• Don't forget to rate 1-5 stars! Check the support tab for any help or comments.

  • (15)
    « »

    Hey ninuzzu has submitted to me a vpx conversion of my bbb table. it combines my original table with the models from the fp table. Rom has given me permission to use his models and i’d like to thank him for that.

    unzip and install in tables folder

    This topic contains 51 replies, has 21 voices, and was last updated by  curlyjoe 4 months, 1 week ago.

    Currently, there are 0 users and 0 guests visiting this topic.
    Viewing 20 posts - 1 through 20 (of 52 total)
    • Author
      Posts
    • #16820
       randr 
      Keymaster
      ModeratorMember

      Hey ninuzzu has submitted to me a vpx conversion of my bbb table. it combines my original table with the models from the fp table. Rom has given me permission to use his models and i’d like to thank him for that.

      3 users thanked author for this post.
      #16821
       Thundernoggin 
      Participant

      Thank you so much for the great table. I’m playing in desktop mode and the DMD is missing. Is there a way to use the stock DMD? I ran into the same problem with Shrek and it was the VPMDMD but I’m not sure how to fix this table.

      0
      #16822
       randr 
      Keymaster
      ModeratorMember

      Should be there? click backdrop and drag the green dmd away. the if that dont work rem out line 11 in script or set ccontroller on line 17 to 1 works on my desktop so not really sure if none of that dont work ask in these forums for a tip

      0

      ********************************************************
      Messing with the VPinball app and push notifications.
      So if you haven't downloaded app yet what are you waiting for!?
      *******************************************************

      #16823
       Thundernoggin 
      Participant

      REM line 11 does not work. Changing line 17 from 3 to 1 does cause it to appear but I lose my backglass. Right now I’m running B2S on a secondary monitor in my cockpit right next to the main monitor. Thanks for the reply and thanks for getting me totally hooked on virtual pinball about four weeks ago when I saw one of your videos. Over two hundred PinballX tables later LOL.

      0
      #16824
       randr 
      Keymaster
      ModeratorMember

      :) then try alt-tab to vpm window it must be behind backglass or playfield. toggeling alt-tab should bring it forward then you can move it to proper place. maybe :)

      0

      ********************************************************
      Messing with the VPinball app and push notifications.
      So if you haven't downloaded app yet what are you waiting for!?
      *******************************************************

      #16825
       Thundernoggin 
      Participant

      I got it. The B2S Server had the backglass set to standard instead of visible. First time I’ve ran into that. 970th time I’ve learned something in the last weeks. Thank you!

      0
      #45444
       waffen_spain 
      Participant

      GREAT TABLE THX!!!!

      I only have an issue, the sound of the ball running is driving me crazy, sounds way too loud and repetitive, like a giant ball over a stone :/

      #45445
       randr 
      Keymaster
      ModeratorMember

      Look in script toward end for ball rolling sounds you will see code for it change to fit what you like for volume. I am not at computer to give example but I’m sure someone else can

      ********************************************************
      Messing with the VPinball app and push notifications.
      So if you haven't downloaded app yet what are you waiting for!?
      *******************************************************

      #49125
       softfish 
      Participant

      GREAT TABLE THX!!!! I only have an issue, the sound of the ball running is driving me crazy, sounds way too loud and repetitive, like a giant ball over a stone :/

      Great table, I agree with you on the ball sounds. They are pretty bad in comparison to some other tables. Hopefully the author will have another look at them sometime in the near future.

      #49137
       Pinball Shawn 
      Participant

      My skill shot lights have stopped since updating to 10.2. Am I alone on this?

      #49174
       freelunch 
      Participant
      Member

      My skill shot lights have stopped since updating to 10.2. Am I alone on this?

      I do not have this problem with 10.2.

      Perhaps you need to update to the latest VPinMAME? Or maybe you’re missing something in your 10.2 build, you could try redownloading, I’m using 10.2.1.

      If that’s not the problem, you could try this. Open your folder  for VPinMAME/nvram and move “bbb109.nv” out of the folder. This will reset your ROM settings and high scores for this table. If that doesn’t help (you can move back the original file), I’m not sure what the problem might be, perhaps someone else can help.

      GREAT TABLE THX!!!! I only have an issue, the sound of the ball running is driving me crazy, sounds way too loud and repetitive, like a giant ball over a stone :/

      Great table, I agree with you on the ball sounds. They are pretty bad in comparison to some other tables. Hopefully the author will have another look at them sometime in the near future.

      Look in script toward end for ball rolling sounds you will see code for it change to fit what you like for volume. I am not at computer to give example but I’m sure someone else can

      To do this, open the script and CTRL+F “JP’s VP10 Rolling Sounds” and change the line

      [code]PlaySound(“fx_ballrolling” & b), -1, Vol(BOT(b) ), Pan(BOT(b) ), 0, Pitch(BOT(b) ), 1, 0[/code]

      to
      [code]PlaySound(“fx_ballrolling” & b), -1, Vol(BOT(b) )*0.1 , Pan(BOT(b) ), 0, Pitch(BOT(b) ), 1, 0[/code]

      The 0.1 number can be changed to suit your preference. A smaller fraction like 0.01 would be quieter, a larger fraction like 0.5 would be louder.

      4 users thanked author for this post.
      #50330
       latin625 
      Participant

      Hi,  I am unable to see the backglass for this great table. can someone help?  Thanks!

      #50377
       randr 
      Keymaster
      ModeratorMember

      Just change controller to b2s.server in script

      ********************************************************
      Messing with the VPinball app and push notifications.
      So if you haven't downloaded app yet what are you waiting for!?
      *******************************************************

      #66758
       The Loafer 
      Participant
      Member

      Hi.  Just got around to trying this, man the lighting is BEAUTIFUL in this one.  One question though: there are a few pink items strewn about that I believe are what you see when materials are usually not assigned to them?  If it’s because the table isn’t finished yet, that’s cool, however I don’t see these in the screenshot associated with the table download, therefore thought it best to check into this.  America’s Most haunted has the same issue for me however I think that was about 99% done so I figured it is normal.

       

      If someone can confirm on this table, this is expected, I’m good (not complaining!). However if it’s because Randr posted the wrong table, then maybe I will complain! LOL  Appreciate the confirmation, amazing work on this table.

      #69181
       Will Thomas 
      Participant

      What a great table.  I played a real (reproduction) Big Bar Bang at the Silver ball museum near my house and its uncanny

      I am getting some occasional stutter.  Only table this occurs on.  Any one else getting occasional stutter?

      #70549
       Tamachi 
      Participant

      Hi. Just got around to trying this, man the lighting is BEAUTIFUL in this one. One question though: there are a few pink items strewn about that I believe are what you see when materials are usually not assigned to them? If it’s because the table isn’t finished yet, that’s cool, however I don’t see these in the screenshot associated with the table download, therefore thought it best to check into this. America’s Most haunted has the same issue for me however I think that was about 99% done so I figured it is normal. If someone can confirm on this table, this is expected, I’m good (not complaining!). However if it’s because Randr posted the wrong table, then maybe I will complain! LOL Appreciate the confirmation, amazing work on this table.

      Hello ! Wonderful table, but sadly i have the same bug mentioned by The Loafer (Pink items on the table) and sometimes ball get stuck near bumper zone, and finally when two balls are locked in the 2 “alien heads” game is stuck and multiball won’t start.

      Thanks again for the great table, it would be awesome if someone could look into these bugs.

      #70721
       DJ Wheels 
      Participant

      Another great table. Thank you!

      #101101
       giovanni1966 
      Participant

      Thank you for the nice table.

      The ball gets caught above the yellow plastic tube. Not every time. But if it does, then nudging does not help.
      Another time the ball got caught above the drop target bank.

      10.5.0 rev 3490

      Attachments:
      #114504
       lonchaney 
      Participant

      Very beautiful table, thanks for your work. :) I have the same problem as above, the pinky circles. Is someone know how to remove them?

      #114506
       Thalamus 
      Moderator
      ContributorMemberModerator

      Ninuzzu is the author of this table and I don’t know if he’s been around our community lately ?

    Viewing 20 posts - 1 through 20 (of 52 total)

    You must be logged in to reply to this topic.

  • Please login to download.

  • ©2019 VPinBall.com

    WP2Social Auto Publish Powered By : XYZScripts.com
    Vpinball.com

    Log in with your credentials

    or    

    Forgot your details?

    Create Account