- This topic has 59 replies, 5 voices, and was last updated 4 years, 2 months ago by
.
-
Posts
-
This should help with the layout. Just stretch it to the propper table aspect ratio (PF size):
More plastics but no luck with the missing ones:
You need to login in order to like this post: click here
One more:
The last one would be the big long one along the left sidewall. That one should be doable from the plastic collection pic. It’s about a 1000 pix in length.
You need to login in order to like this post: click here
1 user thanked author for this post.
Thanks Schreibi34. I have updated my google drive with all the images you have supplied and from Shiva as well as other images i have found on the net. Thanks manÂ
I will also upload the table i have done, missing Coding, bumper cap images and maybe lighting.
I’m not too good with the graphics department, tried with Gimp….
https://drive.google.com/drive/folders/0B9uNIBWsuXdNUTVkMkpnU2g3R0E
You need to login in order to like this post: click here
IT LIVES!
You need to login in order to like this post: click here
You can steal the bumper cap from my Hot Tip mod! But you need a new UV map! If you send me the BC images i can do this for you!
You need to login in order to like this post: click here
1 user thanked author for this post.
Doing great work @schreibi34 – thank you !
You need to login in order to like this post: click here
1 user thanked author for this post.
There are a people here who have done alot more!
You need to login in order to like this post: click here
You know what. Everyone, except the one that has done most could reply with the exact same sentence.
Would love to know who that actually would be though.
All I do know is that – there is a load of great guys in our community. You’re one of them.
You need to login in order to like this post: click here
1 user thanked author for this post.
Hey PaSSion, do you think I can get access to that drive folder? I’d like to take a look and see what I could do.
Mlager8@gmail.comYou need to login in order to like this post: click here
@PaSSion
Bumper Cap .obj is in the ZIP-File!
You need to login in order to like this post: click here
1 user thanked author for this post.
Not sure if you guys need any more help with backglass or pf but i have both taken apart and stored in my attic Both i can bring down if needed and see what i can do to help out. I would love to have a vpx version of the one i took my legs and coin box and other misc items from.
You need to login in order to like this post: click here
1 user thanked author for this post.
Any help would be nicely appreciated Sanchez77 thanks
You need to login in order to like this post: click here
So finally got around to looking at this and did an initial stitch. This is about 5 images warped into perspective and patched together. Also did some AI upressing for some more resolution. This is super cursory and not refined at all, but it’s going to be really hard to complete without a nice clear shot of the middle upper playfield, ideally without the pop bumper mechanism. Looked all over pinside and google but to no avail. If anyone has some clearer shots of the formentioned sections it would really help.
You need to login in order to like this post: click here
Mlager8 I have uploaded the pics from Shiva on that Google drive i gave access to. cheers
You need to login in order to like this post: click here
Mlager8 I have uploaded the pics from Shiva on that Google drive i gave access to. cheers
I know I used shiva’s pics to make what I have. Unfortunately the pics that contain clear shots up the upper portion are relatively low resolution/blurred. If that’s the best that can be found I will use them, but slightly sharper/bigger images would do world better
You need to login in order to like this post: click here
Waiting anxiously to play again with that board that plays as a child and the current version is not clear and does not play well
You need to login in order to like this post: click here
I own a very well-preserved Phoenix and would love to help get the ball rolling on this project.
Unfortunately I moved overseas and it’s currently 2000 miles away in my good friend’s basement arcade. However, he’s great with electronics and has a nice camera too- it’s a safe presumption that he’d be happy to help so please let me know if there’s anything I can do. The Phoenix must rise from the ashes!
You need to login in order to like this post: click here
This any help?
https://pinside.com/pinball/forum/topic/plastics-for-phoenixYou need to login in order to like this post: click here
1 user thanked author for this post.
Ok i got busy and completely forgot about pulling the playfield down from the attic. Its complete and i think in good condition. I also have the backglass seperated. What close up pics would still be helpful or needed. My S20 Ultra should pull some pretty good pics of whatever close ups you need.
You need to login in order to like this post: click here
Hey Sanchez any pictures that you can take will help a lot cheers
You need to login in order to like this post: click here
Forums are currently locked.
