Doflinx questions

[Malinas]

Hello! FX3 Active backglass + DOF questions if someone has the time to check this out and maybe know whats gone wrong ;) 

1. Dof works fine for VPX
2. Doflinx don´t work for Fx3 tables.
   All i get to work, is 1 lamp that are flashing when i use the L/R flippers.

   Pinup popper starts this batch file.

@echo off
c:
cd c:\DirectOutput
start DOFLinx.exe
c:
cd C:\Pinball\Visual Pinball\VPinMAME
start dmdext.exe mirror –source=pinballfx3 –no-virtual
exit

Everything starts up.

And then 1 led, blinks when i use L/R flipper.

 

LOG

20-Jun-19 14:46:34.532 – DOF Linx for Pinball Emulators – DOFLinx by DDH69
20-Jun-19 14:46:34.543 – Starting up – version 6.62
20-Jun-19 14:46:34.549 – For support come and visit the community here http://www.vpforums.org/index.php?showforum=104
20-Jun-19 14:46:34.555 – Pinscape search disabled
20-Jun-19 14:46:34.560 – Pre-Reading DOFLinx.INI startup config file details
20-Jun-19 14:46:34.604 – Parameter data failed for DEBUG with System.IndexOutOfRangeException: Index was outside the bounds of the array.
at DOFLinx.MainForm.TurnDebugOn(Boolean ShowScreen)
at DOFLinx.MainForm.ProcessParameter(String TheParam, String TheData, Boolean Realtime)
20-Jun-19 14:46:37.247 – Shutting down
20-Jun-19 14:46:37.253 – Program close
20-Jun-19 15:41:30.413 – DOF Linx for Pinball Emulators – DOFLinx by DDH69
20-Jun-19 15:41:30.434 – Starting up – version 6.62
20-Jun-19 15:41:30.440 – For support come and visit the community here http://www.vpforums.org/index.php?showforum=104
20-Jun-19 15:41:30.447 – Pre-Reading DOFLinx.INI startup config file details
20-Jun-19 15:41:30.498 – DEBUG enabled with showing of window True
20-Jun-19 15:41:31.622 – Joystick # 1 detected : 4 buttons Z-Axis
20-Jun-19 15:41:31.630 – 0 Pinscape device(s) found
20-Jun-19 15:41:31.635 – 2 LEDWiz device(s) found
20-Jun-19 15:41:31.643 – DOFLinx device: 1 Initializing as LEDWiz #1 with ID=1
20-Jun-19 15:41:31.648 – DOFLinx device:1 LEDWiz setup with 32 outputs
20-Jun-19 15:41:31.652 – DOFLinx device: 2 Initializing as LEDWiz #2 with ID=0
20-Jun-19 15:41:31.658 – DOFLinx device:2 LEDWiz setup with 32 outputs
20-Jun-19 15:41:31.663 – 0 FTDI (Sainsmart) device(s) found
20-Jun-19 15:41:31.668 – 0 PacLED64 device(s) found
20-Jun-19 15:41:31.674 – 0 Ultimate IO device(s) found
20-Jun-19 15:41:31.681 – Reading DOFLinx.INI startup config file details
20-Jun-19 15:41:31.687 – Reading DirectOutputConfig file named C:\DirectOutput\directoutputconfig.ini
20-Jun-19 15:41:31.694 – Turning DEBUG off
20-Jun-19 15:41:31.713 – DEBUG enabled with showing of window True
20-Jun-19 15:41:31.721 – Reading DirectOutputConfig file named C:\DirectOutput\directoutputconfig.ini
20-Jun-19 15:41:31.919 – Error in configuration for Setting IDAddressable trying to set device to 3 Needs to be in the range 1-2
20-Jun-19 15:41:33.624 – 0 Pinscape device(s) found
20-Jun-19 15:41:33.645 – 2 LEDWiz device(s) found
20-Jun-19 15:41:33.666 – DOFLinx device: 1 Initializing as LEDWiz #1 with ID=1
20-Jun-19 15:41:33.688 – DOFLinx device:1 LEDWiz setup with 32 outputs
20-Jun-19 15:41:33.705 – DOFLinx device: 2 Initializing as LEDWiz #2 with ID=0
20-Jun-19 15:41:33.719 – DOFLinx device:2 LEDWiz setup with 32 outputs
20-Jun-19 15:41:33.730 – 0 FTDI (Sainsmart) device(s) found
20-Jun-19 15:41:33.738 – 0 PacLED64 device(s) found
20-Jun-19 15:41:33.745 – 0 Ultimate IO device(s) found
20-Jun-19 15:41:49.347 – Shutting down
20-Jun-19 15:41:49.381 – Program close

 

 

DOFlinx.ini

DEBUG=1
DIRECTOUTPUTCONFIG=c:\DirectOutput\directoutputconfig.ini
PATH_FX2=C:\DirectOutput\FX2\
PATH_FX3=C:\DirectOutput\FX3\
PATH_FX2_B2S=C:\DirectOutput\FX2_B2S\
PATH_FX3_B2S=C:\DirectOutput\FX3_B2S\
PATH_B2S_SERVER=C:\Pinball\Visual Pinball\Tables\
PROCESSES=Pinball FX3,Future Pinball,VPinball_9_9_1,VPPhysMod5
PROCESS_TO_ACTIVE_TIME=1

# Set the key code for the keys being used as Left and Right flippers
# Used for the default fll back if a full link cannot be established
# Left Shift = A0, Right Shift = A1

L_FLIPPER_KEY=A0
R_FLIPPER_KEY=A1

# Just in case things go wrong (ie no keyup signal is detected, flipper held down for a long time), what is the maximum time a flipper solenoid / contactor can be in in milliseconds
MAX_FLIPPER_ON=5000

# Use random colour order for the RGB undercabinet lighting
RGB_STYLE=RANDOM

# Use the flipper key press to to cause undercabinet lighting to change
RGB_TRIGGER=FLIPPER

# The minimum time for change between flipper flips, 1000mS or 1 second
RGB_MIN_TIME=1000

# The red device / port for undercabinet lighting, device #1, port 29
RGB_OUTPUT=129

# Turn on the attempt to make a full connection to Future Pinball when it is detected as running
FP_ATTEMPT_LINK=1

# Set to 1 to output the game name to the log regardless of the DEBUG flag setting. Set to 0 to simply follow the DEBUG flag.
# Quite useful when you trying to get the FX3 window game name for setting game specific colours, matching B2S names, etc
OUTPUT_GAME_NAME=0

# The device / port for the left and right flippers, set to output device 1, left flipper solenoid on port 1 and right flipper solenoid on port 2
L_FLIPPER_OUTPUT=101
R_FLIPPER_OUTPUT=102
LINK_LF=101,50,10000,255
LINK_RF=102,50,10000,255

# The other 8 solenoid of a 10 solenoid setup using ports 4 to 11 inclusive
LINK_LS=103,50,500,255
LINK_RS=104,50,500,255
LINK_ML=105,50,500,255
LINK_MC=106,50,500,255
LINK_MR=107,50,500,255
LINK_BL=108,50,500,255
LINK_BC=119,50,500,255
LINK_BR=111,50,500,255

# Ports for the shaker, gear motor, knocker, beacon and strobe using ports 12 – 16 inclusive
LINK_SH=113,1000,5000,255
LINK_GR=112,750,10000,255
LINK_KN=111,120,500,255
LINK_BK=115,FLASH,200,255
LINK_SR=116,ON,0,255

# Ports for the lights inside the various buttons being Start, Extra Ball, Coin, Exit, Launch Ball and Fire for ports 17 to 22 inclusive
LINK_ST=117
LINK_EB=118
LINK_CN=119
LINK_EX=120
LINK_LB=121
LINK_FR=122

# The device and red ports for five flashers, these have been set in the example below as on the second output device, ie LEDWiz #2
LINK_FLOL=201
LINK_FLIL=204
LINK_FLCN=207
LINK_FLIR=210
LINK_FLOR=213

# Turn on the Exit Button when DOFLinx is activated
BUTTONS_ON=120

# Make the “4” key (key code 34) to pulse controller/output 119
KEY_TO_OUTPUT=34 119

KEY_TO_COLOUR=A2 109 Red A3 109 Red

SETTING_ACTIVATE=A0,A1,A2,A3
SETTING_UP=A0
SETTING_DOWN=A1
SETTING_CHANGE=31
SETTING_EXIT=32
SETTING_MESSAGE=L Flipper = Up, R Flipper = Down, Start = Change, EB = Exit
SETTING=UnderCab,115,Under cabinet lighting disabled,Off,Y,114,150
SETTING=Addressable,119,Addressable LEDs Enabled,On,Y,118,50
SETTING=NIGHT,,Night Mode,Off,Y

GAME_COLOUR=AlienIsolationPinball,Medium_Blue,Lime,Dodger_Blue,Lime_Green
GAME_COLOUR=AlienvsPredatorPinball,Medium_Blue,Lime_Green,Dodger_Blue,Yellow_Green
GAME_COLOUR=AliensPinball,Medium_Blue,Dark_Golden_Rod,Dodger_Blue
GAME_COLOUR=AmericanDadPinball,Medium_Blue,Lime_Green,Dodger_Blue,Yellow_Green
GAME_COLOUR=ArcherPinball,Medium_Blue,Yellow,Dodger_Blue,Blue_Violet
GAME_COLOUR=Biolab,Dark_Red,Lime,Blue,Cyan,Blue_Violet,Yellow
GAME_COLOUR=Blade,Blue,Blue_Violet,Salmon
GAME_COLOUR=BobaFett,Lime,Golden_Rod,Blue_Violet
GAME_COLOUR=BobsBurgersPinball,Medium_Blue,Lime_Green,Dark_Red,Dodger_Blue,Yellow_Green
GAME_COLOUR=CaptainAmerica,Blue,Dark_Red,Dodger_Blue,Gold
GAME_COLOUR=CastleStorm,Blue,Gold,Lime,Dodger_Blue,Orange,Lime_Green
GAME_COLOUR=CivilWar,Blue,Dark_Red,Dodger_Blue,Light_Salmon
GAME_COLOUR=Deadpool,Dark_Red,Blue,Medium_slate_blue,Dodger_Blue
GAME_COLOUR=DoomPinball,Yellow,Silver,Gray,Dark_Orange,Dim_Gray,Orange_Red,Peru,Crimson
GAME_COLOUR=DoctorStrange,Dark_Red,Blue,Gold,Lime_Green,Dark_Violet,Orange,Dodger_Blue,Lime,Medium_Slate_Blue
GAME_COLOUR=EarthDefense,Dark_Red,Blue,Gold,Dark_Violet,Orange,Dodger_Blue,Lime
GAME_COLOUR=ElDorado,Orange,Lime_Green,Yellow,Coral,Lime,Yellow_Green,Cyan
GAME_COLOUR=EpicQuest,Lime_Green,Dodger_Blue,Yellow_Green,Cyan
GAME_COLOUR=Excalibur,Dark_Red,Blue,Lime,Dodger_Blue,Cyan
GAME_COLOUR=FalloutPinball,Crimson,White,Red,Brown,Light_Steel_Blue,Slate_Blue
GAME_COLOUR=FamilyGuyPinball,Dodger_Blue,Lime_Green,Salmon,Dark_Violet,Yellow_Green
GAME_COLOUR=FantasticFour,Blue,Yellow,Dodger_Blue,Orange_Red
GAME_COLOUR=FearItself,Dark_Red,Blue,Yellow,Lime,Dark_Violet,Orange
GAME_COLOUR=GhostRider,Dodger_Blue,White,Yellow,Light_Salmon,Orange_Red
GAME_COLOUR=GuardiansoftheGalaxy,Dodger_Blue,Orange,Medium_Purple
GAME_COLOUR=IRONMAN,Blue,Dark_Red,Dodger_Blue,Gold
GAME_COLOUR=Mars,Blue,Yellow,Deep_sky_blue,Gold
GAME_COLOUR=MarvelsAntMan,Medium_Blue,Dark_Red,Dodger_Blue
GAME_COLOUR=MarvelsAvengersAgeofUltron,Dark_Red,Dodger_Blue,Lime_Green,Light_Salmon,Cyan
GAME_COLOUR=MarvelsTheAvengers,Blue,Dark_Red,Dodger_Blue,Gold
GAME_COLOUR=MarvelsWomenofPowerAForce,Red,Lime,Gold,Slate_Blue,Tomato,Silver,Dark_Orchid,Spring_Green
GAME_COLOUR=MarvelsWomenofPowerChampions,Dodger_Blue,Yellow,Red,Gray,Golden_Rod,Crimson,Orange
GAME_COLOUR=MoonKnight,Dodger_Blue,Blue,Cyan,Royal_Blue
GAME_COLOUR=MsSplosionMan,Dodger_Blue,Pink,Medium_Blue,Purple,Royal_Blue
GAME_COLOUR=Paranormal,Lime_Green,Dodger_Blue,Yellow_Green
GAME_COLOUR=Pasha,Dark_Violet,Golden_Rod,Dodger_Blue
GAME_COLOUR=PlantsVSZombies,Lime_Green,Yellow_Green,Dodger_Blue
GAME_COLOUR=Portal,Dodger_Blue,Yellow_Green,Medium_Blue,Yellow
GAME_COLOUR=Rome,Dark_Red,Gold,Dodger_Blue,Light_Salmon,Yellow_Green,Orange
GAME_COLOUR=SecretsoftheDeep,Blue,Yellow,Dodger_Blue
GAME_COLOUR=Shaman,Dark_Red,Blue,Gold,Dark_Violet,Orange,Dodger_Blue,Lime
GAME_COLOUR=SorcerersLair,Blue,Blue_Violet,Dodger_Blue,Slate_Blue
GAME_COLOUR=SouthParkButtersVeryOwnPinballGame,Dark_Red,Blue,Gold,Dark_Violet,Orange,Dodger_Blue,Lime_Green
GAME_COLOUR=SouthParkSuperSweetPinball,Dark_Red,Lime,Blue,Gold,Dark_Violet,Orange,Dodger_Blue,Lime_Green,Yellow_Green
GAME_COLOUR=SpiderMan,Dark_Red,Lime,Blue,Gold,Dark_Violet,Orange
GAME_COLOUR=STARWARSDARTHVADER,Light_sky_blue,Dark_Red,Cyan
GAME_COLOUR=StarWarsEpisodeVTheEmpireStrikesBack,Medium_Blue,Yellow,Dark_Red,Dodger_Blue
GAME_COLOUR=StarWarsEpisodeVIReturnoftheJedi,Slate_Blue,Golden_Rod,Medium_Blue,Lime_Green,Dodger_Blue,Yellow
GAME_COLOUR=StarWarsPinballDroids,Medium_Blue,Yellow,Orange,Navy,Gold,Orange_Red
GAME_COLOUR=StarWarsPinballEpisodeIVANewHope,Cyan,Golden_Rod,Dodger_Blue,Yellow
GAME_COLOUR=StarWarsPinballHanSolo,Dodger_Blue,Royal_Blue,Antique_White
GAME_COLOUR=StarWarsPinballMastersoftheForce,Medium_Blue,Salmon,Dodger_Blue,Purple,Cyan,Dark_Red
GAME_COLOUR=StarWarsPinballMightoftheFirstOrder,Light_sky_blue,Dodger_Blue,Dark_Red,Cyan
GAME_COLOUR=StarWarsPinballStarWarsRebels,Medium_Blue,Yellow,Royal_Blue,Orange_Red,Purple,Lime_Green
GAME_COLOUR=StarWarsPinballTheForceAwakens,Dark_Red,Medium_Blue,Blue_Violet
GAME_COLOUR=StarWarsPinballRogueOne,Gray,Silver,Light_Sky_Blue,Teal,Beige,Bisque,Aqua_Marine,Slate_Gray,Dark_Orange
GAME_COLOUR=StarWarsStarfighterAssault,Medium_Blue,Dodger_Blue,Dark_Red
GAME_COLOUR=StarWarsTheCloneWars,Dark_Red,Pink,Medium_Blue,Medium_Turquoise,Lime,Lime_Green
GAME_COLOUR=SuperLeagueASRoma,Lime_Green,Orange,Lime,Yellow,Red
GAME_COLOUR=SuperLeagueZenStudiosFC,Lime_Green,Orange,Lime,Yellow,Red
GAME_COLOUR=SuperLeagueArsenalFC,Lime_Green,Orange,Lime,Yellow,Red
GAME_COLOUR=SuperLeagueLiverpoolFC,Lime_Green,Orange,Lime,Yellow,Red
GAME_COLOUR=SuperLeagueJuventus,Lime_Green,Orange,Lime,Yellow,Red
GAME_COLOUR=SuperLeagueACMilan,Lime_Green,Orange,Lime,Yellow,Red
GAME_COLOUR=SuperLeagueRealMadridCF,Lime_Green,Medium_Blue,Lime,Yellow,Red
GAME_COLOUR=SuperLeagueFCBarcelona,Slate_Blue,Lime_Green,Yellow,Blue_Violet,Lime,Red
GAME_COLOUR=Tesla,Lime_Green,Yellow_Green,Dodger_Blue,Golden_Rod
GAME_COLOUR=TheElderScrollsVSkyrimPinball,Light_Slate_Gray,Gold,Golden_Rod,Dark_Sea_Green,Peru,Tan
GAME_COLOUR=TheInfinity Gauntlet,Dark_Red,Blue,Gold,Dark_Violet,Orange,Dodger_Blue,Lime
GAME_COLOUR=TheWalkingDead,Lime_Green,Royal_Blue,Yellow_Green
GAME_COLOUR=Thor,Dark_Red,Blue,Gold,Dark_Violet,Orange,Dodger_Blue,Lime
GAME_COLOUR=V12,Dark_Red,Blue,Gold,Dark_Violet,Orange,Dodger_Blue
GAME_COLOUR=Venom,Dark_Red,Blue,Dark_Violet,Dodger_Blue
GAME_COLOUR=WildWestRampage,Yellow_Green,Dodger_Blue,Royal_Blue
GAME_COLOUR=Wolverine,Dark_Red,Medium_Blue,Yellow,Dark_Violet
GAME_COLOUR=WorldWarHulk,Lime_Green,Yellow_Green,Dodger_Blue,Lime,Yellow
GAME_COLOUR=XMen,Blue,Blue_Violet,Gold,Dodger_Blue,Slate_Blue,Orange
GAME_COLOUR=ET,Yellow,Amber,Sky_blue,Sienna,Aqua_marine,Slate_gray,Dark_olive_green
GAME_COLOUR=BacktotheFuture,Light_steel_blue,White,Crimson,Gray,Teal,Yellow,Dodger_blue
GAME_COLOUR=Jaws,Dark_turquoise,Gray,White,Salmon,Light_coral,Tan,Papaya_whip,Peru
GAME_COLOUR=SonofZeus,Dark_orange,Silver,Dark_salmon,Amber,Sienna,Light_steel_blue,Firebrick
GAME_COLOUR=AdventureLand,Red,Cyan,Yellow,White,Medium_orchid,Aqua,Dark_turquoise,Medium_purple
GAME_COLOUR=JurassicPark,Lawn_green,Amber,Yellow,Light_slate_gray,Cadet_blue,Black,Rosy_brown,Light_steel_blue,Medium_sea_green,Silver
GAME_COLOUR=JurassicWorld,Light_steel_blue,Silver,Tan,Forest_green,Gray,Cadet_blue,Yellow_green,Teal,Bisque
GAME_COLOUR=JurassicMayhem,Sandy_brown,Forest_green,Dark_green,Dark_olive_green,Dark_khaki,Peru,Tan,Navajo_white,Beige,Dark_golden_rod,Corn_silk
GAME_COLOUR=StarWarsLastJedi,Gold,Orange_Red,Aqua,Coral,Dark_Khaki,Light_Steel_Blue,Yellow_Green,Steel_Blue
GAME_COLOUR=StarWarsAhchToIsland,Peru,Tan,Light_Slate_Gray,Light_Golden_Rod,Turquoise,Deep_Sky_Blue,Spring_Green,Steel_Blue
GAME_COLOUR=WMSFishTales,Forest_green,Medium_spring_green,Pale_green,Aqua,Blue,Golden_Rod,Dark_turquoise,Gold,Deep_sky_blue,Sandy_brown,Green
GAME_COLOUR=WMSGetaway,Red,Steel_blue,Dim_gray,Navy,Dark_red,Teal
GAME_COLOUR=WMSJunkyard,Amber,Lawn_green,Burly_wood,Orange,Peru,Dark_turquoise
GAME_COLOUR=WMSMedievalMadness,Yellow,Amber,Rosy_brown,Firebrick,Forest_green,Gray,Dark_salmon,Dark_orange
GAME_COLOUR=WMSAFM,White,Red,Lime,Amber,Sea_green,Forest_green,Turquoise,Corn_silk
GAME_COLOUR=WMSBlackRose,Khaki,Sky_blue,Orange_red,Gold,Aqua_marine,Tomato,Yellow_green
GAME_COLOUR=WMSPartyZone,Lime,Blue_violet,Orange,Purple,Aqua,Red,Medium_blue,Amber,Yellow,Sandy_brown,Deep_pink

Setup:
DOF Linx V6.81A
Zebs EZ install Deluxe kit with LEDWiz, Shaker, Knocker, Solenoids
VPX 10.6 (3696 build)
PinupSystem 1.4.3 (Vlc 2.2.8 integrated)
Freezy 1.7.3 32bit
Vpinmame 3.2 Beta (Sambuild R4802)
B2S Server (Activate Plugins activated) 1.3.0.3

You need to login in order to like this post: click here

[Mike DA Spike]

It is stated in your logfile : Error in configuration for Setting IDAddressable trying to set device to 3 Needs to be in the range 1-2

Think you need to adjust your DOFlinx.ini

Does all your lights and toys matches the numbers in the ini?

You need to login in order to like this post: click here

[outhere]

Per your log you are on 6.62

Try DOFLinx 6.81A

https://www.vpforums.org/index.php?app=downloads&showfile=12318

DOFLinx V6.81A.zip

You need to login in order to like this post: click here

[outhere]

The best place to ask about the DOFLinx is on vpforums where the creator is located

Are you running DOFLinx as administrator?

You need to login in order to like this post: click here

[Malinas]

Hi @Mike da Spike! Yes Error in configuration for Setting IDAddressable trying to set device to 3 Needs to be in the range 1-2
I have seen that, but i don´t have a clue in what to do.  I just don´t know what to change since this is my first week with DOF.

And, yes i have all the toys.

@outhere Hmm, that was very strange cause i installed the new one, 6.81A per stated in my setup. But i will try to re-install now with this again.

Ok, no i am “for sure” running 6.81A.
It all loads up, but in one spot it says, NO DOF GLOBAL CONFIG FILE SUPPLIED.
I have checked in all Terry Red´s inis, after this setting but can´t find it. If this now needs, the global config.xml, i don´t know ; /

You need to login in order to like this post: click here

[Malinas]

Alright! Now, all the lights starts to work correctly and also the Active backglass are showing up! So something happend after re-installment. Thanks for that!

The shaker works as well! But NOT the solenoids.
I use this https://shop.zebsboards.com/EZInstall/EZInstall-Kit

I don´t know if that are saying you something, but had to try ;)
I guess this is needed to put in somewhere in a file for them to work/start.

Thank you for all your help!

You need to login in order to like this post: click here

[outhere]

Go in clear the log and re-post the log

You need to login in order to like this post: click here

[Malinas]

It says 6.81, but i installed the A version.
lights – shaker works, not the rest.

26-Jun-19 15:59:43.259 – DOF Linx for Pinball Emulators – DOFLinx by DDH69
26-Jun-19 15:59:43.269 – Starting up – version 6.81
26-Jun-19 15:59:43.274 – For support come and visit the community here http://www.vpforums.org/index.php?showforum=104
26-Jun-19 15:59:43.281 – Pre-Reading DOFLinx.INI startup config file details
26-Jun-19 15:59:43.331 – DEBUG enabled with showing of window True
26-Jun-19 15:59:43.351 – No DOF Global Config file supplied
26-Jun-19 15:59:43.470 – 0 Pinscape device(s) found
26-Jun-19 15:59:43.526 – 2 LEDWiz device(s) found
26-Jun-19 15:59:43.532 – DOFLinx device: 1 Initializing as LEDWiz #1 with ID=1
26-Jun-19 15:59:43.542 – DOFLinx device:1 LEDWiz setup with 32 outputs
26-Jun-19 15:59:43.547 – DOFLinx device: 2 Initializing as LEDWiz #2 with ID=0
26-Jun-19 15:59:43.553 – DOFLinx device:2 LEDWiz setup with 32 outputs
26-Jun-19 15:59:43.559 – 0 FTDI (Sainsmart) device(s) found
26-Jun-19 15:59:43.567 – 0 PacLED64 device(s) found
26-Jun-19 15:59:43.573 – 0 Ultimate IO device(s) found
26-Jun-19 15:59:43.585 – Reading DOFLinx.INI startup config file details
26-Jun-19 15:59:43.590 – Turning DEBUG off
26-Jun-19 15:59:43.613 – DEBUG enabled with showing of window True
26-Jun-19 15:59:43.622 – Reading DirectOutputConfig file named c:\DirectOutput\config\directoutputconfig.ini
26-Jun-19 15:59:45.353 – 0 Pinscape device(s) found
26-Jun-19 15:59:45.370 – 2 LEDWiz device(s) found
26-Jun-19 15:59:45.390 – DOFLinx device: 1 Initializing as LEDWiz #1 with ID=1
26-Jun-19 15:59:45.411 – DOFLinx device:1 LEDWiz setup with 32 outputs
26-Jun-19 15:59:45.432 – DOFLinx device: 2 Initializing as LEDWiz #2 with ID=0
26-Jun-19 15:59:45.447 – DOFLinx device:2 LEDWiz setup with 32 outputs
26-Jun-19 15:59:45.460 – 0 FTDI (Sainsmart) device(s) found
26-Jun-19 15:59:45.469 – 0 PacLED64 device(s) found
26-Jun-19 15:59:45.476 – 0 Ultimate IO device(s) found

You need to login in order to like this post: click here

[outhere]

Do you have this file in your DirectOutput or Config folder?
GlobalConfig_B2SServer.xml

You need to login in order to like this post: click here

[Malinas]

Yes! But…. wow i just noticed that the Solenoids are not working in VPX either.. so there we have the problem.

And can´t get them to work again.

I start this batch before starting table.

SET PORT=COM4

mode %PORT%:BAUD=9600 PARITY=N DATA=8 STOP=1 DTR=on RTS=on
set /p x=”RON” <nul>\\.\%PORT%

 

but they just don´t start to live again, ;/ this will never ends for me….   ;/

You need to login in order to like this post: click here

[outhere]

It says 6.81, but i installed the A version. — Mine is the same way so you’re good

What folder is this file in? –> GlobalConfig_B2SServer.xml

Post this file – GlobalConfig_B2SServer.xml
Post your DirectOutput.log

You need to login in order to like this post: click here

[Malinas]

You always try to help me out, i appreciate that very much. Let me know if i can do anything for you back?

I will send this when im back home again on the VP.

You need to login in order to like this post: click here

[mon72]

Hi Malinas

Did you solve the problem with Adressable LEDs in FX3?

br

mon72

You need to login in order to like this post: click here

[Author]

Posts