Wizard of Oz VR Room Mod

[drhotwing1]

https://vpinball.com/VPBdownloads/vr-room-wizard-of-oz/

This is a mod to enjoy WoZ in a VR room. The actual table was not changed or modified. All credits for the table should go to the table author.

This build is meant to be played with VPVR only

Read the readme in the package for install instructions

You need to login in order to like this post: click here

9 users thanked author for this post.

Bergkiwi, Rajo Joey, Marcio, xenonph, fings1, Jesperpark, Affable, Vox Blackheart, satbranigan

[drhotwing1]

You should change the number under ‘VR far plane’ to 700 when playing this VR table. This will make the viewable area bigger and will prevent clipping while looking around.

You need to login in order to like this post: click here

[Bluerider221]

I’m getting a Controller error on line 10228 – Controller.B2sSetdata.

Disable B2s is unchecked in VP settings.

You need to login in order to like this post: click here

[OlDirty]

Same problem here with the Controller error on line 10228

You need to login in order to like this post: click here

[bb]

Any fix? I’m also getting this error

You need to login in order to like this post: click here

[italianbeef]

Same here. :(

You need to login in order to like this post: click here

[senseless]

Make sure for this table specific that you enble b2s under preferences/Keys, Nudge and DOF. Otherwise you will get the Controller error!

Make sure you enable CAPTURE EXTERNAL DMD under Preferences/Configure Keys, Nudge and DOF settings. This tables uses UltraDMD!

Tip: load VPVR without the CAPTURE EXTERNAL DMD option, then load the table, play it, then exit it and check the external option, and hit play again. Works every times, without crash, but you have to uncheck it again when you exit VPVR.

You need to login in order to like this post: click here

[bb]

thanks but B2S is unchecked and still controller issue.

You need to login in order to like this post: click here

[italianbeef]

I was seeing this error but had forgotton to register the b2s backglass server. Once I did that, everything started working.

You need to login in order to like this post: click here

[Swamp7hing]

Still getting the controller errors but I’m registered to the backglass server and I followed all of the steps as flagged above (capture dmd on/off, enabled B2S, etc). Does anyone know how to fix this? Weirdly enough the controller issue doesn’t seem to be present if I launch the table flat.

EDIT: Managed to fix it by running the table in the 32 bit version of the software. Is there a way to enable B2s just for this table specifically upon launch?

You need to login in order to like this post: click here

[toonron]

I have unchecked “disable B2S” and so the table now works for me… however I still can only see the UltraDMD separately on my screen and not in the VR display even though I have checked the box for “Capture External DMD”

 

Please help as I would love to get the full experience!

 

-Ron

You need to login in order to like this post: click here

[Warrie]

The DMD appears in VR, but I have a static background picture. On my monitor I do see the backglass with 4 different pictures and animations. Anybody know how I can get this to appear in VR?

You need to login in order to like this post: click here

[jas722]

I tried all the tips in this thread and still getting Controller error on line 10228 – Controller.B2sSetdata.

Unchecked B2S in the Keys,Nudge and DOF options

Tried the 64 and 32 bit version of VPX VR

Registered the B2SBlackGlass server

 

Any help?

You need to login in order to like this post: click here

[Warrie]

right click on the backglass with your mouse, it opens the b2s options. Check user external dmd and uncheck ‘show errors’.
Then it worked for me :)

You need to login in order to like this post: click here

[Author]

Posts