- This topic has 2 replies, 2 voices, and was last updated 5 years, 8 months ago by .
Viewing 3 posts - 1 through 3 (of 3 total)
Viewing 3 posts - 1 through 3 (of 3 total)
RELUCTANTLY enabled site for everyone to view for historical reference only. Downloads area not publicly available.
Looking for a low-key way to add some flasher action. Complete newb regarding these addressable led strips but could they act as flashers?
Say I had a strip with 21 LEDs on it. Could I do this..
First 3 leds – strobe
next 3 – flasher 1
next 3 – flasher 2
next 3 – flasher 3
next 3 -flasher 4
next 3 – flasher 5
last 3 – strobe
You need to login in order to like this post: click here
Addressable Leds already emulate the 5 RGB Flashers, Strobe, and Beacon….all on the Back Matrix. You can have a single strip for the left side MX, back MX, and right MX side….or your Back MX can have multiple rows to make a low-res screen. DOF will scale all the effects to whatever setup you have.
You need to login in order to like this post: click here
Ok I found the thread for setting these up. Thanks for letting me know it was possible.
You need to login in order to like this post: click here
Forums are currently locked.
©2024 VPinBall.com