- This topic has 1 reply, 1 voice, and was last updated 3 years, 9 months ago by .
Viewing 2 posts - 1 through 2 (of 2 total)
Viewing 2 posts - 1 through 2 (of 2 total)
RELUCTANTLY enabled site for everyone to view for historical reference only. Downloads area not publicly available.
I’m building a cab with VPX/pinballY/zebs plunger. Everything works great with keyboard input, but if I plug in zebs plunger board and start a table, it hangs right before the ROM starts. If i unplug zeb’s board from USB, the ROM beeps and the table starts. I can then plug zeb’s plunger board back in and the cabinet controls work fine. The table just won’t start if zeb’s board is plugged in. I have tried other USB ports, I’ve tried removing the normal keyboard (there’s no other USB devices), I’ve checked that there aren’t any buttons “stuck”. Any ideas on what could be causing this?
You need to login in order to like this post: click here
I got it working, I had to specify a different COM port in dmddevice.ini
You need to login in order to like this post: click here
Forums are currently locked.
©2024 VPinBall.com