Forum Replies Created
-
Posts
-
Well that was fast! :D Was so happy to see it was already done. Thanks Randr, you’re a star
You need to login in order to like this post: click here
On mobile it’s unnecessary difficult to see sitewide activity (which at least is the thing I usually first check) on the site.
First you have to tap Recent Activity. Then select entire site and then Sitewide activity. There is one level too much in navigation, in my opinion at least :| Since there is only one node under Entire site there is no need for sublevel navigation?
Same thing with Forum activity.
You need to login in order to like this post: click here
Another thing, personally I find it funny that people build and sink hundreds/thousands of dollars into building a nice cabinet, but they can’t help support the people that make these communities.
I’m more than happy to give couple bucks for the people who maintains the sites and would gladly buy a beer to table author for a new table. But the thing is that I want to do it on my terms and not because it’s mandatory. If there would be a donate button here at vpinball.com I would definitely chip in 10 or 20$ a year. So what I’m trying to say is that when you give people a choice to show their support instead of forcing it it might come more easily :)
EDIT
OK, I only read the first page before commenting and didn’t know there already was some changes on this – good stuff. But still, I would rather make anonymous donation instead of buying a fixed amount for a badge.
You need to login in order to like this post: click here
Nice Randr! Previously the main content area was too small and hard to read when browser was not full width. Now it’s much better
You need to login in order to like this post: click here
Sweet! We are replacing our old Stargate with LOTR at my workplace before xmas. Now I can learn the rules beforehand and humiliate my coworkers. Thanks Coindropper!
You need to login in order to like this post: click here
Thanks @Blashyrk
You need to login in order to like this post: click here
Really cool!
What angle you have installed your display panel? I’ve started my first build (http://1drv.ms/1lhX2WJ) and I really don’t know should I place it straight or few degrees angle :|You need to login in order to like this post: click here
Last!
You need to login in order to like this post: click here
Brewdogs Nanny State is my favorite – but it is quite hoppy.
You need to login in order to like this post: click here
I’m running Windows 10 64-bit. I haven’t had performance issues with other tables so far.
Even when the game stutters on multiball – fps never drop below 48fps. So basically it _should_ be playable but in reality it skips so many frames that it really isn’t.
Thanks for answering Randy
You need to login in order to like this post: click here
Apparently my setup is not powerfull enough to run this table fully :( It runs smooth ~170fps normally, but in multiball modes (with three or four balls) it’s totally unplayable :(
Is there anything I could try to do to make it playable? Or do I have to change the processor (AMD Athlon X2 215) to something more powerfull? I just changed new graphics card (GTX 750Ti) onto it and I think that it should not be the problem.
You need to login in order to like this post: click here
Finally back home. Apperantly I have AMD Athlon x4 635 with 6gb of memory (I told my friends I’ll build a pinball cabinet, send me your old computers – and this is what i got).
I will try to tweak those 3d settings and see how that affects. Thanks guys
Edit:
Ok, I tweaked some settings and now it’s much much better. FPS was quite steadily somewhere over 100. I noticed that when I play for example Star Trek it first skip a lot of frames but slowly “warms up”. Probably it loads something and then caches it and then it just works.You need to login in order to like this post: click here
Thanks for answering. Your system actually sounds pretty much the same that I have. I will check more exact details when I get home from work and do some comparison. I bought GTX 750 Ti so that should not be the problem. Hopefully it is not the windows 10 either since I don’t want to reinstall everything again so hopefully by tweaking the settings of graphics card does the trick. Thanks again dude
You need to login in order to like this post: click here
With what kind of hardware you’re running VPX? I had to buy new graphics card yesterday to be able to play anything on VPX. Now it runs quite ok but on multiballs and such it still stutters a lot. So maybe I’ve to get new processor too? :) Or it just could be because I’m running Windows 10 :|
You need to login in order to like this post: click here
I dont understand why is there so few downloads??! All of these tables are amazingly well done. Many thanks to the authors. Is there a way to donate beer as a thank you?
You need to login in order to like this post: click here
Hi guys,
I kind of got it to work, but not fully. Game starts and it’s working but there is this weird brown layer floating in the middle of it all and I can only see the top part of balls :| The only good thing in this is that I can really see balls bouncing up on the table sometimes so the V10 physics is quite amazing :)
http://1drv.ms/1LGQvjm (Sorry for bad image quality – had to take it with my mobile phone)
Also I’m missing the DMD fully :| (edit: got it working by editing the script)
You need to login in order to like this post: click here
