks !
You need to login in order to like this post: click here
January 26, 2019 at 9:28 am #111172Trigger S is for Solenoid, W is for switch and The I is for intensity
The 300 is for time
Some items need a time value
Lower the I value
W48 300 I32
–
If your default Max is 8 I wonder why it’s going so violent?Could you post and link to the game?
You need to login in order to like this post: click here
January 26, 2019 at 9:48 am #111176https://vpinball.com/VPBdownloads/tales-of-the-arabian-nights-skitso-detail-mod/
You need to login in order to like this post: click here
January 26, 2019 at 3:22 pm #111256I did some DOF testing hitting the Genie
I did some shaker Motor testing from the rom like thisI only have this statement in the DOF site for the shaker – S35 300 I7
If I set the default high (Max Intensity) and the intensity low for the game the shaker runs slow
If I set the default low (Max Intensity) and the setting for the game Hi then the shaker runs slow S35 300 I37
If I set both high the shaker runs fast so that all seems to be working fine…Then I did some testing with the Normal play of game Using ball control when I hit the genie the shaker will do whatever it wants
If I have the Max intensity set low and Game intensity set low the shaker will run slow, Fast and sometimes both within the same hitYou need to login in order to like this post: click here
January 26, 2019 at 5:33 pm #111308So the vanish magnet runs the shaker .?  I couldn’t find a shaker in the manual.  Thanks for trouble shooting – must be missing something simple – what would make it be so random.
You need to login in order to like this post: click here
January 26, 2019 at 6:23 pm #111309Shaker simulates the magnets in pinball very good. So it’s used very lightly on magnets in many configs. Perfect if you ask me but should not be anything crazy that’s for sure
********************************************************
Messing with the VPinball app and push notifications.
So if you haven't downloaded app yet what are you waiting for!?
for IOS and Android********************************************************
You need to login in order to like this post: click here
January 26, 2019 at 7:17 pm #111312If the shaker goes faster than what the Max Intensity setting is….
what does the Max setting doYou need to login in order to like this post: click here
January 26, 2019 at 8:54 pm #111315I have not noticed that happening
********************************************************
Messing with the VPinball app and push notifications.
So if you haven't downloaded app yet what are you waiting for!?
for IOS and Android********************************************************
You need to login in order to like this post: click here
January 27, 2019 at 3:49 am #111323Again. No expert. To me it sounds like you’ve found a bug @outhere.
You need to login in order to like this post: click here
January 27, 2019 at 12:04 pm #111408Thanks Thalamus, Randr, and Outhere for chimming in – i have set the max intensity all the way down to 4 which lessens the intensity until the crazy one takes off, it just seems like a timer issue where it is letting it run to long and also a higher intensity than intended. Since I know myself and outhere have the same setup for this, maybe the answer lies somewhere here. Randr would you be so kind as to share your Shaker brand and controller – basically your general setup for this. Maybe that could point us in the right direction, since yours doesn’t have seizures when you play.  Thanks again fellas much appreciated !!
You need to login in order to like this post: click here
January 27, 2019 at 3:21 pm #111494Shaker Motor Kit – Wiring
https://vpinball.com/forums/topic/shaker-motor-kit-wiring/
You need to login in order to like this post: click here
January 27, 2019 at 4:00 pm #111501I use real shaker available from places like pinball life and a simple H-Bridge and ledwiz have had this same setup for like 5-6 years without a single issue
********************************************************
Messing with the VPinball app and push notifications.
So if you haven't downloaded app yet what are you waiting for!?
for IOS and Android********************************************************
You need to login in order to like this post: click here
1 user thanked author for this post.
-
AuthorPosts
Forums are currently locked.