Forum Replies Created
-
AuthorPosts
-
Mounting for DMD is in place. Now i have to wait for the Pinscape controller to arrive.
You need to login in order to like this post: click here
The width of my DMD Monitor is 380mm – which height should i cut for the DMD with this width?
You need to login in order to like this post: click here
Have been playing with the arduino leonardo yesterday. It works but i still decided to go with something, that is more sophisticated and prooven to work, so ordered a KL25Z and will install pinscape on it.
Siderails are already there, but couldnt find a used Lockbar yet.
You need to login in order to like this post: click here
Cabinet is getting done. I will connect my Arduino which will control the flipper buttons tomorrow for a first test.
Attachments:
You need to login in order to like this post: click here
I have left 65mm space in the front – that should be enough for the buttons
You need to login in order to like this post: click here
Cabinet is starting to look like a pinball cabinet. How would you cover the edges of the tv later?
You need to login in order to like this post: click here
My side panels are 18mm wide. Should i put the t-molding in the middle of the panel? How deep should it be?
You need to login in order to like this post: click here
Yeah i guess i better stick to the channels. Just ordered them.
You need to login in order to like this post: click here
Ok got it. Thanks for the links!
You need to login in order to like this post: click here
Thanks! So i shouldnt be cutting the grooves?
You need to login in order to like this post: click here
Sorry some more questions:
Currently im thinking about how i will put the glass onto the cabinet. I started cutting a groove into the top of the side panels, where i wanted to put the glass. Are there siderails out there, which are about 18-25mm wide on the top side, in order to cover the glass?
Which siderails would you advice me to use?
You need to login in order to like this post: click here
How thick should the glas be? I was thinking of 6mm. Is it enough?
You need to login in order to like this post: click here
Thanks for the Sketch! Your cabinet is 600mm wide, is it a standard size for the lockbar? Which sizes are common?
You need to login in order to like this post: click here
3 more questions:
What size should the fan be? 120mm or more? Where would you place it? I was thinking about cutting it into the bottom plate of the Cabinet.
What are the sizes for the flipper button drills in the side panels? Is it 17mm?
What are the sizes for the main button drills in the front panel? Is it 35mm?
You need to login in order to like this post: click here
Thanks!
Yeah im designing it 630mm wide as im using a 42” TV. So its around wideboy sizes
You need to login in order to like this post: click here
It would be great if you could look up the exact size of the hole i need to cut :)
You need to login in order to like this post: click here
Good point! I´ve setup Visual Pinbal X on my PC and played around with some tables but i didnt count the buttons indeed. Currently planing stuff, so thats why im asking.
I will be opening a build thread when the action starts :)
You need to login in order to like this post: click here
Okay – thank you!
You need to login in order to like this post: click here
-
AuthorPosts