Topic: Teensy dof not responding – Page 2

This topic has 28 replies, 3 voices, and was last updated 3 years, 7 months ago by chicagobears1977.

Viewing 9 posts - 21 through 29 (of 29 total)

← 1 2

Author

Posts
September 8, 2020 at 6:29 pm #200322
chicagobears1977
Participant
@chicagobears1977
and i get this

irectOutput Version 3.1.7527.20768, built 2020.08.10 11:32
MJR Grander Unified DOF R3++ edition feat. Djrobx, Rambo3, and Freezy
DOF created by SwissLizard | https://github.com/mjrgh/DirectOutput
2020.09.08 18:27:28.870 DirectOutput Logger initialized
2020.09.08 18:27:28.851 Finishing framework
2020.09.08 18:27:28.853 Finishing cabinet
2020.09.08 18:27:28.853 Debug: Finishing output controllers
2020.09.08 18:27:28.853 Debug: Output controllers finished
2020.09.08 18:27:28.853 Cabinet finished
2020.09.08 18:27:28.853 DirectOutput framework finished.
2020.09.08 18:27:28.853 Bye and thanks for using!
2020.09.08 18:27:28.855 Global config filename is “C:\DirectOutput\config\GlobalConfig_b2SServer.xml”
2020.09.08 18:27:28.870 Global config loaded from: C:\DirectOutput\config\GlobalConfig_b2SServer.xml
2020.09.08 18:27:28.870 Loading Pinball parts
2020.09.08 18:27:28.870 Loading cabinet
2020.09.08 18:27:28.871 Will load cabinet config file: C:\DirectOutput\Config\cabinet.xml
2020.09.08 18:27:29.204 EXCEPTION: Could not load cabinet config from XML data.
2020.09.08 18:27:29.204 EXCEPTION: Thread:
2020.09.08 18:27:29.204 EXCEPTION: Message: Exception –> Could not deserialize the cabinet config from XML data.
2020.09.08 18:27:29.204 EXCEPTION: A exception occured when loading cabinet config file: C:\DirectOutput\Config\cabinet.xml
2020.09.08 18:27:29.204 EXCEPTION: Thread:
2020.09.08 18:27:29.204 EXCEPTION: Message: NullReferenceException –> Object reference not set to an instance of an object.
2020.09.08 18:27:29.206 EXCEPTION: Stacktrace: at DirectOutput.Log.Exception(String Message, Exception E)
2020.09.08 18:27:29.206 EXCEPTION: Stacktrace: at DirectOutput.Cab.Cabinet.GetCabinetFromConfigXml(String ConfigXml)
2020.09.08 18:27:29.206 EXCEPTION: Stacktrace: at DirectOutput.Cab.Cabinet.GetCabinetFromConfigXmlFile(String FileName)
2020.09.08 18:27:29.206 EXCEPTION: Stacktrace: at DirectOutput.Cab.Cabinet.GetCabinetFromConfigXmlFile(FileInfo CabinetConfigFile)
2020.09.08 18:27:29.206 EXCEPTION: Stacktrace: at DirectOutput.Pinball.Setup(String GlobalConfigFilename, String TableFilename, String RomName)
2020.09.08 18:27:29.206 EXCEPTION: Targetsite: Void Exception(System.String, System.Exception)
2020.09.08 18:27:29.206 No cabinet config file loaded. Will use AutoConfig.
2020.09.08 18:27:29.206 Cabinet auto configuration started
2020.09.08 18:27:29.224 Detected and added PacLed64 Id 1 with name PacLed64 1
2020.09.08 18:27:29.224 Added LedwizEquivalent Nr. 20 with name PacLed64 1 Equivalent 1 for PacLed64 with Id 1
2020.09.08 18:27:29.225 PacDriveSingleton.PacUIOGetIdList: i=0, numdevices=1, DeviceType=PacLED64
2020.09.08 18:27:29.226 PhilipsHueAutoConfigurator.AutoConfig started…note, actual connection detection will happen asynchronously, and device disabled if not succesfull (check further down in the log)
2020.09.08 18:27:29.230 LedWiz-like device at VID=26881, PID=4644, product string=<not available>, manufacturer string=<not available>
2020.09.08 18:27:29.232 LedWiz-like device at VID=121, PID=6, product string=Generic USB Joystick , manufacturer string=DragonRise Inc.
2020.09.08 18:27:29.233 LedWiz-like device at VID=26881, PID=4644, product string=<not available>, manufacturer string=<not available>
2020.09.08 18:27:29.234 LedWiz-like device at VID=53769, PID=5121, product string=Ultimarc, manufacturer string=Ultimarc
2020.09.08 18:27:29.238 Cabinet auto configuration finished
2020.09.08 18:27:29.238 Cabinet loaded
2020.09.08 18:27:29.238 Loading table config
2020.09.08 18:27:29.238 No TableFilename specified, will use empty tableconfig
2020.09.08 18:27:29.238 Will try to load configs from DirectOutput.ini or LedControl.ini file(s) for RomName doflinx
2020.09.08 18:27:29.240 Loading LedControl file C:\DirectOutput\Config\directoutputconfig20.ini
2020.09.08 18:27:29.245 Min DOF Version is 0.8 for file directoutputconfig20.ini

You need to login in order to like this post: click here
September 8, 2020 at 6:34 pm #200323
outhere
Moderator
@outhere
chicagobears1977 wrote:

doflinx.exe is run

When testing do not have doflinx.exe running
What game are you testing with?

You need to login in order to like this post: click here
September 8, 2020 at 6:37 pm #200324
chicagobears1977
Participant
@chicagobears1977
im testing with theater of magic but for some reason the output log file wont generate. how do i stop linx from running?

You need to login in order to like this post: click here
September 8, 2020 at 6:41 pm #200325
outhere
Moderator
@outhere
chicagobears1977 wrote:

im testing with theater of magic but for some reason the output log file wont generate. how do i stop linx from running?

Right click your task bar and go to task manager and kill it off in their

You need to login in order to like this post: click here
September 8, 2020 at 6:46 pm #200326
chicagobears1977
Participant
@chicagobears1977
ok done but the config file is not generating

You need to login in order to like this post: click here
September 8, 2020 at 6:51 pm #200327
outhere
Moderator
@outhere
chicagobears1977 wrote:

ok done but the config file is not generating

It’s not generating — DirectOutput.log
Your using this DOF — https://www.vpforums.org/index.php?showtopic=39557&hl=

You need to login in order to like this post: click here
September 8, 2020 at 7:02 pm #200328
chicagobears1977
Participant
@chicagobears1977
ok im getting this nowDirectOutput Version 3.1.7527.20768, built 2020.08.10 11:32
MJR Grander Unified DOF R3++ edition feat. Djrobx, Rambo3, and Freezy
DOF created by SwissLizard | https://github.com/mjrgh/DirectOutput
2020.09.08 19:00:12.113 DirectOutput Logger initialized
2020.09.08 19:00:12.081 Global config filename is “C:\DIRECTOUTPUT\config\GlobalConfig_B2SServer.xml”
2020.09.08 19:00:12.113 Global config loaded from: C:\DIRECTOUTPUT\config\GlobalConfig_B2SServer.xml
2020.09.08 19:00:12.114 Loading Pinball parts
2020.09.08 19:00:12.114 Loading cabinet
2020.09.08 19:00:12.115 Will load cabinet config file: C:\DirectOutput\Config\cabinet.xml
2020.09.08 19:00:12.439 EXCEPTION: Could not load cabinet config from XML data.
2020.09.08 19:00:12.439 EXCEPTION: Thread:
2020.09.08 19:00:12.439 EXCEPTION: Message: Exception –> Could not deserialize the cabinet config from XML data.
2020.09.08 19:00:12.439 EXCEPTION: A exception occured when loading cabinet config file: C:\DirectOutput\Config\cabinet.xml
2020.09.08 19:00:12.439 EXCEPTION: Thread:
2020.09.08 19:00:12.439 EXCEPTION: Message: NullReferenceException –> Object reference not set to an instance of an object.
2020.09.08 19:00:12.440 EXCEPTION: Stacktrace: at DirectOutput.Log.Exception(String Message, Exception E)
2020.09.08 19:00:12.440 EXCEPTION: Stacktrace: at DirectOutput.Cab.Cabinet.GetCabinetFromConfigXml(String ConfigXml)
2020.09.08 19:00:12.440 EXCEPTION: Stacktrace: at DirectOutput.Cab.Cabinet.GetCabinetFromConfigXmlFile(String FileName)
2020.09.08 19:00:12.440 EXCEPTION: Stacktrace: at DirectOutput.Cab.Cabinet.GetCabinetFromConfigXmlFile(FileInfo CabinetConfigFile)
2020.09.08 19:00:12.440 EXCEPTION: Stacktrace: at DirectOutput.Pinball.Setup(String GlobalConfigFilename, String TableFilename, String RomName)
2020.09.08 19:00:12.440 EXCEPTION: Targetsite: Void Exception(System.String, System.Exception)
2020.09.08 19:00:12.440 No cabinet config file loaded. Will use AutoConfig.
2020.09.08 19:00:12.441 Cabinet auto configuration started
2020.09.08 19:00:12.536 Detected and added PacLed64 Id 1 with name PacLed64 1
2020.09.08 19:00:12.538 Added LedwizEquivalent Nr. 20 with name PacLed64 1 Equivalent 1 for PacLed64 with Id 1
2020.09.08 19:00:12.542 PacDriveSingleton.PacUIOGetIdList: i=0, numdevices=1, DeviceType=PacLED64
2020.09.08 19:00:12.545 PhilipsHueAutoConfigurator.AutoConfig started…note, actual connection detection will happen asynchronously, and device disabled if not succesfull (check further down in the log)
2020.09.08 19:00:12.556 LedWiz-like device at VID=26881, PID=4644, product string=<not available>, manufacturer string=<not available>
2020.09.08 19:00:12.559 LedWiz-like device at VID=121, PID=6, product string=Generic USB Joystick , manufacturer string=DragonRise Inc.
2020.09.08 19:00:12.559 LedWiz-like device at VID=26881, PID=4644, product string=<not available>, manufacturer string=<not available>
2020.09.08 19:00:12.560 LedWiz-like device at VID=53769, PID=5121, product string=Ultimarc, manufacturer string=Ultimarc
2020.09.08 19:00:12.567 Cabinet auto configuration finished
2020.09.08 19:00:12.567 Cabinet loaded
2020.09.08 19:00:12.567 Loading table config
2020.09.08 19:00:12.568 Warning: No table config file found. Will try to load config from LedControl file(s).
2020.09.08 19:00:12.568 Will try to load configs from DirectOutput.ini or LedControl.ini file(s) for RomName tom_14hb
2020.09.08 19:00:12.570 Loading LedControl file C:\DirectOutput\Config\directoutputconfig20.ini
2020.09.08 19:00:12.583 Min DOF Version is 0.8 for file directoutputconfig20.ini
2020.09.08 19:00:12.583 Resolving Tables Variables
2020.09.08 19:00:12.584 Resolving Global Variables
2020.09.08 19:00:13.080 Loading LedControl file C:\DirectOutput\Config\directoutputconfig30.ini
2020.09.08 19:00:13.091 Min DOF Version is 0.8 for file directoutputconfig30.ini
2020.09.08 19:00:13.091 Resolving Tables Variables
2020.09.08 19:00:13.092 Resolving Global Variables
2020.09.08 19:00:14.195 2 directoutputconfig.ini or ledcontrol.ini files loaded.
2020.09.08 19:00:14.198 Config for RomName tom_14hb exists in LedControl data. Updating cabinet and config.
2020.09.08 19:00:14.217 Table config loading finished: romname=tom_14hb, tablename=Theatre of Magic (Bally 1995) 2.0
2020.09.08 19:00:14.218 Pinball parts loaded
2020.09.08 19:00:14.218 Starting processes
2020.09.08 19:00:14.218 Initializing cabinet
2020.09.08 19:00:14.218 Debug: Initializing output controllers
2020.09.08 19:00:14.220 PacLed64 Id:1 initialized and updater thread started.
2020.09.08 19:00:14.220 Debug: Output controllers initialized
2020.09.08 19:00:14.223 Cabinet initialized
2020.09.08 19:00:14.225 Loading shape definition file: C:\DirectOutput\Config\DirectOutputShapes.xml
2020.09.08 19:00:14.256 Framework initialized.
2020.09.08 19:00:14.256 Have fun! :)
2020.09.08 19:00:41.627 Finishing framework
2020.09.08 19:00:41.628 Finishing cabinet
2020.09.08 19:00:41.629 Debug: Finishing output controllers
2020.09.08 19:00:42.844 PacLed64 Id:1 finished and updater thread stopped.
2020.09.08 19:00:42.844 Debug: Output controllers finished
2020.09.08 19:00:42.844 Cabinet finished
2020.09.08 19:00:42.844 DirectOutput framework finished.
2020.09.08 19:00:42.844 Bye and thanks for using!

You need to login in order to like this post: click here
September 8, 2020 at 7:17 pm #200329
outhere
Moderator
@outhere
@chicagobears1977
At this point what I would do is disconnect all the other items so only the matrix is hooked up adjust your cabinet file to match

You need to login in order to like this post: click here
September 8, 2020 at 9:14 pm #200337
chicagobears1977
Participant
@chicagobears1977
Thanks for your help outhere. I appreciate the time to help me. I finally got the whole setup working. I had to reload the hex file so the cabinet xml would load. For anyone needing help it was the Alpha 101 hex file.

Thanks again.

Chicagobears1977

You need to login in order to like this post: click here
Author

Posts