Currently, there are 0 users and 0 guests visiting this topic.
Viewing 13 posts - 241 through 253 (of 253 total)
  • Author
    Posts
  • #196053
    outhere
    Moderator
    @outhere
    MemberContributorvipModerator



    @liebowa
    @dodger1980

    Are you VP 10.7

    1 user thanked author for this post.
    #196060
    liebowa
    Participant
    @liebowa

    Exact same as Dodger above.  None of the drop targets with the cheese slices work for me; the 5 for Jerry, the one directly across the playfield, nor the one under “Whap, Pow, Bam” on the left hand side.

    I’ve deleted the .nv file, re-downloaded the table etc.

     

    Newbie to Virtual Pinball as of August 2020

    Cabinet Build:
    - Computer: Intel i7 Processor, 16gb RAM, 512gb SSD AMD Radeon R9 380
    - Monitors: Playfield: 42" Vizio 1080P, DMD: 17" Dell, Backglass: 32" Hitachi 1366x768
    - Pinscape for Nudge, LedWIZ for lighting (strobe and flippers only, at the moment)

    #196064
    liebowa
    Participant
    @liebowa

    I’m at 10.6 Final.

    I just found a link to 10.7 BETA.  I’ll install and report back.

    Thank you.

     

    UPDATE.  Downloaded the BETA and copies over the 10.6 install.  Deleted the NVRAM file.  Same results.

     

    Newbie to Virtual Pinball as of August 2020

    Cabinet Build:
    - Computer: Intel i7 Processor, 16gb RAM, 512gb SSD AMD Radeon R9 380
    - Monitors: Playfield: 42" Vizio 1080P, DMD: 17" Dell, Backglass: 32" Hitachi 1366x768
    - Pinscape for Nudge, LedWIZ for lighting (strobe and flippers only, at the moment)

    • This reply was modified 3 months, 1 week ago by liebowa.
    #196065
    outhere
    Moderator
    @outhere
    MemberContributorvipModerator

    Exact same as Dodger above. None of the drop targets with the cheese slices work for me; the 5 for Jerry, the one directly across the playfield, nor the one under “Whap, Pow, Bam” on the left hand side.
    I’ve deleted the .nv file, re-downloaded the table etc.

    What makes you think the cheese slices are drop targets
    “Whap, Pow, Bam” on the left hand side.  —  These are

    #196066
    outhere
    Moderator
    @outhere
    MemberContributorvipModerator

    I’m at 10.6 Final.
    I just found a link to 10.7 BETA. I’ll install and report back.
    Thank you.



    @liebowa

    10.7  is not ready for Prime Time

    #196068
    outhere
    Moderator
    @outhere
    MemberContributorvipModerator

    10.6 Final.



    @liebowa

    Stay on 10.6 Final.

    #196069
    outhere
    Moderator
    @outhere
    MemberContributorvipModerator

    @liebowa
    This is a table you downloaded put in a tables folder and ran it or did you adjust?

    #196070
    liebowa
    Participant
    @liebowa

    Sorry, the targets that the cheese slices “point” to = not the slices themselves.  The letters JERRY, for example.

    The only thing I did was to rotate the board from 270 to 0 for display on my main monitor which is rotated to portrait.  This is the same that I’ve done with the other dozen tables or so that I have downloaded.

    Is there something else that I can delete (registry entries or something) to try to clean up anything that I may have somehow mistakenly broken?

    Thanks for your help.

    Tom & Jerry

    Newbie to Virtual Pinball as of August 2020

    Cabinet Build:
    - Computer: Intel i7 Processor, 16gb RAM, 512gb SSD AMD Radeon R9 380
    - Monitors: Playfield: 42" Vizio 1080P, DMD: 17" Dell, Backglass: 32" Hitachi 1366x768
    - Pinscape for Nudge, LedWIZ for lighting (strobe and flippers only, at the moment)

    #196071
    outhere
    Moderator
    @outhere
    MemberContributorvipModerator

    Sorry, the targets that the cheese slices “point” to = not the slices themselves. The letters JERRY, for example.
    The only thing I did was to rotate the board from 270 to 0 for display on my main monitor which is rotated to portrait. This is the same that I’ve done with the other dozen tables or so that I have downloaded.
    Is there something else that I can delete (registry entries or something) to try to clean up anything that I may have somehow mistakenly broken?
    Thanks for your help.

    The targets with the cheese slice pointing at them are not drop targets but there are 6 drop targets in the game

    #196222
    liebowa
    Participant
    @liebowa

    Well now I feel like a complete idiot, but I’m glad that I know the answer.

    Thank you for helping me out.

    I’ll go hide under my bed now…

    Newbie to Virtual Pinball as of August 2020

    Cabinet Build:
    - Computer: Intel i7 Processor, 16gb RAM, 512gb SSD AMD Radeon R9 380
    - Monitors: Playfield: 42" Vizio 1080P, DMD: 17" Dell, Backglass: 32" Hitachi 1366x768
    - Pinscape for Nudge, LedWIZ for lighting (strobe and flippers only, at the moment)

    #196253
    The Loafer
    Participant
    @theloafer
    Member

    It’s cool, this is how we ALL learned

    1 user thanked author for this post.
    #199658
    stevegooner123
    Participant
    @stevegooner123

    Thanks for this great table ??,a lot of  work & detail has gone into this. I had to use a free online png file shrinker to play this on my modest cab setup & now it plays stutter free with the pup pack too!

    1 user thanked author for this post.
    #200741
    Still Chasing Charlie
    Participant
    @stillchasingcharlie

    Than :yahoo: :yahoo: :yahoo: ks for such an amazing table!!!!

    1 user thanked author for this post.
Viewing 13 posts - 241 through 253 (of 253 total)
  • You must be logged in to reply to this topic.

©2020 VPinBall.com

Log in with your credentials

or    

Forgot your details?

Create Account

The Vpinball app

FREE
VIEW