- This topic has 256 replies, 110 voices, and was last updated 3 years ago by
.
-
Posts
-
I love this table THX for building it
You need to login in order to like this post: click here
1 user thanked author for this post.
Table flipper are set up fine but at the end of the game it says enter your initials for high score but it wont do anything. any thoughts
You need to login in order to like this post: click here
Table flipper are set up fine but at the end of the game it says enter your initials for high score but it wont do anything. any thoughts
Go back through this complete topic you might find the answer you’re looking for
You need to login in order to like this post: click here
I’m stumped. I can run this table fine directly from VPX, but when I try to run it from Popper, it will not load. The backglass loads, but the table does not…it just stays blank and puts my playfield monitor back to the windows desktop.
I have 200 tables on my cabinet, including about 30 PUP tables and this is the only one giving me an issue….any thoughts?
You need to login in order to like this post: click here
Having trouble getting this to work. Ball comes out very slowly, then unable to launch it. Tried re-downloading/installing the vpx and rom, deleting nvram and cfg. Not sure what else to try?
video:
You need to login in order to like this post: click here
I absolutely love this game and want to say thank you so much for all the work. I was looking around to see if anyone has the same problem with DMD as I am where it appears not to be showing the full scores ie: 2nd player.
You need to login in order to like this post: click here
1 user thanked author for this post.
The table really is well done for sure
You need to login in order to like this post: click here
1 user thanked author for this post.
Mine crashed with pinball X , so have installed pinball Y and it works fine. I`ve also changed the DMD screen to original and not Freezy , and can now put my initials at the end :)
You need to login in order to like this post: click here
1 user thanked author for this post.
I absolutely love this game and want to say thank you so much for all the work. I was looking around to see if anyone has the same problem with DMD as I am where it appears not to be showing the full scores ie: 2nd player.
Use the DMD that’s built into the back glass hit F1 turn off both DMD’s
Make sure you have windows scaling set at 100%You need to login in order to like this post: click here
2 users thanked author for this post.
This Must be my one of my favorite tables! Great Work!!!!
You need to login in order to like this post: click here
1 user thanked author for this post.
Great looking and playing table. I cant imagine the time it would take to make something like this. Thanks for all the hard work you do to you and the rest of the virtual pinball community.
Health is Wealth:Knowledge is Power
You need to login in order to like this post: click here
1 user thanked author for this post.
simply wonderful !
You need to login in order to like this post: click here
1 user thanked author for this post.
Im using your official Rom,But fails to start”cannot find tomjerry” error.rom is in rom folder,game names match script,all permissions match,tried o rename rom and inner files etc.Using vpx 10.6 on win10.Tried Fresh install of table and rom.No luck!
Looks like a great table,i I have 216 tables Had this issue maybe once,Renaming rom fixed last time….Any ideas? any suggestions greatly apreciated,thank you
You need to login in order to like this post: click here
Hey thefuse001. Do you have the latest version of VPINMAME installed?
You need to login in order to like this post: click here
currently running 3.1. thank you for reply
You need to login in order to like this post: click here
Hey thefuse001. T & J will only run with the rom if you have 3.2 or higher. :)
You need to login in order to like this post: click here
1 user thanked author for this post.
This is absolutely gorgeous. I’m new to all of this, but this quickly became my go-to table to show my friends and family.
My only issue with this table is that all of the drop targets for JERRY will not drop. A sound is made so it detects being hit, but the targets don’t drop. I looked through the instruction card and through all 12 pages here, and I don’t see that this is by design, or that anyone else is having issues?
Does anyone have any thoughts around this?
Thanks.
------------------------------------------------------------
Cabinet Build:
- Computer: Intel i7 Processor, 16gb RAM, 512gb SSD, Nvidia 2060 Super
- Monitors: Playfield: 42" Spectre 4K / DMD: 17" Dell Monitor / Backglass: 32" Hitachi 1366x768
- Pinscape for Nudge, LedWIZ for lighting (strobe and flippers only, at the moment)You need to login in order to like this post: click here
I noticed that too but I thought these aren’t droptargets.
This is my kids favorite btw… Thank you for the hard work and sharing it with the community.
You need to login in order to like this post: click here
@liebowa   @dodger1980
There Are 6 drop targets and they work fineYou need to login in order to like this post: click here
Not for me. They register the hit but don’t drop. The Tom targets work fine.
You need to login in order to like this post: click here
Forums are currently locked.
