- This topic has 3 replies, 2 voices, and was last updated 6 years ago by
.
-
Posts
-
This PuP-Pack can ONLY be used with this specific Tron Legacy table:
Tron Legacy (Stern 2011) (PUP-Pack Edition 1.5) (SSF, Lightmod 1.2)
It can be found here:
Tron Legacy (Stern 2011) (PUP-Pack Edition 1.5) (SSF, Lightmod 1.2)
This table update is specifically made to take advantage of PinUP Player’s new PuPCapture feature that can trigger videos based on real-time monitoring of the table’s DMD images. As a result I was able to add alot more videos for more modes than I could before (such as End of Line MB, and Sea of Simulation) A brief video demo of the table can be seen in this video towards the end at about 8:26.
Requirements:
You MUST have DMDext 1.6 installed, and then PinUP Player 1.20+ installed in order to use the required PuPCapture function that this table uses.
For PuPCapture to work correctly this PuP-Pack, you will need to have your DMD colour for this table (in VPinMAME) set to:
Red: 77
Green: 125
Blue: 255
Tron Legacy (Stern) PinUp Player Pack (BackGlass and Topper)
System:Â Â Visual Pinball Player (version 10.4+)
PuP-Pack:Â All Video, Media and Artwork by TerryRed PuP-Pack Editor & PuPCapture files by TerryRed
Installation:
Ensure there are no files in your PUPVideostrn_174h folder (if that folder already exists).
Copy the PuP-Pack (trn_174h) folder into your PUPVideos folder.
(example: C:Visual PinballTablesPinUpPlayerPUPVideostrn_174h).
Background Videos:
Backglass: Â Enabled by default
Topper   :  Enabled by default
(note background settings are configurable by using PinUPPackEditor.exe)
Installation Notes:
The Backglass has a default setting to enable a looping Background Backglass video.  You can remove your existing Tron Legacy.directb2s file as it is not needed. (and won’t be seen while using this PuP-Pack)
The Topper has a default setting to enable a looping Background Topper Video. Â If you are using your own Topper Video (through Pinball X) you should either disable the Topper Background video (using PinUPPackEditor), or replace it with your own video.
This PuP-Pack is designed for people with Backglass and Toppers.
If you do not have a Topper screen, you do not need to use the PuP Topper if you don’t want to. You can disable this just for this table only by using the PinUPPackEditor.
You need to login in order to like this post: click here
Is the color setting for the 100% variable or is it for the 66 and 33 settings to?
You need to login in order to like this post: click here
Is the color setting for the 100% variable or is it for the 66 and 33 settings to?
For all….just good old blue.
You need to login in order to like this post: click here
This PuP-Pack may not work correctly with the new PinUP System, as it needs to be updated.
There will be an updated version when time permits.
You need to login in order to like this post: click here
Forums are currently locked.
