• Don't forget to rate 1-5 stars! Check the support tab for any help or comments.

  • Don't forget to "THANK" or "LIKE" the Author's 1st post in support topic.

  • Download Info

    Thumb
  • VPX Conversion by: Goldchicco & 32assassin

    Apron by Mussinger

    Special Thanks to :

    32assassin for helping me with this conversion and for sharing his passion, knowledge and time.

    Frank Hollinger for redrawing the apron.

    Thank you to:

    Chinzman93 for the VP9 version and for giving the OK to proceed with this project.

    This table was realized with you in mind... so please leave constructive feedback or comments in the support topic and will try to make it better.

    Permission to Mod:  you must ask / get permission first.

    All Logos, Copyrights and Trademarks are property of their respective owners.

    PROVIDED STRICTLY FOR PERSONAL / HOME USE AND NOT FOR COMMERCIAL SALE / RE-SALE OR DISTRIBUTION!

    This is the 4 Players version, please use the suggested rom.

    Rom Here:

    https://www.vpforums.org/index.php?app=downloads&showfile=646

    Backglass Here:

    https://www.vpforums.org/index.php?app=downloads&showfile=9664

     

     

     

    ver 2.0

    New saucer primitive

    Saucer cup radius set at 35 for more realistic play

    Script enhanced and added missing sound(s) thanks to @Thalamaus

    Added 2 missing rubbers

    Added correct dipswitch to the script (thanks to @Mike DA  Spike)

    If you want to change the Runs to Beat at 25 just launch the table press F6 and make the change click OK then press F3 to refresh. Done

    ver 2.1

    Script and sounds enhanced for DOF users (Thanks @Arngrim)

    ver 2.2

    New Playfiled, Plastics & Apron (Thanks @movieguru)

    Currently, there are 0 users and 0 guests visiting this topic.
    Viewing 20 posts - 1 through 20 (of 52 total)
    • Author
      Posts
    • #190265
      Goldchicco
      Participant
      @goldchicco

      VPX Conversion by: Goldchicco & 32assassin

      Apron by Mussinger

      Special Thanks to :

      32assassin for helping me with this conversion and for sharing his passion, knowledge and time.

      Frank Hollinger for redrawing the apron.

      Thank you to:

      Chinzman93 for the VP9 version and for giving the OK to proceed with this project.

      This table was realized with you in mind... so please leave constructive feedback or comments in the support topic and will try to make it better.

      Permission to Mod:  you must ask / get permission first.

      All Logos, Copyrights and Trademarks are property of their respective owners.

      PROVIDED STRICTLY FOR PERSONAL / HOME USE AND NOT FOR COMMERCIAL SALE / RE-SALE OR DISTRIBUTION!

      Total of 45 users thanked author for this post. Here are last 20 listed.
      #190269
      makmak
      Participant
      @makmak
      Member

      Screenshot looks real like crazy, cant wait to try! Thx for sharing your tremendous amount of work (not this table only)!

      2 users thanked author for this post.
      #190270
      Bendo
      Participant
      @bendo

      Cool, thanks a lot for all your hard work !!!

      1 user thanked author for this post.
      #190273
      Thalamus
      Moderator
      @thalamus
      ContributorMemberModerator

      Preview looks very nice guys. Thank you very much @goldchicco and @32assassin !

      Downloading now.

      1 user thanked author for this post.
      #190280
      Bladeof
      Participant
      @bladeof
      Member

      Looks very good, can’t wait to try it. Thanks to everyone involved.

      1 user thanked author for this post.
      #190284
      Badazzwi
      Participant
      @badazzwi
      Member

      Thank you goldchicco and 32a for bringing these gems to vpx. Thanks also to to the original authors and everyone else involved. I look forward to trying this out.

      Hi my name is Barry and I'm a virtual pinball addict.

      1 user thanked author for this post.
      #190285
      Thalamus
      Moderator
      @thalamus
      ContributorMemberModerator

      A small issue. Ball can get trapped between PegPlasticT020 and the bumper shown. Also, while shaking it loose I got points. So, the tilt switch doesn’t seem to be the correct one B-)

      Attachments:
      #190287
      TommyMc
      Participant
      @tommymc

      Thanks for your hard work

      1 user thanked author for this post.
      #190302
      Tom
      Participant
      @armyaviation
      MemberContributor

      I was going to build this table but I didn’t have a manual and good playfield images.  The table screenshot looks great.  We’re you able to locate the manual

      1 user thanked author for this post.
      #190304
      LTA
      Participant
      @luvthatapex
      Member

      wow I don’t remember playing this one back in the day. I saw a video about it too so we can compare! Your looks great, can’t wait to load it on the cab.

       

       

      1 user thanked author for this post.
      #190307
      Goldchicco
      Participant
      @goldchicco

      @Thalamus

      Good catch.

      Found out those three element were Toys and no Collidable: PegPlasticT020, PegMetalT024, PegMetalT025

      changed to Collidable and problem solved.

      tilt switch is actually sw15, I typed 14 by mistake.

      Uploading ver 1.1

      Attachments:
      #190311
      Goldchicco
      Participant
      @goldchicco

      @Tom

      https://www.ipdb.org/files/1079/Bally_1983_Grand_Slam_Manual.pdf

       

      #190312
      GuruChoc
      Participant
      @guruchoc
      Member

      Thanks a lot, one of my fav games from the Bowling Alley where I played as a kid, now to spell HOMER in the correct order again and again.

      G

       

      • This reply was modified 2 months, 2 weeks ago by GuruChoc.
      1 user thanked author for this post.
      #190316
      kds70
      Participant
      @kds70
      Member

      Thanks @guruchoc and JP for this nice table release; a lot of fun and looks nice. There are some solenoid calls not working for DOF.

      By the way i´ve identificated two of them at this time – those 2 bumpers are not working.

      So i was reading the grand slam schematics and the bumpers needs to be configured as shown here:

      Sub Bumper1_Hit: vpmTimer.PulseSw 13 : PlaySound SoundFX(“bumper1”,DOFContactors)

      Sub Bumper2_Hit: vpmTimer.PulseSw 14 : PlaySound SoundFX(“bumper2”,DOFContactors)

      Maybe more later; thanks for this table :rose:

      VPin: Williams Time Warp Cabinet (1979), 4K playfield: 40" Iiyama X4071UHSU, backglass: 32" LG. Pin2DMD, Pincontrol 1, LEDWiz, leaf switches / buttons, nudging, tilt, plunger, 10 big siems contactors / knocker, PC: Intel i5 2500k@4.5Ghz, 8 GB Ram, Zotac GTX 1070 Mini, Win10

      1 user thanked author for this post.
      #190321
      Goldchicco
      Participant
      @goldchicco

      @Kds70

      That bumpers solenoids call is already fixed in ver 1.1 – see picture attached.

      I’m glad you are thanking JP (great Author) and  GuruChoc but this conversion was made possible by Me and 32assassin.

      Hope you will enjoy the table

      • This reply was modified 2 months, 2 weeks ago by Goldchicco.
      Attachments:
      #190324
      kds70
      Participant
      @kds70
      Member

      I’m glad you are thanking JP (great Author) and GuruChoc but this conversion was made possible also by Me and 32assassin.

      :wacko: My mistake … too much “bumper solenoid thinking” attached in my head :mail: ;-)

      VPin: Williams Time Warp Cabinet (1979), 4K playfield: 40" Iiyama X4071UHSU, backglass: 32" LG. Pin2DMD, Pincontrol 1, LEDWiz, leaf switches / buttons, nudging, tilt, plunger, 10 big siems contactors / knocker, PC: Intel i5 2500k@4.5Ghz, 8 GB Ram, Zotac GTX 1070 Mini, Win10

      #190327
      outhere
      Moderator
      @outhere
      MemberContributorvipModerator

      Thanks for the nice VPX Version   – @goldchicco & @32assassin
      I was going to post about the bumpers but I see @kds70 beat me to it —  Thanks for the update also

      1 user thanked author for this post.
      #190328
      Goldchicco
      Participant
      @goldchicco

      @kd70 & @outhere

      All good, ver 1.1 fixed the bumpers calls

       

      #190330
      hotpepper
      Participant
      @hotpepper

      Very nice table! Thank you!

      1 user thanked author for this post.
      #190341
      Crakkers
      Participant
      @crakkers

      Thanks for another wonderful looking table guys. Much appreciated.

      1 user thanked author for this post.
    Viewing 20 posts - 1 through 20 (of 52 total)
    • You must be logged in to reply to this topic.
  • Please login to download.

  • ©2020 VPinBall.com

    Log in with your credentials

    or    

    Forgot your details?

    Create Account