No more backglass ,/ (SOLVED)

[Malinas]

Whats going on?

Suddenly no backglasses is showing up no matter what i do.
Have the correct settings in Screenres.txt for the backglass.

– It is not a (b2s.server) vpx script issue since NO backglass at all shows up.
– Tried from both vpx and popper.
– Yes, looked into the threads regarding this but nothing solves this.

Have 1 Playfield 2 Backglass and 3 Topper and the STRANGE thing is that backglass CAN be shown on Playfield and in Topper screen upon experimenting with Screenres.txt, but NOT where it supposed to show, BACKGLASS. ;/

Any idéas pinball friends?

Whats running?
VPX 10.6 (3696 build)
PinupSystem 1.4.3 (Vlc 2.2.8 integrated)
Freezy 1.7.1 32bit
Vpinmame 3.2 Beta (Sambuild R4816)
B2S Server (Activate Plugins activated) 1.3.0.3

You need to login in order to like this post: click here

[outhere]

Re-boot

You need to login in order to like this post: click here

[Herweh]

Is the backglass monitor switched off or in standby?

You need to login in order to like this post: click here

[newtopinball78]

This happens to me sometimes or other weird issues with vpx…..like outhere said reboot….that solves a lot of issues

You need to login in order to like this post: click here

[Malinas]

Thanks for reply!

@outhere Have rebooted several times since i notice this at first, still same issue.

@Herweh It is on all the time, not on standby it turns on when i start the vp.

@newtopinball78 oh… never experienced this actually.. ;/

Where should i start to troubleshoot here you think guys?

You need to login in order to like this post: click here

[newtopinball78]

Maybe you already checked this but just a suggestion from another post:

In your settings under preferences then keys/nudge/dof  on the right hand side check to make sure the “disable B2S” is not checked  if it is checked then uncheck and start VP again.  After that I don’t know much about controller.vbs but if you open the script there is some reading and explanation about what it does, but might be the source of your issue

You need to login in order to like this post: click here

[outhere]

I would start by on plugging  the topper

You need to login in order to like this post: click here

[Badazzwi]

Check the display settings in windows and graphics card settings. Maybe something got screwed up there.

Does the monitor display anything at all? Is it getting a video signal?

Hi my name is Barry and I'm a virtual pinball addict.

You need to login in order to like this post: click here

[JR]

How frustrating!!  I would start the troubleshoot with what Herweh was suggesting.  Somehow make sure the monitor is functional.  Get that hdmi cable hooked up to something else.  While I’m sure this is not your problem, when I was a week into setting up PBX I went into the settings to make some adjustments and hit the scroll wheel on my mouse unintentionally and it made some weird change that took me another week to figure out.  Hope you’ve got it figured out.

You need to login in order to like this post: click here

[Malinas]

Thanks for all the feedback! I tried it all, but the problem was that Nvidia had updated my graphig drivers, so i went back some versions and then the Backglass worked again. So i guess its bad that Nvidia update sometimes, it interfere with the system. ,/

You need to login in order to like this post: click here

[Highspeedlover]

Today I encountered the same problem, without doing anything to the system. Let’s see it I also received a new Nvidia driver

 

You need to login in order to like this post: click here

[Author]

Posts