This topic contains 47 replies, has 27 voices, and was last updated by  Manolo / ICE 2 weeks, 5 days ago.

Viewing 20 posts - 1 through 20 (of 48 total)
  • Author
    Posts
  • #56496
     32assassin 
    Participant
    Member

    this is a VP9 to VPX conversion.

    VP9 table by freneticamnesic

    I copied and pasted each component into a VPX template and updated what i could with componets found on VPX.

    Undertaker toy and apron primitives by Dark.

    the decal on the apron can be changed

    Apron Decal.png = Stock decal

    Apron Decal 1.png = Royal Randar Pinball

    or you can hide it to show the Data East logo.

     

    Note that this table will give you an error at load time.

     playfield high power disabled by coin door interlock

    this is a PINMAME error,  their is no code modifications I can do to fix this.

    Total of 26 users thanked author for this post. Here are last 20 listed.
    #56498
     randr 
    Keymaster
    ModeratorMember

    Thanks again 32!

    ********************************************************
    Messing with the VPinball app and push notifications.
    So if you haven't downloaded app yet what are you waiting for!?
    *******************************************************

    #56500
     TNT2 
    Participant
    Member

    Thanks Assassin!

    #56523
     STAT 
    Participant
    MemberContributor

    This Table and HFs Backglass :yahoo:
    Thanks 32assassin :good:

    #56524
     STAT 
    Participant
    MemberContributor

    The upper Flippers have too much Rubber Heights,. down to 15, and the Flippers are in “White Color”

    #56546
     HauntFreaks 
    Moderator
    vipContributorMember

    32assassin
    I
    ‘ve wanted to make a ramp for something… so I made a new 3d model for the center ramp if you want it I will send it to you… of post it here if you want….
    test-1

    Attachments:
    #56549
     Noslet 
    Participant
    MemberContributor

    I like it like it is, thanks 32assassin  :good:

    Ah

    #56553
     senseless 
    Participant
    Member

    Thanks for this great VPX version. Will be doing some wrestling tonight :).

    #56604
     Wolfanoz 
    Participant

    Assassin… thanks for this soooo much.  I almost had one of the real deal of these and it fell through my fingers.  Next best thing!  :good:

    #56630
     Jodannar 
    Participant
    Member

    I haven’t downloaded this yet to play, haven’t been at the cabinet. I notice that you have a centre post set up; production machines didn’t have a centre post. maybe you have this as a flash to disable in the code?

    #56635
     STAT 
    Participant
    MemberContributor

    Quick Way:
    Select or Click on “Primitive30” (all between the Flippers) and un-check “Visible” in the Options Window
    Then Click on the Rubber Ring and un-ckeck “Visible” and “Colidable”
    Save Table … Play.

    #56689
     Scotty VH 
    Moderator
    ModeratorMember

    For some reason, I get an error that reads  “playfield high power disabled by coin door interlock”  Any ideas what is causing this?

    JUST KIDDING!  I saw this in your release notes, and just had to ask an annoying question!  Great work, 32A!!   B-)

    #56690
     randr 
    Keymaster
    ModeratorMember

    Lmao!!!!!

    love it Scotty vh

    ********************************************************
    Messing with the VPinball app and push notifications.
    So if you haven't downloaded app yet what are you waiting for!?
    *******************************************************

    #57875
     Andypc 
    Participant
    Member

    The gap between the flipper seems bigger than on the VP9 physmod version. Not sure which is right, but needless to say I do better on the other version. :wacko:

    Awesome update though :good:

    #69894
     NetzZwerg 
    Participant

    Thank you for sharing this table! I have a problem with the flippers, they get stuck in up-position, have big lags or even don´t react at all. All other VPX tables I have are working fine for me, so I am wondering if there is a way to fix this issue. Due to another post I found I have tried with and without db2s, but this doesn´t make any difference…

    #69896
     Thalamus 
    Moderator
    ContributorMemberModerator

    Try this

    Reset a table to default

    1 user thanked author for this post.
    #69899
     NetzZwerg 
    Participant

    Wow, thanks for the fast and helpful reply! This did the job, everything´s fine now! :good:

    Regards

    #70387
     SPAMP 
    Participant

    This table will not operate for me. The balls get stuck in the launch ramp (if they even come out at all). The original table plays in VP9 but I can’t get the B2S back glass to work with either table.

     

    #70389
     SPAMP 
    Participant

    I could only get the (Noah Fentz-Destruk) version of RR going and it looks like that is only a one screen version so it won’t work on my cab.

    #106144
     STAT 
    Participant
    MemberContributor

    32assassin, i noticed, when the Ball Comes down in the left Wire Ramp, then the Ball goes mostly to the left Outlane … and not in the Inline as it should be :unsure:

    btw. Color VNI/PAL here: http://vpuniverse.com/forums/topic/3510-royal-rumble-wip/?page=3&tab=comments#comment-40335

     

Viewing 20 posts - 1 through 20 (of 48 total)

You must be logged in to reply to this topic.

©2019 VPinBall.com

WP2Social Auto Publish Powered By : XYZScripts.com
Vpinball.com

Log in with your credentials

or    

Forgot your details?

Create Account