The power board does not protect the coils from burning!
there are 3 options available:
- Use fuses ;) using them is ALWAYS a good idea
- build or buy a Pinscape chime board. They have a hardware protection timer installed so the coils will automatically shut off after 2 seconds of continuous use.
- Set “flipper logic” to your solenoid outputs in the Pinscape config tool. Define a lower “current” (in fact it’s pwm modulation) after eg. 100ms
if you need further assistance feel free to ask!
and btw:
youre lucky using a Pinscape as it has a electrical separation to your computer asa lack of that might have blown up your Mobo!
greetz,
Dom
You need to login in order to like this post: click here
