VPB Downloads

Siggi's new Freddy Nightmare on Elm Street mod is too good not to be on my cab!  However; I love the original artwork (I know most here don't lol), so I wanted to have both on the cab, but I felt like I needed them to look like different tables.  So, for I put together an Alt backglass and I made a new wheel to go with it for my front end.    I made it for my cab, but figured I would share in the chance anyone wanted something different.  I have yet to test the backglass on my cab (I do my edits at work) so if there are any problems I won't know until tomorrow.  I used Wildmans awesome backglass as a template so thanks to him for the original which can be found here http://vpuniverse.com/forums/files/file/4711-freddy-a-nightmare-on-elm-street-gottlieb-1994/   Read More

Cybernaut (Bally 1985) wheel for mistermixer - schreibi34 new upload

Wheels for Dipsy Doodle (Williams 1970)

VPX conversion of thanks to Bodydump, GNance, Arngrim others to thank: JPSalas, Pinuck, hauntfreaks, Borgdog in addition to the "standard" keys (typically "1" to start game and "5" for coin), I've added "3" as another coin input and "4" for coin and auto-start game (like I recall the dime slots generally were) to simulate 3 coin slots when game is not in progress, holding down left flipper for about 3-5 seconds will bring up the options menu. left flipper selects item, right flipper changes option. I've also included shadows for the ball and flippers. If you want to turn them off look for these lines at the beginning of the script: Const ShadowFlippersOn = true Const ShadowBallOn = true change to false if you want either of the shadows not showing on your tables   Read More

A small PuPPAck for Williams Taxi including Topper. tested with rom taxi_l4 More of an animated BackGlass. For this pack no db2s backglass is needed (so delete or rename before). To trigger the videos I also had to use switches and lights (unfortunately this is not so accurate).  Therefore it can come to small errors with the video playback. Who would like can try to get it even better. (I could not do it unfortunately.) Have Fun with it.     Read More

Gottlieb's Surf Side (1967) 2 Players   Artwork by GNance   Built on VPX 10.5    Read More

Cybernaut (Bally 1985 )   vpx Special thanx to Schreibi34 for his excelent 3D work Included in downloadfile : original+darkmod+direct B2S+dof config line      Read More

A wheel to go with Kees Joust (Bally 1969)

Wildman recently uploaded a backglass for the shuffle board table League Champ.   It is a clone (for the most part) of strike master.  Out of boredom, I decided to see what the real differences between the tables were and it really was just the backboard and backglass.  However; there are minum resources out there for this table, so I had to make due with what I found.  Here is what I came up with.   For the life of me, I can not figure out where the lights are on this table, so I am unable to finish the lights on the new backboard.  If someone wants to use this to update their table or make it better this could be a nice starting point.   Read More

Love Bug (Williams 1971) https://www.ipdb.org/machine.cgi?id=1480 1 player with options for add-a-ball or novelty VPX 10.6 (I know - this 3 pack breaks my rule of no builds using betas but the saucer kicker needed the primitive playfield) Note: don't complain about the logo on backglass - there are absolutely no good images for the real thing, so this is as good as it gets from me. Seriously, if someone has a really good image of Love Bug's backglass, send it to me and I'll re-do the directB2S file. This one was a group effort: Source Images: Rosve & Osprey101 Image re-working and initial table layout: Tom Table mesh redo & new sounds: Thalamus Coding: Loserman76 Doodle Bug source Backglass: Wildman     Read More

Dipsy Doodle (Williams 1970) https://www.ipdb.org/machine.cgi?id=683 4 players VPX 10.6 (I know - this 3 pack breaks my rule of no builds using betas but the saucer kicker needed the primitive playfield) This one was a group effort: Source Images: Rosve & Osprey101 Image re-working and initial table layout: Tom Table mesh redo & new sounds: Thalamus Coding: Loserman76 Backglass: Editoy, Wildman   Read More

Doodle Bug (Williams 1971) https://www.ipdb.org/machine.cgi?id=703 1 player with options for replay, add-a-ball or novelty VPX 10.6 (I know - this 3 pack breaks my rule of no builds using betas but the saucer kicker needed the primitive playfield) This one was a group effort: Source Images: Rosve & Osprey101 Image re-working and initial table layout: Tom Table mesh redo & new sounds: Thalamus Coding: Loserman76 Backglass: Wildman   Read More

Some wheels for the new Joust table

- Initial release - Skillful table - End of ball bonus - directB2S backglass included    Read More

Williams' Kickoff (1967) One player add-a-ball version of Touchdown. Mechanical backbox (football moves up the field). Source images thanks to Jon Osborne Artwork redrawn by GNance VPX 10.5     Read More

Williams' Touchdown (1967) One player replay game. Mechanical backbox (football moves up the field). Source images thanks to Jon Osborne Artwork redrawn by GNance VPX 10.5   Read More

Original table in VP8 is done by Leon Spalding. Script, plastics and playfield is done by Leon Spalding. Rebuild and improved script is done by -=Kees=-   Read More

This is a conversion of the Heman Masters of the Universe DOFLinx - Cabinet Edition(terryred mod) version So all credit goes to Rom! for the very unique FP build. Thanks Rom HUGE thanks to TerryRed for his DOF additions and his attention to the original FP table DETAILS that i would have missed without him. Thanks to Thalamus for adding SSF. Used Flupper's dome technic and all his resources from example table. there is a few bugs I AM SURE so releasing as a Beta and hopes people will find bugs, Help fix them or even work out the high score and multiplayer scripting that's already in table but i haven't tried getting it working yet. I also struggle with lighting so its not perfect but is working.       Read More

This is a conversion of the Jaws DOFLinx - Cabinet Edition version So all credit goes to Rom, Gimli and Slamt1lt! All i did is copy the FP table over to VP and convert the script. Thanks to Hauntfreaks for the help first few days supplying basic table build with lights and PF images! Lets hope he returns soon so he can put the rest of his magic on this build! I used Flupper's dome technic and all his resources from example table. Thanks to Roth for the help getting the flashers to blink correctly with Flashforms. THERE IS NO Backglass or DOF so maybe someone can do that? All of Terrys DOF calls are in script from the FP version. I know there is a few bugs: Tilt issue if tilted in plunger lane so don't do it. Green lock lights just have a simple light object but did add flasher objects but honestly with all the drama i have lost the drive to finish them! so if anyone can tweak the lighting or flashers please let me know! Seems the ball can get hung in pop bumper for a bit longer then normal...maybe someone has a tweak for that?       Read More

This started as a mod of Scotty VH's Memory Lane and turned into a complete rebuild.  Special thanks to @scottt for doing the initial build of this table.  I didn't get to see what the redraw started from but it was done very well but just needed some adjustment.  I took the whole image and shifted it up to allow the space for the ball to drain at the bottom.  I adjusted the colors in the table to the correct shade and rebuilt the whole area around the top kickout hole. Replaced the apron and all gates with new primitives. Thanks to @Randr for helping me get the rollover buttons in the center to look properly when lit.  We replaced them with primitives and adjusted the lights so it looks like they are lit up instead of a light sitting on top. Thanks to @Thalamus for building a PF primitive for both kickout holes, for redoing the physics on the table and for going over the script and sounds for his SSF. Plastics were redone and thanks to @32Assassin for use of his back plastic from Sting Ray. Scotty VH's wheel image: https://vpinball.com/VPBdownloads/memory-lane-stern-1978-wheel-image/   Read More

Here is my new Bally Hoo (Bally 1969) Wheel Image, there weren't a fine one … hope you like and use it, Have Fun !   Read More

You're gonna need a bigger pincab! This is the VPX version of my Jaws PuP-Pack. It's a fairly simple table so it only took a few days...but I may update it later when I have more time. I had a couple of days free time away from my military training course, so I finally got this sucker done! A video demo of the PuP-Pack can be found here: https://youtu.be/rHyy1aXLLuA   NEW!  PuPDMD and PostDMD files by LynnInDenver. These will allow to use a modern LCD displays for PuP based scoring with animated backgrounds. You can use these to display your scores instead of UltraDMD. PuPDMD is for LCD DMDs and PostDMD is for full-size 16:9 modern Stern-style displays.   REQUIREMENTS:   VPX Table 1.0b or higher. You MUST use the newly updated 1.0b version of the VPX table...as I have added the additional triggers needed for ALL the PuP-Videos to the table script. This pack will not work correctly without it! You can the the updated table here: https://vpinball.com/VPBdownloads/jaws-future-pinball-to-visual-pinball-build/   Pinup Player 1.4 or higher installed and working. http://www.nailbuster.com/wikipinup/doku.php?id=install_guide   This current version does not support toppers....but it will play fine on all setups, including 2 screen cabinets.   2 Screen cabinet users: Using the pup-pack editor, you need to disable Screen 12 (the "TEXT-DMD" Screen) to allow a space for your DMD to be shown on the backglass.   INSTALLATION: Simply copy the "Jaws" folder from the PuP-Pack zip to your PUPVideos folder.   NEW! Optional PuPDMD and PostDMD files from LynnInDenver: - new PuPDMD and PostDMD files by LynnInDenver. These will allow to use a modern LCD displays for PuP based scoring with animated backgrounds. You can use these to display your scores instead of UltraDMD. PuPDMD is for LCD DMDs and PostDMD is for full-size 16:9 modern Stern-style displays. -simply copy the DMD and FONTS folders from the Jaws_PupDMD_PostDMD.zip to your "jaws" pup-pack folder. Then choose which option you want in the table script. -if using PuPDMD, make sure your PuP DMD display is setup correct in your default PuP Display settings. -if using PostDMD, make sure your PuP Music display is setup correct in your default PuP Display settings (this is used for size and position reference). Enjoy!   Thanks goto Rom and SLAMT1LT for the original FP tables, and RandR for the VPX conversion! Thanks also to Tarcisio Caleiro for his excellent Jaws default background video!       Read More

Experience the power of Grayskull with my all-new "Masters of the Universe (VPX) PuP-Pack - Royal Boob Edition". I took my Future Pinball Mastered mod, and gave it the power of Pinup Player! Featuring: - overlay Castle Grayskull image - background "sky" layer that changes for each multiball mode, and also will strike lightning when you press the left and right flippers during normal gameplay modes. (it will delay between lightning strikes, so don't go crazy expecting a nutty lightning storm) - Castle "eyes" layer will glow and change colour for each game mode, and some game events - Castle "mouth" layer will play videos for various in game events and modes. - 2 packs to choose from: "Text on the Backglass", and "No Text on the Backglass" - new "Text on Topper or Under" screen "option". Plays videos of all the animated text (and logo) with a nice castle stone backdrop, on your Topper or Under screen.  Toppers are 21:9 (1920×822), and Unders are a wider ratio (1920×562) - new PuPDMD and PostDMD files by LynnInDenver. These will allow to use a modern LCD displays for PuP based scoring with animated backgrounds. You can use these to display your scores instead of UltraDMD. PuPDMD is for LCD DMDs and PostDMD is for full-size 16:9 modern Stern-style displays.   A video preview of the PuP-Pack with the VPX table can be seen here:   https://youtu.be/L7-L2aJjjrM   System:  Visual Pinball X (version 10.5+)   Credits: - PuP-Pack was created by: TerryRed - the original (stunning) Castle Grayskull image was made by Ankit Bhatnagar. https://www.artstation.com/artwork/Vvynn - The Castle Grayskull image was edited and made into an Overlay frame by Tarcisio Caleiro. - Topper and Under Castle Stone backdrop video by Tarcisio Caleiro. - The video effects were created by AA VFX: https://www.youtube.com/channel/UCilPIl-SwFbtsoH8WLnvlfA - The Visual Pinball X conversion (of Rom's excellent Future Pinball original table) was converted by randr. - Pinup Player (the software that plays the active video backglass) was created by Nailbuster. - PuPDMD and PostDMD files were created by LynnInDenver   This PuP-Pack uses the following PuP-screens: Screen 2 - Backglass (Underlay Video Layer) Screen 7 - Other1/Backglass 2 (Mouth Videos) Screen 8 - Other2/Topper 2 (Eyes) Screen 0 - Topper (Text) "Optional" Overlay - Castle Frame Layer (assigned to screen 2) Important! If you have ANY of the above PuP screens "rotated" in the PuP default settings (you shouldn't though), then those same screens will also be rotated in this PuP-Pack!   2 Screen Users: Please note that I DO NOT have a 2 screen setup for this pack.There simply isn't enough space for a DMD and the videos with Text,etc to work properly. The Overlay image can be edited to make room for the DMD if you want (remove the bottom area of the Castle mouth). Combining that with the "No Text on BG" PuP-Pack would be your best option.   ============================================================= REQUIREMENTS: IMPORTANT!   Masters of the Universe (VPX) table: This PuP-Pack will only work with the VPX version of the table found at this link. You need the latest update to use the PuPDMD and PostDMD files. https://vpinball.com/VPBdownloads/masters-of-the-universefp-conversion/ Visual Pinball X 10.5 All in One or higher installed (this is to include newest B2S Server, and UltraDMD): https://vpinball.com/VPBdownloads/categories/vpx-exes/ PINUP SYSTEM (1.3.7 or higher): PinUP System 1.3.7 FULLY installed and PinUP Player setup. (The Pinup Popper front-end is not required for PuP-Packs, for those who use another front-end) https://vpinball.com/VPBdownloads/pinup-system-player-and-popper-front-end-install/ PinUPPlayerB2SDriver and B2S SERVER SETTINGS: Be sure that your PuPB2s Driver and B2S server settings are setup and working correctly so you don't get any errors. http://www.nailbuster.com/wikipinup/doku.php?id=puppack_troubleshoot NO DIRECTB2S BACKGLASS RUNNING: You MUST NOT have a directb2s running at all, or it may obscure the PuP Backglass!!! Simply make sure you have a copy of the VPX "Masters of the Universe" table (intended only for use with this PuP-Pack), and make sure it is named VERY differently to your directb2s file, so when you launch that copy of your table it won't launch the directb2s! FRONT-END MEDIA DISABLED FOR "Masters of the Universe" TABLE: Make sure you have no media displayed on your Backglass and Topper when launching the table from a front-end. Pinball X: In Games Manager, make sure you have "Hide Topper" and "Hide Backglass" enabled for the table you are using. Popper: In Games Manager, for the table you are using, enter -1 In the "Keep Displays ON" field (to not use Popper media on ALL Displays when launching the table) ================================================ INSTALLATION: Ensure there are no files in your "PUPVideos" "motu" folder (if that folder already exists). Choose either "Text on Backglass", or "No Text on Backglass" PuP-Pack. Copy the PuP-Pack "motu" folder from the PuP-Pack zip archive (of your choice) into your "PUPVideos" folder. Optional "Text on Topper or Under Videos": This "option" plays videos of all the animated text (and logo) with a nice castle stone backdrop, on your Topper or Under screen. This can be used with any version of the PuP-Pack. Copy the files from your choice of the Topper (21:9 ratio) or Under (wider ratio) zip, into the "PUPVideos" "motu" folder, overwriting all files! (you must copy all files for it to work). Note: Adding the "Topper - Under option" will overwrite all of the pup-pack settings! (as its needed for the topper videos to work). If you have a custom layout (different CustomPos, etc) of the pup-pack that was previously installed... make sure you backup your current screens.pup file for the pup-pack so you can copy over your settings to the new screens.pup file. NEW! Optional PuPDMD and PostDMD files from LynnInDenver: - new PuPDMD and PostDMD files by LynnInDenver. These will allow to use a modern LCD displays for PuP based scoring with animated backgrounds. You can use these to display your scores instead of UltraDMD. PuPDMD is for LCD DMDs and PostDMD is for full-size 16:9 modern Stern-style displays. -simply copy the DMD and FONTS folders from the Motu_PupDMD_PostDMD.zip to your "motu" pup-pack folder. Then choose which option you want in the table script. -if using PuPDMD, make sure your PuP DMD display is setup correct in your default PuP Display settings. -if using PostDMD, make sure your PuP Music display is setup correct in your default PuP Display settings (this is used for size and position reference). "EYES" of Castle Grayskull: - if you don't want the Castle Grayskull "eyes" to change (and stay black), then edit the PuP-Pack and set Screen 8 to OFF, and SAVE the PuP-Pack. Alternate "Castle Mouth" Default Background Videos: - the default "Background" Castle Mouth video that will play (when no other videos are playing) is located in the "Background - BG" folder. If you wish to use another video instead, I have included other videos you can use. They are located in the "Background - BG - Alternates" folder. Simply replace the video file in "Background - BG" with your preferred video file from the "Background - BG - Alternates" folder. ================================================ Make your own "Castle Mouth" and "Sky Glow" Default Background Videos: - in the "Background - BG - Alternates" folder, I have also included the transparency files I used for creating the nice "shadowed" Castle Mouth videos, as well as the "Glow" for the Sky videos. You can use them with your favorite Video Editor to create your own videos to use if you want! Note:  "Castle Mouth" videos "must" be 1280x960, mp4, 30fps "Sky Glow" videos "must" be 1920x1080, mp4, 30fps This is to make sure they are in the same format as the other videos used. If they are in a different resolution or format, then you will get an ugly "blink" between each video, and it will look like ass. ================================================ PROBLEMS: If you have video stuttering or artifacts with PuP-Packs with VPX...  you most likely don't have VSYNC properly setup in VPX. Set "FPS Limiter/VSYNC" to 1, and "Maximum Pre-Rendered Frames" to 1 in VPX Video Options. This can also be set per-table in the Table's "User Customization" options, so check that as well. Having certain programs running in the background can also cause issues as they may interfere with VLC or prevent Overlays from displaying. Try closing out other programs / processes to see if that helps resolve any issues. For other issues with getting a PuP-Pack to work, refer to the wiki: http://www.nailbuster.com/wikipinup/doku.php?id=puppack_troubleshoot ================================================ NOTE: There WILL be additional versions of the PuP-Pack coming that will support Topper and Under setups. This will most likely have ALL Text being displayed on a Topper - Under instead of the Backglass. Keep an eye out for that!   Read More

This is a graphics mod of the fantastic Star Wars Data East Table. Thanks to DJRobX for allowing me to do this. Some will like it, some won't. It unclutters the table so you can better see what you're doing. I was encouraged to contribute no matter how big or small, so here it is. Hope you enjoy.   Read More

this is a VP9 to VPX conversion. VP9 table by freneticamnesic I copied and pasted each component into a VPX template and updated what i could with componets found on VPX. Undertaker toy and apron primitives by Dark. the decal on the apron can be changed Apron Decal.png = Stock decal Apron Decal 1.png = Royal Randar Pinball or you can hide it to show the Data East logo.   Note that this table will give you an error at load time.  playfield high power disabled by coin door interlock this is a PINMAME error,  their is no code modifications I can do to fix this.   Read More

I asked Michel if he had plans to release this table in VPX; he told me he was very busy and did not plan to rebuild any of his VP9 tables in VPX. if you like to learn how to build a table I suggest you start with his tables they are very well built the only thing you need to do is add all the features that have been added to VPX. Big thank you to him and  to Aldiode, Zany and Gtxjoe for their contributions for this table.   I'm sure I'm not the first to try to build this in VPX,  if you import the VP9 table into VPX and try to play it,  the ball bounces around the metal guide making the table unplayable.  I thought the code for the ball had to be rebuilt. as it turned out the code was un modified thanks to the primitive PF. THIS TABLE NEEDS TO BE PLAYED WITH VP 10.6 or higher!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! like the VP9 table  the dB2s is enabled by a text file in your VP folder Visual Pinball\User\LMEMTables.txt (I'm assuming everyone has the dB2s ; if you don't download the VP9 table to get it). The dB2s is just a static image. If you are using a Front-end you might be better of running a video (make one) or the static image. I like to updated the code to use the VPX controller.vbs file but thats not something I know how to do or plan to learn. If anyone likes to update the code feel free to do so.   Read More

I asked Michel if he had plans to release this table in VPX; he told me he was very busy and did not plan to rebuild any of his VP9 tables in VPX. if you like to learn how to build a table I suggest you start with his tables they are very well built the only thing you need to do is add all the features that have been added to VPX. Big thank you to him and  to Aldiode, Zany and Gtxjoe for their contributions for this table.   I'm sure I'm not the first to try to build this in VPX,  if you import the VP9 table into VPX and try to play it,  the ball bounces around the metal guide making the table unplayable.  I thought the code for the ball had to be rebuilt. as it turned out the code was un modified thanks to the primitive PF. THIS TABLE NEEDS TO BE PLAYED WITH VP 10.6 or higher!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! like the VP9 table  the dB2s is enabled by a text file in your VP folder Visual Pinball\User\LMEMTables.txt (I'm assuming everyone has the dB2s ; if you don't download the VP9 table to get it). The dB2s is just a static image. If you are using a Front-end you might be better of running a video (make one) or the static image. I like to updated the code to use the VPX controller.vbs file but thats not something I know how to do or plan to learn. If anyone likes to update the code feel free to do so.   Read More

Not many resources for this. Best I have.  Hope you choose to use it.

This is a collection of small avi videos I made for my cab, most of them will display a loop of manufacturer logo and then year at 3 seconds each, they are made at 128x32 which was no easy task on some logos they look pretty good on a real DMD though.  I don't think they will work to good on a monitor dmd. The new update has one for every year of most manufacturers the are generic you just copy and rename   Read More

As a fan of Visual Pinball and Star Wars I saw Siggi’s MANOWAR Mod and thought to myself this is so cool I am going to try to make a table myself. So here it is. I hope you guys have fun playing it. I am also no VP Professional it's just for fun. I want to thank JPSalas and Siggi, without them it was not possible to make. I used the French ROM (alpok_f6) like Siggi’s MANOWAR. I also made a backglass file that is included in the zip file.   Read More