This topic contains 188 replies, has 56 voices, and was last updated by  Scottywic 12 hours, 24 minutes ago.

Viewing 20 posts - 121 through 140 (of 189 total)
  • Author
    Posts
  • #84919
     Mark70 
    Participant
    Member

    Just a reminder, this table is the current game of the week here on vpinball!
    So show some points  :)

    #84938
     Thalamus 
    Participant
    ContributorMember

    I haven’t even installed the table yet. It requires popper doesn’t it ?

    #84939
     randr 
    Keymaster
    ModeratorMember

    Install it. Table worth it and the front end is great too!

    We need a POP front end signature!!! Or no?

    #84940
     Thalamus 
    Participant
    ContributorMember

    I’ve seen table video and yes, looks awesome. Popper. No rush.

    #84946
     Johngreve 
    Participant
    Member

    I haven’t even installed the table yet. It requires popper doesn’t it ?

    Install it….it’ll blow your mind!
    Popper not required to play the table….just PUP ver 1.3

    #84947
     TerryRed 
    Moderator
    MemberContributorModerator

    To make it easier….you require PinUP System to be installed. This will install both Popper and Player.

    However, you do not need to use Popper for this PuP table or any PuP-Packs.

     

    #84948
     randr 
    Keymaster
    ModeratorMember

    yeah you don’t NEED to use frontend.

    I have Microsoft office installed but never use powerpoint  :wacko:

     

    We need a POP front end signature!!! Or no?


    Some users who have liked this topic:

    • avatar
    • avatar
    1 user thanked author for this post.
    #87978
     Meek424424 
    Participant

    I am having an issue getting this one to run. I have the latest VPX 10.5 Beta (rev3434), the latest VPinMame (SAMBuild r4515).

    I don’t have any other issues, however when I launch this table I get the following error. “Line 1660: ActiveX component can’t create object: ‘UltraDMD.DMDObject'”.

    I am able to launch the older version (v3.37) and it seems to work fine.

    Any ideas on what my problem is? Thanks in advance for the assitance!

    Attachments:
    #88021
     Koolywiz 
    Participant

    Great table.


    Some users who have liked this topic:

    • avatar
    #88156
     Meek424424 
    Participant

    I am having an issue getting this one to run. I have the latest VPX 10.5 Beta (rev3434), the latest VPinMame (SAMBuild r4515).

    I don’t have any other issues, however when I launch this table I get the following error. “Line 1660: ActiveX component can’t create object: ‘UltraDMD.DMDObject’”.

    I am able to launch the older version (v3.37) and it seems to work fine.

    Any ideas on what my problem is? Thanks in advance for the assitance!

    I no longer have this issue. I deleted the table and then added it again. It works like a champ. Great Table! Amazing work. Thank you for all the hard work on such a wonderful and fun table.

    #88186
     Campa 
    Participant

    i have an issue with the backglass. I set size from pinUpdisplay setup, but that’s what i see:


    :wacko:

    Attachments:
    #88261
     Vizzini 
    Participant

    Verify that your desktop scaling is at 100%.


    Some users who have liked this topic:

    • avatar
    • avatar
    1 user thanked author for this post.
    #88381
     Campa 
    Participant

    Verify that your desktop scaling is at 100%.

    I check my settings and i think it’s ok  :scratch:

    I use a dvi cable for the display 3. i don’t know what i do! maybe check vlc settings?

     

    Attachments:
    #88500
     Campa 
    Participant

    I’m in a sort of zoom mode.

    I changed settings from pinUpdisplay but it’s the same!

    :scratch:

    Someone who can help me?

    Attachments:
    #88503
     randr 
    Keymaster
    ModeratorMember

    Is your backglass dpi at 100 percent in windows display settings?

    We need a POP front end signature!!! Or no?


    Some users who have liked this topic:

    • avatar
    #88547
     Campa 
    Participant

    Is your backglass dpi at 100 percent in windows display settings?

    right now! thanks  :good:

    It’s my first pinUp table! fantastic!

    i’m going to download Tron pinUp version!!!

    B-)


    Some users who have liked this topic:

    • avatar
    • avatar
    #88548
     TerryRed 
    Moderator
    MemberContributorModerator

    Is your backglass dpi at 100 percent in windows display settings?

    right now! thanks :good:

    It’s my first pinUp table! fantastic!

    i’m going to download Tron pinUp version!!!

    B-)

    I recommend getting any version of the Tron Legacy table (not the PuP Edition), and use my Max Pack PuP-Pack with it. You must have PuP-Capture working correctly for any of the PuP-Packs.


    Some users who have liked this topic:

    • avatar
    1 user thanked author for this post.
    #88815
     Guga 
    Participant

    Hello, thank you for sharing.
    How to make ultraDMD appear. It is only shown at the beginning and then no longer appears. I already checked the script and it’s ok. (turnonultradmd = 1). The rest is working right.
    Thanks again.  :good:

    I recommend getting any version of the Tron Legacy table (not the PuP Edition), and use my Max Pack PuP-Pack with it. You must have PuP-Capture working correctly for any of the PuP-Packs.

    Hi TerryRed.
    I have a two screen setup, the BG being 1280×1024. Do these packages work in this configuration? If so, which package should I download?
    Thank you.

    #89222
     grendelrt 
    Participant

    Great table, lots of fun!! Couple quick questions,

    I have noticed when exiting this table my adressable leds stay in the last “on” position they were when the table exits. So on the attraction screen some of the leds are lit red and stay red if i exit, this doesn’t happen on other tables, is there a way to fix this (right now I just load another table and they blank back out )?

    Is there any way to adjust the SSF volume independent from the table volume?

    Thanks to all the people who made this one!!

    #89223
     randr 
    Keymaster
    ModeratorMember

    try adding this at end of script to force close dof …

    Sub Table1_Exit
    Controller.Stop
    End Sub

    assuming table is named “table1”

    not sure on SSf volume

    We need a POP front end signature!!! Or no?

    1 user thanked author for this post.
Viewing 20 posts - 121 through 140 (of 189 total)

You must be logged in to reply to this topic.

©2018 VPinBall.com

WP Facebook Auto Publish Powered By : XYZScripts.com
Vpinball.com

Log in with your credentials

or    

Forgot your details?

Create Account