Williams Phoenix / Bally Supersonic

[PaSSion]

just an update. had one of my hd’s died lost everything :(  I am still looking around for a decent playfield image.

You need to login in order to like this post: click here

[Schreibi34]

Would this help?

You need to login in order to like this post: click here

1 user thanked author for this post.

PaSSion

[Schreibi34]

If you need them i can send you the original .png’s!

You need to login in order to like this post: click here

[shiva]

Had a look in the old shivaSite archives, plus my own collection. Found a few in there that looks usable, a decent photoshop artist should be able to straighten and fix quite easily. Some of the images are very clear, only one is 2048 height and straight but looks like it’s good enough for a redraw. If you want them all just pm. I will find a place and send a link, just give you everything I have for Phoenix. About 65 megs with manual etc. This looks to be the best one I have though

Try and get them to you, but on vacation right now.  :)

_____________________________________

Latest projects and rants at My Facebook Page
_____________________________________
Latest Project: fpxEngine Table Builder

Attachments:

1. phoenix_5055.zip

You need to login in order to like this post: click here

[Mlager8]

If you upload the rest I will take a stab at it. The attached image looks pretty solid for sure though

You need to login in order to like this post: click here

1 user thanked author for this post.

PaSSion

[PaSSion]

looking great thanks Schreibi34, Shiva and Mlager8. after looking at my cold storage HD’s i found my backup 

You need to login in order to like this post: click here

[shiva]

It’s actually the best I have. The other larger images are at a angle so the top would be very distorted. These have to be about 18 years old, but I removed a few really bad ones and have enclosed a zip of the stripped pf section. I see better plastics than I have already up here. With all the resources here, you should be able to build a decent table now.

_____________________________________

Latest projects and rants at My Facebook Page
_____________________________________
Latest Project: fpxEngine Table Builder

Attachments:

1. stripped_pf.zip

You need to login in order to like this post: click here

3 users thanked author for this post.

Thalamus, PaSSion, bord

[Mlager8]

OK I’ll check it out tomorrow, only need peices to patch over the gloss parts anyway. I can try to undistort in ps also. Thanks for the assets.

You need to login in order to like this post: click here

[Schreibi34]

One or two plastics are still missing!

You need to login in order to like this post: click here

[PaSSion]

Awesome Shiva that’s great thank you. let me know if i can help Mlager8, Im’ not much when it comes to PS or doing graphics.

here’s what i have so far, thanks guys.

You need to login in order to like this post: click here

[PaSSion]

here’s what i’ve done so far

You need to login in order to like this post: click here

[Schreibi34]

Found a few more today. Not really sure if they help, but the more the better:

 

You need to login in order to like this post: click here

1 user thanked author for this post.

PaSSion

[Schreibi34]

@PaSSion:

I’ll send you the originals tonight. Just in case they went through a filter here on this site!

You need to login in order to like this post: click here

1 user thanked author for this post.

PaSSion

[Mlager8]

Does anyone have an accurate blueprint table layout? I pulled one from the manual at ipdb.org but when I try and lay out the image I perspective corrected over the schematic it’s not lining up by a long shot. I can make the top fit, of the bottom fit, but if I stretch it across the whole schematic there’s no way it fits, making me think the schematic I pulled is not accurate. See below

You need to login in order to like this post: click here

[Schreibi34]

Here are the zipped images:

https://1drv.ms/u/s!AtQwS7kKT0THg9Y9_tXQdQ2x4YwHsw?e=id9weP

https://1drv.ms/u/s!AtQwS7kKT0THg9Y8yvo1jVt_BipqvQ?e=9gjjg6

The 2nd zip-file includes the manual. Maybe the schematic in there is better?

You need to login in order to like this post: click here

1 user thanked author for this post.

PaSSion

[shiva]

The manual pictures of the artwork are never accurate. They are just drawings for operator  use and shouldn’t be considered for actual use as they can be quite off. It’s best to use your pf image, and then overlay a faded image of the manual so you know where the rough locations of all the parts should go, and then build it from there using the cutouts and holes drilled in the pf image as the true guide.

_____________________________________

Latest projects and rants at My Facebook Page
_____________________________________
Latest Project: fpxEngine Table Builder

You need to login in order to like this post: click here

[Mlager8]

The problem is I have no reference for real dimensions, the one good image has a good deal of camera distortion so I don’t have any from of reference to undistort the playfield properly.

You need to login in order to like this post: click here

[PaSSion]

Mlager8 here is a link to some files for you to have a look at, if you need any more let me know.

https://drive.google.com/drive/folders/0B9uNIBWsuXdNUTVkMkpnU2g3R0E

Cheers

You need to login in order to like this post: click here

[PaSSion]

thanks Schreibi34  will check them out

You need to login in order to like this post: click here

[PaSSion]

 Mlager8 here is a Blueprint for you, This is what i used for the build.

 

You need to login in order to like this post: click here

[Author]

Posts