• Don't forget to rate 1-5 stars! Check the support tab for any help or comments.

  • Don't forget to "THANK" or "LIKE" the Author's 1st post in support topic.

  • (37)
    « »
  • Download Info

    Thumb
  • America's Most Haunted for VP10 beta, built using Shoopity's script conversion. This table requires UltraDMD to function completely since there is no ROM. See Installation for a guide on how to install.

     

    All the scripting and conversion of this table to VP in the first place was done by Shoopity, it's really fine work and without him this would just be a dream.

    Thanks to UltraPeepi for the fantastic UltraDMD program!

    Thanks to arngrim for DOF scripting!

    Thanks to Knorr for the new feedback sounds!

    Thanks to my table testers!

    Thanks to the VP devs who have put so much work into the VPX Beta so far!

    Of course thanks to Ben Heckendorn for creating the real table this recreation pays homage to!

     

    NOTE: This guide presumes that you have Microsoft .NET Framework 2.0 installed in advance, if not, get it here: http://www.microsoft.com/en-us/download/details.aspx?id=16614

     

    1. Download the .vpx table and place in your Visual PinballTables folder

    2. Download the GIF pack and place the folder in your Visual PinballTables folder (dir should remain named America's Most Haunted.UltraDMD)

    3. Download the Music pack and extract it to Visual PinballMusic

    4. Download XDMD beta 0.2 from XDMD.info/download, unpack to C: or anywhere you're comfortable (for this example I'm placing the XDMD install directly at the C: level)

    5. Download XDMD beta 0.3 preview from XDMD.info/download and replace the XDMD.dll in C:XDMDXDMD DemobinRelease with this one

     

    >>> MAKE SURE YOU UNBLOCK ALL FILES IN THE C:XDMDXDMD DemobinRelease FOLDER

     

    6. Download the latest UltraDMD from ultradmd.wordpress.com/download/ - currently 1.1.150215, and unpack this to C:XDMDXDMD DemobinRelease

     

    7. Now you need to register UltraDMD, you can do this potentially two ways. The easiest way, if it works, is to open a command prompt in ADMINISTRATOR mode and navigate to the C:XDMDXDMD DemobinRelease folder, type "UltraDMD.exe /i" (without quotes) and press enter. It should register and give you confirmation. If this doesn't work, you need to open a command prompt window in ADMINISTRATOR mode and navigate to C:XDMDXDMD DemobinRelease and then paste this into the command window:

     

    C:WINDOWSMicrosoft.NETFrameworkv2.0.50727RegASM UltraDMD.exe

     

    this will confirm that the EXE is registered! You should be good to go now!

     

    ***The following is not necessary to play, but may be helpful for those who want more:

     

    If you wish to use the included B2S, navigate to your Visual PinballUser folder and create a Text document, name it LMEMDOFTables.txt

     

    In this file place a single number:

    0 - No controller (no b2s, technically not needed)

    1 - B2S - this will be most common

    2 - B2S with mechanical sounds disabled! This is for those buggers with all the fancy contactors and solenoids and strobes and such. You know who you are!

     

    Just make sure you place the included .directb2s file in the same folder as the .vpx table!

    Sorry, it's just a static B2S for now!

     

    All the scripting and conversion of this table to VP in the first place was done by Shoopity, it's really fine work and without him this would just be a dream.

    Thanks to UltraPeepi for the fantastic UltraDMD program!

    Thanks to arngrim for DOF scripting!

    Thanks to Knorr for the new feedback sounds!

    Thanks to my table testers!

    Thanks to the VP devs who have put so much work into the VPX Beta so far!

    Of course thanks to Ben Heckendorn for creating the real table this recreation pays homage to!

     

    Fixed (?) outlane issue

    Fixed gameover issue

    Fixed ball rolling sounds

    Fixed material issues on kickers

    Adjusted bumper force and x scale of table

    Currently, there are 0 users and 0 guests visiting this topic.
    Viewing 20 posts - 1 through 20 (of 149 total)
    • Author
      Posts
    • #16540
      freneticamnesic
      Moderator
      @freneticamnesic
      vipModeratorMember

      America's Most Haunted for VP10 beta, built using Shoopity's script conversion. This table requires UltraDMD to function completely since there is no ROM. See Installation for a guide on how to install.

       

      All the scripting and conversion of this table to VP in the first place was done by Shoopity, it's really fine work and without him this would just be a dream.

      Thanks to UltraPeepi for the fantastic UltraDMD program!

      Thanks to arngrim for DOF scripting!

      Thanks to Knorr for the new feedback sounds!

      Thanks to my table testers!

      Thanks to the VP devs who have put so much work into the VPX Beta so far!

      Of course thanks to Ben Heckendorn for creating the real table this recreation pays homage to!

       

      Total of 22 users thanked author for this post. Here are last 20 listed.
      #16541
      randr
      Keymaster
      @randr
      ModeratorMember

      Looks great! thanks fren

      0

      ********************************************************
      Messing with the VPinball app and push notifications.
      So if you haven't downloaded app yet what are you waiting for!?
      for IOS and Android

      ********************************************************

      #16542
      really
      Participant
      @st3rn

      I get this script error line in VP9 and VPX for America’s Most Haunted, any ideas? I want to play this table and it’s the only one that I can’t figure out.

      on line 520
      SaveValue ”AMH”, ”Solenoids”, AMHOptionsSol

      Thanks

      0
      #16543
      really
      Participant
      @st3rn

      I figured it all out:

      I reinstalled everything and forgot to check the (run as Admin on the VP .exe) box, mostly I didn’t notice because all of the other tables were running just fine.

      Also, the UltraDMD instructions are all wrong and the files on the main UltraDMD site don’t work right.

      I downloaded these files: (thanks to fren)

      https://www.dropbox….traDMD.zip?dl=0

      Then made an UltraDMD folder on C: and unzipped the files into that folder, then ran the command prompt as Admin, cd then cd ultradmd then ultradmd.exe i, the instructions everywhere say ultradmd.exe /i which is wrong, then I put the gifs folder for AMH into the UltraDMD folder that I made on C: (with the UltraDMD .exe) and not in the VP tables folder like everyone was telling me to do, now it all works. People need to try their own instructions after they write instructions. Even the wordpress page, yes the main UltraDMD site has the instructions wrong!

      Later

      0
      #16544
      really
      Participant
      @st3rn

      I can’t even come up with words on how fun it is to play this pin.

      0
      #16545
      randr
      Keymaster
      @randr
      ModeratorMember

      It is a great table. well done for sure!

      0

      ********************************************************
      Messing with the VPinball app and push notifications.
      So if you haven't downloaded app yet what are you waiting for!?
      for IOS and Android

      ********************************************************

      #16546
      really
      Participant
      @st3rn

      Actually I had to put the gifs in both the tables folder and the UltraDMD folder that I made on C:.

      Hmm, couldn’t edit my post.

      0
      #16547
      really
      Participant
      @st3rn

      Now for some reason the table locks up at the end of the game. The DMD won’t show the match score and I can’t restart a new game without hitting Esc and F5 again. Any fix?

      0
      #16548
      really
      Participant
      @st3rn

      ***Fixed for now! For some odd reason UltraDMD lost it’s Admin rights.

      0
      #16549
      nate
      Participant
      @nodzebra

      your dropbox link is incomplete and i cant get anywhere even using i as the command it just gives an instant error message, using admin prompt, manually unblocked every single file in the directory,,,,this is starting to suck ass something fierce! why the hell wont ultradmd just fawking register

      0
      #16550
      nate
      Participant
      @nodzebra

      solved: if anyone else is having any issues with x/ultradmd on windows 10 just use the universal VP installer that you can find under ”vpx official” on this site and it will register ultradmd and update your vpx to the current official build, thanks to hmueck for putting together this installer and thank you ben heck, freneticamnesic and shoopity for this great table!

      0
      #16551
      Marc
      Participant
      @marcdaddy

      Hi guys im having a hard time getting the Backglass to launch so im getting No feedback ( went in DOFConfig and generated a new file with the proper table settings ) so im not getting the B2S server to launch. Im getting Music, I have the DMD working, just cant get past this l;ast step. I created a text file and named LMEMDOFTables and I put a 1 in it and Saved. What could I have missed?

      0
      #17755
      Lucky1
      Participant
      @lucky1

      Just made a quick hack to allow UltraDMD to display gif animations and pictures in full color on screen and PIN2DMD. PM me if you are interested Fren and I will send you the exe. I believe AMH would be great in color and deserves to be the second original table after my own (Captain Future) with full color DMD :yahoo:

      #17760
      freneticamnesic
      Moderator
      @freneticamnesic
      vipModeratorMember

      Dude yes let me have it. Most of the animations for AMH are color video that’s been greyscaled, I think converting to color would be (relatively….) easy since it was all produced at very high contrast in the first place.

      Punch it!

      #17761
      freneticamnesic
      Moderator
      @freneticamnesic
      vipModeratorMember

      Also, all my Futurama UltraDMD table videos are already in full color so they would display great too! I’ll share it with you for more testing if you want

      Punch it!

      #17858
      freneticamnesic
      Moderator
      @freneticamnesic
      vipModeratorMember

      Punch it!

      #17860
      freneticamnesic
      Moderator
      @freneticamnesic
      vipModeratorMember

      @Joerg joerg joerg

      Punch it!

      #23401
      visualpinballfan
      Participant
      @johndo

      ***Fixed for now! For some odd reason UltraDMD lost it’s Admin rights.

      <span class=”count-box”>0</span>

      what do you mean lost its admin rights? how did you get them back? im having the same problem you are, sometimes the game ends fine, but sometimes just a black dmd screen and I have to reset at the end of the game.

      #38766
      MnHotRod
      Participant
      @mnhotrod

      Hope this isn’t too newbie a question to ask, but how do I get the DMD in its correct orientation, and placed on my second monitor? Right now, the DMD is sideways on the right side of my playfield.

      #38767
      Umpa
      Participant
      @umpa
      Member

      Click on the dmd with your mouse and drag it to your second screen

    Viewing 20 posts - 1 through 20 (of 149 total)
    • You must be logged in to reply to this topic.
  • Please login to download.

  • ©2020 VPinBall.com

    Log in with your credentials

    or    

    Forgot your details?

    Create Account

    The Vpinball app

    FREE
    VIEW