- This topic has 0 replies, 1 voice, and was last updated 3 years, 11 months ago by .
Viewing 1 post (of 1 total)
Viewing 1 post (of 1 total)
RELUCTANTLY enabled site for everyone to view for historical reference only. Downloads area not publicly available.
Taking Baby steps…
Have a working DOF (Non DOFLinx) with Visual Pinball X working with combined toys… (I have 4 contactors and combined on each side for all the bumps left or right).
I wanted to do this with FX2 and Future Pinball stuff… as I only have 1 FX3 game.
DOFLinx 7.14 loads fine (via the logs) but nothing fires when playing any of the titles.
I verified in the logs
05-May-20 16:06:11.673 – DOFLinx device:1 Pinscape setup with 22 outputs
05-May-20 16:06:11.689 – DOFLinx device: 2 Initializing as LEDWiz #8 with ID=0
05-May-20 16:06:11.689 – DOFLinx Device: 3 Initializing as FTDI (Sainsmart) #1 serial # AB0KKHGN
05-May-20 16:06:11.689 – DOFLinx device:3 FTDI (Sainsmart) setup with 8 outputs
The sainsmart (ports 1-4) is the only thing I have connected to the contactors…. the pinscape is being used for the analog to digital plunger as well as nudging.
Here is the assignments in ini based on the log above
# Device and Ports for the 10 solenoid setup for Flippers, Slingshots, Middle 3 solenoids, Back 3 Solenoids.
LINK_LF=301,50,10000,255
LINK_RF=303,50,10000,255
LINK_LS=301,50,1000,255
LINK_RS=303,50,1000,255
LINK_ML=301,50,1000,255
LINK_MC=301,50,1000,255
LINK_MR=303,50,1000,255
LINK_BL=302,50,1000,255
LINK_BC=302,50,1000,255
LINK_BR=304,50,1000,255
You need to login in order to like this post: click here
Forums are currently locked.
©2024 VPinBall.com