- This topic has 1 reply, 2 voices, and was last updated 4 years, 9 months ago by -RpT.
-
AuthorPosts
-
July 16, 2019 at 9:30 pm #137072
Anyone have experience with the below monitors? I have a price range of around $400-$500. I have read that a monitor is preferred due to lag with the flippers and I am very sensitive to delays/lag and it will drive me nuts if there is anything significant. Am I off base or should I just wait and go with an even more expensive Dell/Philips up to around $800? I played a Pinball FX cabinet at a local gaming place and the graphics were garbage with lag and slow graphics.
Or what is the best 43″ monitor? I’m trying to save for a monitor and also plan dimensions of a cabinet build over the next couple of months.
Any other ideas would be appreciated.
ACER 43″Â DM431K bmiiipx
In-Plane Switching (IPS) Panel
DisplayPort | HDMI | VGA Inputs
3840 x 2160 4K UHD Resolution
100,000,000:1 Dynamic Contrast Ratio
250 cd/m² Brightness
178°/178° Viewing Angles
5 ms Response Time
60 Hz Refresh Rate
1.07 Billion Colors
https://www.acer.com…el/UM.MD1AA.001LG 43UD79-B 43″
In-Plane Switching (IPS) Technology
HDMI + DisplayPort + USB Type-C Inputs
3840 x 2160 Resolution
Mega Dynamic Contrast Ratio
350 cd/m² Brightness
178°/178° Viewing Angles
5 ms (GtG) Response Time
60 Hz Refresh Rate
1.06 Billion Colors
https://www.lg.com/u…uhd-led-monitorPhilips BDM4350UC I see is used also.
You need to login in order to like this post: click here
July 24, 2019 at 6:20 am #138473Running the ET430K 43″ by Acer (as are many others) and it’s a great 4K playfield… That being said, someone on one of the Facebook groups mentioned that Acer is planning on bringing out a 43″, 4K, 144Hz monitor sometime in the near future (where currently we are maxed out at 60fps this would allow for a lot higher frame rates). Potentially worth the wait – i would even consider an upgrade from my current screen since even getting about 90fps is noticeably a LOT smoother in games.
You need to login in order to like this post: click here
-
AuthorPosts
Forums are currently locked.