Currently, there are 0 users and 0 guests visiting this topic.
Viewing 12 posts - 1 through 12 (of 12 total)
  • Author
    Posts
  • #130781
    Onevox
    Participant
    @rooster
    Member

    This is an FYI in case someone else is working on, or planning to work on, an update to JP’s Flash. The physics and game play on this are spot on, compared to the actual game.

    A couldn’t find good PF images or scans, so I’m redrawing and correcting JP’s PF using my real Flash as a guide (my PF isn’t in great shape). Hope to add Vogliadicane’s vintage lighting, used on Fathom.

    Plus other enhancements.

    Pete

    Some of the early work compared to original.

    new detail 3new detail 2new detail 1

     

    old detail 3old detail 2old detail 1

    Onevox

     

    #130803
    bord
    Moderator
    @bord
    MembervipContributorModerator

    Great news. Looking forward to watching the progress here.

    #130805
    randr
    Keymaster
    @randr
    ModeratorMember

    .you could always scan your pf and just use it as a worn image ??

    ********************************************************
    Messing with the VPinball app and push notifications.
    So if you haven't downloaded app yet what are you waiting for!?
    for IOS and Android

    ********************************************************

    #130836
    Onevox
    Participant
    @rooster
    Member

    I guess I could. Sure would be nice to play Flash without looking at my sad little PF.

    worn pf

    Onevox

     

    #130837
    randr
    Keymaster
    @randr
    ModeratorMember

    You know it’s rough for sure but would be a great table like that… at least as an option? I know I would probably use it??

    ********************************************************
    Messing with the VPinball app and push notifications.
    So if you haven't downloaded app yet what are you waiting for!?
    for IOS and Android

    ********************************************************

    #130838
    bord
    Moderator
    @bord
    MembervipContributorModerator

    I like the idea of scanning it for the accuracy. Would be great to even just have the beat playfield as a guide for correct element placement.

     

    DO IT! :yahoo:

    #130851
    Thalamus
    Moderator
    @thalamus
    ContributorMemberModerator

    Accuracy beats beauty every time. B-) – ok, admit, there is a limit :whistle:

    #130889
    Onevox
    Participant
    @rooster
    Member

    Purists! :D. I guess y’all will want me to get djrobx to recreate the wonky effect of cupped inserts, too!

    hmmm, stripping the Playfield. Again. This would be a good time while I troubleshoot my non-booting MPU.

    Onevox

     

    #130895
    BorgDog
    Participant
    @borgdog
    MemberContributorvip

    Purists! :D. I guess y’all will want me to get djrobx to recreate the wonky effect of cupped inserts, too!

    hmmm, stripping the Playfield. Again. This would be a good time while I troubleshoot my non-booting MPU.

    hmm, may have to play around with cupped inserts, I know they say to just use a flat mesh for the playfield but it does work with non flat elements.  might throw in a raised edge on one as well bu that would be too easy.  the vulcan i used to own had all the bonus inserts in front of the flippers severely cupped, ball did some weird stuff. still regret not stripping down and scanning it before I sold it.

    #130896
    bord
    Moderator
    @bord
    MembervipContributorModerator

    Yeah, check out the PF mesh on Hot Hand. All the holes around the spinning flipper are just part of the PF mesh. Cupped inserts are definitely possible with a PF mesh. Would be really cool.

    #130899
    BorgDog
    Participant
    @borgdog
    MemberContributorvip

    ah, yeah forgot about that one.  I was just thinking of just poking holes in the playfield mesh then I could put flat and cupped primitives under each hole and every time you start the table it randomly makes some of them cupped by switching collideable on and off, or even multiple cupped for varying level of cuppedness.

    #141891
    Onevox
    Participant
    @rooster
    Member

    I got excited because I found a guy selling a pretty good PF and I figured I’d replace my worn one, so I bought it. But apparently during the process of stripping all the rusty parts, the plywood cracked, so he refunded my money. I’ve asked him about scanning or taking a grid of photos that I can stitch together. So I’m waiting…

    Onevox

     

Viewing 12 posts - 1 through 12 (of 12 total)
  • You must be logged in to reply to this topic.

©2020 VPinBall.com

Log in with your credentials

or    

Forgot your details?

Create Account

The Vpinball app

FREE
VIEW