Thats exactly what I will be doing, and my tiny touch display will also post an image(cheat sheet) of what the buttons will do.
Well that’s the nice thing about ultimarc ultimate IO (link below), they have a led SDK(link below), so you can always mod everything yourself. For end user no programming they have led blinky (link below)
Yeah it went really well, considering I used every led port (32) on my ultimate IO board.. what really cleaned it up, was installing the IO card on the bottom of the trackball casing.. of course this requires opening it and modifying it.. but thats the cost.
I also had to repair a USB connector on one joystick (right bottom).. in other w…[Read more]
Well getting close to the end.. Wired up all the leds, buttons (all wire management), swapped the amplifier (the last one failed during the last burn in) , switched out two boost converters. Finished the gliding support frame, added the locking clamp hitches, and installed the insulating material.
Power demands have all been met, and everything…[Read more]
by disabling cUSEBGLASSREFL to zero you are also removing the rear depth table shadow, the texture was not meant to fade to nothing its meant as a shadow being cast by the backbox, The seams straight edge-ness should have been made more random..
Second before last update, again not great pics, all will be good by third post.
This second post shows the glide frame the FSS Rig sits upon. Works just like a dressed drawer, but with heavy duty left and right rails. The top of the wood platform is where the base of the monitor stand will fit into, and it will supply the counter-weight needed…[Read more]
Go figure on the very day I post this I get a message from Canada Post they finally decided to deliver my true 3-way crossovers, it’s only been in their hands for 3 weeks, it took one week from Hong Kong to Canada, then 3..(shaking my head). Now of course I won’t hold my breath on the condition of said items.
Yeah finally I know, Its been a long time coming! was really worried this new re-sized rig was going to fail also.. but it just passed the component clashing tests/reworking. Did not show anything until I was sure the clashing and acoustics all worked properly.
The unit is running with a 32bit ARM fanless processor with linux loaded. A touch…[Read more]
@Schreibi34 yes its a lot of work.. for anyone making a table its a huge time investment. Just as a small example of what I do , the backbox frame to this table took 4-5 hours to do, 1-2 hours to find the right images, 2 hours fixing the perspective as no images were available , and then 1 hour to rebuild portions of the photo that was not…[Read more]
finishing up the modding of bord’s Magic Circle. Also finishing up the reels for Borgdog’s Paul Bunyan.
Unfortunately for me I have to redo bords plastics, posts, bumpers.. ay yay yayeee. These tables are so much work now, I just may have to stop FSS mods altogether as it has become impractical to convert all those graphics, to a neutral…[Read more]