Teenage Mutant Ninja Turtles (Data East)

[Sliderpoint]

Nice work!  Looks great!

Although I think I suck… I can not save April.  The ball refuses to hit the target off the orbit for me (about 0-30 so far…).  Can someone else just verify it’s makable?

-Mike

You need to login in order to like this post: click here

[Skitso]

Thanks a bunch guys, an amazing recreation of the real one.

Few issues:

-I once got a stuck ball in the left outlane

-If turtle weapons mod is enabled, the upper right hand turtle doesn’t have his swords.

-If I change sound volume (via F12), flippers won’t work after that. Havn’t found any volume settings in the rom menu. (pressing 7 and expand adj)

-Performance drops in multiball. All the tables I have run flawlessly 165hz on my system, even the new G5K AFM. This table is 165hz too, but as soon as I get a multiball, the performance drops to 120-130hz.

You need to login in order to like this post: click here

[Skyrider]

Thank you very much for this wonderful release and all the work that was made by the whole team behind it. 

Sadly I have a little issue with the DMD (Desktop mode). I use the newest VPX beta and the newest Vpinmame. Does anyone have an idea?

Best regards

You need to login in order to like this post: click here

[takut]

Wow, what an awesome table. Thanks for sharing this beauty 

You need to login in order to like this post: click here

[xenonph]

You can try right clicking on the DMD and press restore DMD size.

Or right click on the DMD and uncheck Show Border,  Show Title.

Or you can go to Line 260 in the table script and uncomment it.(Remove the ‘ at beginning of Line 260)(So the letters are not green, as seen in pic.)

I had to do this and set it to 0 to replicate your DMD, so with it set to 1, it should fix your DMD.

Hope this helps.

Great table you guys!!!

Thanks!!

 

Attachments:

1. 

   Capture-3.png
   

You need to login in order to like this post: click here

5 users thanked author for this post.

darren180913, Vladdo, sam80, Magnus, Skyrider

[snwfrd38]

wow nice! Just to report I can’t play it – it’s the first time a table crashes my VPX (10.5).

It loads up / table & b2s show up the rom plays and starts to talk “Teeanage” and then after 2s it crashes VPX.

My setup is clean – all recently freshly installed and all tables from various sites (Monsterbash, here and VPForums) are working flawlessly.

I welcome any idea to test this beauty   

You need to login in order to like this post: click here

[Skyrider]

Thanks a lot Xenonph,

I had to change the script to make it work. Thanks for your help!!

You need to login in order to like this post: click here

[Josh]

I made the mistake of showing screenshots of this to my four year old son 3 weeks ago.  He has asked everyday about the table.  I told him today after Karate the turtle table would be ready for him.  Needless to say had a hard time getting him to daycare today.  CP thank you for all of the hard work in making this table to totally tubular.  I will be the hero dad when matthew gets home, but all of you that put in the hard work deserve all of the credit.  Thanks again!

You need to login in order to like this post: click here

[robbo43]

Thanks to all involved with creating this table. A lot of effort has gone in and it really shows

Rob

You need to login in order to like this post: click here

[wrd1972]

Sliderpoint wrote:

Nice work! Looks great!

Although I think I suck… I can not save April. The ball refuses to hit the target off the orbit for me (about 0-30 so far…). Can someone else just verify it’s makable?

-Mike

Hey Mike,

That particular shot was very difficult to get right. In order for the ball to strike the target, it needs to ride the back wall perfectly, to propoerly strike the target. The last time I tweaked, I had to adjust the large rear rubber to ensure that the ball was not deflected, prior to hitting the wall. So the last time I tested it, it seemed to be working fine. I will check it again, but it might be a day or two. But in the short term, you can add a knocker sound for when the target is struck, just to ensure it is actually being hit or missed.

 

IIRC, there is not a dramatic or really noticeable “effect”, even when that target is hit. But adding a knocker sound can help be certain, whether it is being hit or not.

My VP Pincab /MAME Arcade Specs: MSI Micro-ATX Z390m MOBO, Core I5-9600K CPU @ 3.70GHz, 16GB NVRAM, Nvidia 1660 Super,

40" PF Sony gaming LED TV, Dual 23" monitors in the backbox , Pinscape w. expansion board, Full DOF - Full MAME arcade support

My VP Pincab /MAME Arcade Specs: MSI Micro-ATX Z390m MOBO, Core I5-9600K CPU @ 3.70GHz, 16GB NVRAM, Nvidia 1660 Super,

40" PF Sony gaming LED TV, Dual 23" monitors in the backbox , Pinscape w. expansion board, Full DOF - Full MAME arcade support

You need to login in order to like this post: click here

1 user thanked author for this post.

Ben Logan2

[cyberpez]

Glad everyone is enjoying the table!!  It was fun to work on, and compared to some of my other builds went really quick and smooth even with the playfield redraw.  I know with the redraw there was one or two areas that did not quite line up in the end, but I doubt anyone would ever find them.

HF just sent me an updated table that he worked his magic on, dropped the files size in half O_O.  My guess is that will fix most people’s performance issues.

xenonph to the rescue again.  I had that same issue with the dmd and it drove me nuts for a while.  Uncomment that sections, then once its fixed you can comment it back out if you want.

As for the Save April, yeah like Wrd said he spent quite a bit of time trying to get that right.  Also the call out when you make the shot is pretty lame, so it’s easy to miss.  You would expect some sort of thank you or something    I tweaked the wall in the spinner lane a hair, but will let Wrd have the final say when he gets to it.  I do know that I suck at making the shot when I need to, but have hit the target before.

Not sure on the ball stuck in the left out lane, I’ve not seen that before.  Anyone else?  Screenshot?

Thanks Draifet, missing screw is fixed and lowered them both so the fit onto the post better.  You look for those kinda things for weeks and a few still slip by.  Also fixed the light cutting through the left flasher.  Left the blooms big because :P

I’m going to double check a few more thing then post the update.

You need to login in order to like this post: click here

3 users thanked author for this post.

Ben Logan2, Draifet, xenonph

[vogliadicane]

fantastic work here! Plays and looks superbe, thanks a lot!

You need to login in order to like this post: click here

[Sven34]

I do not need the Rome TNMT_104 104g Wrong link to Rome

You need to login in order to like this post: click here

[exodus_cl]

Happyness for the weekend , thanks buddy, amazing work!!!!

You need to login in order to like this post: click here

[Magnus]

Great table! Got a small problem though. Running the table as desktop and the

dmd looks strange. Dragged out vertical somehow. 

You need to login in order to like this post: click here

[senseless]

Wauw! Looking freaking awesome!! Thanks for this super duper release :).

Running 10.5 final and latest beta sam but getting an error using solenoids=2 (fastflips). Do I need to do something additionally?

You need to login in order to like this post: click here

[cyberpez]

Magnus wrote:

Great table! Got a small problem though. Running the table as desktop and the

dmd looks strange. Dragged out vertical somehow.

In my best announcer voice from Scared Stiff… “Look Up”  xenonph posted this fix with a nice screenshot.

 

Version 1.1 is up.  File size in half, so hopefully fixed performance issues some are having.  I did tweak the spinner lane wall a bit and nailed the target a couple times, 4 out of 5ish I think.  A couple other small things.

You need to login in order to like this post: click here

1 user thanked author for this post.

xenonph

[cyberpez]

senseless wrote:

Wauw! Looking freaking awesome!! Thanks for this super duper release :).

Running 10.5 final and latest beta sam but getting an error using solenoids=2 (fastflips). Do I need to do something additionally?

I thought I’d turned it on by default?  Or?  sorry if not the Fastflips stuff is new to me.

Attachments:

1. 

   ff.jpg
   

You need to login in order to like this post: click here

[Sven34]

Okay Sorry guys, Thank you for the update 

You need to login in order to like this post: click here

[HauntFreaks]

if any DT users are interested in another backdrop… I was playing around and made this
download link below

Attachments:

1. Backdrop2.zip

You need to login in order to like this post: click here

3 users thanked author for this post.

Draifet, Pinbolt, xenonph

[Author]

Posts