September 8, 2020 at 11:45 am #200260
Thank you to:
MRCMRC for the vp9 version
Arngrim for the DOF calls
32 assassin for all he taught me
This rare beauty was producted by: Playmatic a Spanish manufacturer of pinball machines, producing 63 different models between 1968 and 1987
Hope you enjoy it and please leave constructive feedback or comments in the support topic and will try to make it better.
All Logos, Copyrights and Trademarks are property of their respective owners.
PROVIDED STRICTLY FOR PERSONAL / HOME USE AND NOT FOR COMMERCIAL SALE / RE-SALE OR DISTRIBUTION!
Permission to Mod: Yes with approval
You need to login in order to like this post: click hereSeptember 8, 2020 at 11:56 am #200265marieParticipant@marieSeptember 8, 2020 at 11:59 am #200267BendoParticipant@bendoSeptember 8, 2020 at 1:36 pm #200282PinboltParticipant@pinboltSeptember 8, 2020 at 2:00 pm #200285AdolfoParticipant@scorpion
Hello, thanks for the table, very good as always, but the backglass do not start…
You need to login in order to like this post: click hereSeptember 8, 2020 at 3:26 pm #200287Friffy1Participant@friffy1September 8, 2020 at 4:44 pm #200303ThalamusModerator@thalamusSeptember 8, 2020 at 7:40 pm #200332Otto1970Participant@otto
Are switches 25, 26 and 27 working for you?
You need to login in order to like this post: click hereSeptember 9, 2020 at 4:12 am #200361AdolfoParticipant@scorpion
problem solved, thanks
You need to login in order to like this post: click hereSeptember 9, 2020 at 11:16 am #200371johnbymyParticipant@johnbymy
Super mais la bille sort parfois du terrain et ne reviens plus et il faut relancer la table
You need to login in order to like this post: click hereSeptember 9, 2020 at 3:06 pm #200382
sw 25, sw26, sw27 are Stand Up targets and everything works here, points are registered correctly.
You need to login in order to like this post: click hereSeptember 13, 2020 at 11:25 am #200859JediWizardParticipant@jediwizardSeptember 14, 2020 at 8:48 am #200992Bob AlbrightParticipant@bobalbright
Thanks. I like this table, but I am getting an error every time I play—does not happen right away, but it’s the same error every time.
Script error Line 1 Wrong number of arguments or invalid property assignment “Sound FX”
"And in the end, the love you take is equal to the love you make"
You need to login in order to like this post: click hereSeptember 14, 2020 at 9:20 am #200994
are you using any 10.7 beta version of visual pinball??
Table will work properly only in 10.6 final.
No issue(s) reported or found so far.
You need to login in order to like this post: click hereOctober 16, 2020 at 11:37 am #205156VATMANParticipant@vatman
Good job Goldchicco, it’s one of my favorites.
Thank you very much for your conversions to VPX.
However, the corridor switches, the center right and left aisles and the bottom 4 corridors do not work on the table, and the upper right hole does not turn on the letter C. Please, you can check it out. Thank you. Best regards
You need to login in order to like this post: click here
- You must be logged in to reply to this topic.