VR ROOM Haunted House (Gottlieb 1982) minimal

[psiomicron]

https://vpinball.com/VPBdownloads/vr-room-haunted-house-gottlieb-1982-minimal/

VPX Table by: cyberpez

Uses 2 sets of flippers so configure as needed.

Adjusted Lighting.

Added Monster bonus LEDs on playfield for 6 digit rom.

Updated VR cab to resemble the real one.

Suggest using the 6 digit LED rom, 7 digits will work but monster bonus LED’s won’t activate.

You need to login in order to like this post: click here

15 users thanked author for this post.

fGv33CY32SMh, Jesperpark, skunkworx, wuffzack, FlippingSweet, TrackMaD, Rajo Joey, fings1, gear323, dartg, takut, pinballroo, HunterST, freetz, KrakenByte

[Darquayle]

One of my favorite tables and I was lucky enough to get to work on a directb2s backglass for it a number of years ago.  Have always liked it since then.  Very nice VR implementation.   I do have one issue that I’m hoping you know the answer to… The table always sits higher in the VR Room than my other tables.  I end up bumping the table down with the “Table Down” button but that then saves the value globally which then means I have to bump it back up again when I play one of my other tables.  Do you have this same experience and do you know a way around it?  My guess is that it is affected by the lower playfield?  Or the fact that is has a lower, normal, and upper playfield.

Any suggestions are appreciated.

Again, GREAT JOB!

You need to login in order to like this post: click here

[Wrath2000]

Awesome table but so brutal, one of the hardest tables I’ve played so far. Thanks.

You need to login in order to like this post: click here

[psiomicron]

@darquayle Updated the table height, so should not have to adjust every time now.

You need to login in order to like this post: click here

[Rajo Joey]

Thanks for the update.

You need to login in order to like this post: click here

[Spitfire]

ball gets stuck in a few spots on lower playfield with newest 1.2 update

You need to login in order to like this post: click here

[Rajo Joey]

Spitfire wrote:

ball gets stuck in a few spots on lower playfield with newest 1.2 update

Yes, for me also.

I also shoot up through the middle of the lower playfield and the ball must be stuck somewhere.
But I don’t find the ball. I take a look in VR, but it couldn’t be found.

So at the moment it isn’t playable.

• This reply was modified 3 years ago by Rajo Joey.
• This reply was modified 3 years ago by Rajo Joey.

You need to login in order to like this post: click here

[Author]

Posts