Currently, there are 0 users and 0 guests visiting this topic.
Viewing 20 posts - 1 through 20 (of 21 total)
  • Author
    Posts
  • #70662
    Kalavera3
    Participant
    @kalavera3
    Member

    thanks to Sliderpoint and Xenonph for allowing me to modify his incredible NFL table.

    thanks to Sliderpoint for his model of goalkeeper, really stayed perfect!

    JPSalas for his huge help with the goalkeeper, without him he wouldn't cut a ball thanks!

    32assassins for the 3D modeling of the ramps and for debugging the code.

    This table is one of my favorites, the first stern design after acquiring the division of sega pinballs and it is believed that this design was inherited from that company. the version that had been quite old and with graphics in low resolution, the playfield recreates it by parts, since I could not find a good quality photo to do it, the script is the same as the one that had the Sliderpoint and Xenonph table, with some small changes, like the lights.

    I hope you like it.

    #70665
    Thalamus
    Moderator
    @thalamus
    ContributorMemberModerator

    Got a stuck ball and I noticed that the pin in between the flippers doesn’t have the normal white rubber. The tip is, rubber24 has a image ;)

     

    Attachments:
    1 user thanked author for this post.
    #70667
    Kalavera3
    Participant
    @kalavera3
    Member

    ooopps and I start reviewing thanks thalamus.

    #70671
    Kalavera3
    Participant
    @kalavera3
    Member

    ooopps and I start reviewing thanks thalamus.

    fix thxs! :mail:

    #70672
    Juanlo
    Participant
    @vacamiel

    Buen trabajo hincha de boca :yahoo:

    1 user thanked author for this post.
    #70693
    STAT
    Participant
    @stefanaustria
    MemberContributor

    Thank you Kalavera, and thanks again Xenon and Sliderpoint

    2 users thanked author for this post.
    #70713
    Micronaut
    Participant
    @micronaut
    Member

    thank you,i not know this table,but it`s like it

    #70718
    marie
    Participant
    @marie
    Member

    Che, thanks. Feels almost like la Bombonera ;)

    #70929
    Mark70
    Participant
    @mark70
    Member

    Thanks for the table, everyone involved!

    If someone is looking for the german ROM, it is this one: http://www.vpforums.org/index.php?app=downloads&showfile=1101

     

     

    2 users thanked author for this post.
    #71395
    Sven34
    Participant
    @sven34
    Member

    Thanks Kalavera3 for Strike Xtreme Pinball  :good:

    #88771
    randr
    Keymaster
    @randr
    ModeratorMember

    Thanks for the update!

    ********************************************************
    Messing with the VPinball app and push notifications.
    So if you haven't downloaded app yet what are you waiting for!?
    for IOS and Android

    ********************************************************

    #145122
    STAT
    Participant
    @stefanaustria
    MemberContributor

    Update sounds good – thanks Man  :good:  … some Games at the evening for sure B-)

    1 user thanked author for this post.
    #145125
    thrillseeker
    Participant
    @thrillseeker

    thanx for the effort you guys….apppreciated!

    #145132
    Rajo Joey
    Participant
    @joey2001
    Member

    Thanks for the update. :good:

    #145136
    naeromagus
    Participant
    @naeromagus
    Member

    Thanks can’t wait to try!

    #145137
    Thalamus
    Moderator
    @thalamus
    ContributorMemberModerator

    Thanks for the update. JPSalas, 32a and of course to you Christian.

    #145139
    Bob Albright
    Participant
    @bobalbright
    Member

    Thanks!

    "And in the end, the love you take is equal to the love you make"

    #145366
    digable
    Participant
    @digable

    My flippers are sticking any suggestions on what could be going on?  I’m using 10.6.  Thanks in advance.

    #145371
    Kalavera3
    Participant
    @kalavera3
    Member

    the flippers don’t work? if so in the script on line 9 change UseSolenoids=2 to UseSolenoids=1

    #145377
    Thalamus
    Moderator
    @thalamus
    ContributorMemberModerator

    Sticking flippers can also be that your run the rom for the first time. Always, if you haven’t played the table before. Start it, exit, and restart before searching elsewhere. Also, sticky flippers can also be a sign that you should check your db2s. If the flippers are not working at all and you’re on 10.6, well, then I would say, you have some stray *.vbs files that prevents you from getting this functionality. Needing to change useSolenoids=1, is just a clear sign that something is wrong if you run 10.6.

Viewing 20 posts - 1 through 20 (of 21 total)
  • You must be logged in to reply to this topic.

©2020 VPinBall.com

Log in with your credentials

or    

Forgot your details?

Create Account

The Vpinball app

FREE
VIEW