This topic has 2 replies, 1 voice, and was last updated 2 weeks ago by mazzaneo.Currently, there are 0 users and 0 guests visiting this topic. Viewing 3 posts - 1 through 3 (of 3 total) Author Posts January 12, 2021 at 11:26 am #219268 mazzaneoParticipant @mazzaneo Hi all, Got my matrix working at last however, using Getaway as a test I see there is a lot of bleed and an incorrect colour scheme. The cab file and alignment would seem to be correct. can it be something to do with my doflink config? This topic was modified 2 weeks ago by mazzaneo. You need to login in order to like this post: click hereAttachments:You must be logged in to access attached files. January 12, 2021 at 11:30 am #219273 mazzaneoParticipant @mazzaneo Let me know if you need me to link anything in particular. thanks in advance guys and gals! You need to login in order to like this post: click here January 12, 2021 at 3:04 pm #219299 mazzaneoParticipant @mazzaneo Solved, Upgraded the teensy firmware to Beta and all is good now. Isn’t that typical, you spend a whole day troubleshooting an issue and as soon as you give up and ask for help the solution comes to you! You need to login in order to like this post: click here Author Posts Viewing 3 posts - 1 through 3 (of 3 total) The topic ‘Does anyone know why my matrix display looks like crap!’ is closed to new replies.