Forum Replies Created
-
AuthorPosts
-
@doogie it’s the same as Goldeneye, all in 3d all is optimize, i can’t do more… you can try to active more 3d mesh in Static Rendering but it’s not the same without lighting because it will desactive all light script for those objects… !! you can use the option to disable Lola too. i could not optimize it as much i would…
For the script, you’re right it seems higher than other, not than goldeneye…
For some reason I didn’t recall it being an issue on goldeneye, but sure enough I pulled it up and i’m getting the same stats and slowdown there too. I guess my GTX 1660 Ti isn’t going to cut it anymore?
You need to login in order to like this post: click here
Looks good, but I’m having issues with FPS. I run at 1080p 120hz, and with only a few exceptions, all tables are usually pinned at 120 FPS. With this one I’m getting around 90-100 FPS at best, however, and I noticed the Scripts stat is going over 50%, which I don’t think I’ve seen that high with any other table. Is there something specific to this table that might be causing this?
You need to login in order to like this post: click here
I noticed the same behavior when I tried this out. After a few more table launches, or when I exited the Pinup menu, the Pup pack finally started opening again.
You need to login in order to like this post: click here
January 6, 2019 at 11:46 am in reply to: GOTW December 30 – January 6 = sliderpoint's Doctor Who (Bally 1992) #108785The Sailor Man, Popeye!
You need to login in order to like this post: click here
January 5, 2019 at 9:29 pm in reply to: GOTW December 30 – January 6 = sliderpoint's Doctor Who (Bally 1992) #108740Here’s my little less than half score:
You need to login in order to like this post: click here
November 4, 2018 at 11:24 am in reply to: GOTW October 28 – November 3 – cyberpez's new Haunted House release #102623Well, that didn’t work out so well! Either way, Doogie, it’s your call for next week… which table do you choose for GOTW?
OK I want to try Jolly Park this week, but the volume is so low, does anyone know how to turn it up? I hit 9 a few times to get to the volume setting, but I can’t get it to change with A or ‘
You need to login in order to like this post: click here
November 4, 2018 at 11:22 am in reply to: GOTW October 28 – November 3 – cyberpez's new Haunted House release #102622When I play the game, The upper playfield doesn’t work.
I just gave up.
Do you have magna save buttons? If not I think you can change the FlipperKeyMod setting in the script to use normal flipper buttons for all the flippers.
You need to login in order to like this post: click here
November 3, 2018 at 8:21 pm in reply to: GOTW October 28 – November 3 – cyberpez's new Haunted House release #102586Well I played out my 50 games, and unfortunately my best game ended prematurely when it crashed with a “subscript out of range” error during ball 2:
You need to login in order to like this post: click here
November 3, 2018 at 7:14 pm in reply to: GOTW October 28 – November 3 – cyberpez's new Haunted House release #102582ok so I finally got an extra ball in my 30th game, only it didn’t award me an extra ball. i’m guessing it’s because “Novelty mode” is on? I don’t recall changing any settings, is this the default?
You need to login in order to like this post: click here
October 28, 2018 at 7:35 pm in reply to: GOTW October 21 – October 27 – nFozzy's Scared Stiff (Bally 1996) #101955Haunted House!
You need to login in order to like this post: click here
October 27, 2018 at 9:10 pm in reply to: GOTW October 21 – October 27 – nFozzy's Scared Stiff (Bally 1996) #101856Only got about 20 games in this week, and my best fell short of my score from the last time we did this one about a year ago.
You need to login in order to like this post: click here
October 13, 2018 at 5:15 pm in reply to: GOTW October 7 – October 13 – Back To The Future (Data East 1990) #100907Wow I was about to give it a rest, but it looks like I’ll have to try a few more games after all:
You need to login in order to like this post: click here
October 7, 2018 at 2:00 pm in reply to: GOTW September 30 – October 6 – The Getaway: High Speed II (Williams 1992) #100544Let’s go Back to the Future
You need to login in order to like this post: click here
October 6, 2018 at 6:09 pm in reply to: GOTW September 30 – October 6 – The Getaway: High Speed II (Williams 1992) #100524I feel like I could do better if I get some more games in, but I’ll submit this for now in case I don’t get to it.
By the way, this machine was recently featured on TV in a couple episodes of Better Call Saul. Too bad they used sound effects from an EM.
 Â
You need to login in order to like this post: click here
September 30, 2018 at 6:50 am in reply to: GOTW September 23-29 – Teenage Mutant Ninja Turtles (Data East) by Cyberpez #99884Wasn’t able to get a whole lot of games in, but after I scored 16M somehow on my first game I thought it would be easy, and of course never came close after that.
You need to login in order to like this post: click here
Doh actually I think it’s your pick since I already picked last week and Netranger the week prior.
You need to login in order to like this post: click here
Had a couple games getting close to my all time high of 210M, and then boom, this happened:
You need to login in order to like this post: click here
Hello thank you very beautiful just work a concern(marigold) with the music dashes(launches) on ball 1 and after ball 2 or ball 3 more of taken well music g the putting pinup in the daytime 1.3.7
Sorry…but I have no idea what you are asking? Or if you are asking anythingat all, and just posting.
I think he might be trying to say that there is music playing when launching the first ball, but for ball 2 and 3 there is none. I also experienced this when giving it a quick whirl last night.
Then if that is happening…then you guys didnt update to PuP 1.3.7 correctly, which is REQUIRED for this PuP-Pack to work correctly with the newer features it uses. I detailed why those updates are needed in a couple of posts above. The update files are linked in the description under Requirements.
We know how many people have actually been downloading the 1.3.7 update files (half of how many download the PuP-Pack)….so we know there are guys out there who aren’t reading what they should be in the description… haha!
Yep, that’s what I figured, which is why I didn’t post anything before I had time to check everything out, I was just trying to help you interpret the other guy’s statement.Â
You need to login in order to like this post: click here
Hello thank you very beautiful just work a concern(marigold) with the music dashes(launches) on ball 1 and after ball 2 or ball 3 more of taken well music g the putting pinup in the daytime 1.3.7
Sorry…but I have no idea what you are asking? Or if you are asking anythingat all, and just posting.
I think he might be trying to say that there is music playing when launching the first ball, but for ball 2 and 3 there is none. I also experienced this when giving it a quick whirl last night.
You need to login in order to like this post: click here
I’ll kick things off, this was mostly on my third ball after being distracted by the PUP videos and color DMD on the first two.
You need to login in order to like this post: click here
-
AuthorPosts