- This topic has 7 replies, 2 voices, and was last updated 4 years, 11 months ago by
.
-
Posts
-
Please help out! ;)
I have some issues with my DOF config.
And don´t know where to begin.When dof triggers multiple toys my solenoids has started to turn off for some seconds.
JUST AN EXAMPLE of many.. In a game where gear and beacon is used, and then the shaker starts to shake, FLIPPER solenoids turn OFF for some seconds. Until the Shaker has stopped.
I also experienced this when different combos with toys running at the same time.
So, do i have to much toys?
Do i need to buy a better Power Supply?
In that case, what is the best one for this setup?What do dooooo ;)
I use:
Power supply
https://www.amazon.co.uk/gp/product/B07L64S2BM/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1with Zebsboards LEDWiz compatible controlled Booster
10 Solenoids
https://www.summitracing.com/int/parts/acc-40200/overview/?rrec=true2 Beacons (Regular)
2 Flashers (White)
2 Flashers (Police lights)
https://www.amazon.co.uk/gp/product/B0774JHSYT/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=14 Undercab (Flashers)
https://www.amazon.co.uk/gp/product/B07QXMXZ1N/ref=ppx_yo_dt_b_asin_title_o05_s01?ie=UTF8&psc=14 (Flashers for Backglass)
https://www.amazon.co.uk/gp/product/B07JG1RQMB/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=12 Undercab (Led-strip)
2 Gears
https://www.amazon.co.uk/gp/product/B07FZZS5BQ/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1and
4 Solenoids (For triggering of bells)
https://www.amazon.co.uk/gp/product/B01EJ800QW/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
1 DeLorean (with 6 led lights)
https://www.amazon.co.uk/Back-Future-Part-II-DeLorean/dp/B001UFQNF0/ref=sr_1_1?keywords=Back+to+the+Future+Part+II+1%3A15+Scale+DeLorean+Model+Car&qid=1569921736&s=gateway&sr=8-112 Led lights runned on DOF (For buttons)
You need to login in order to like this post: click here
Will this solve this problem perhaps?
600W, 50A
https://www.amazon.co.uk/gp/product/B072M7P7QJ/ref=ox_sc_act_title_3?smid=AQKQE90U3KQMV&psc=1
You need to login in order to like this post: click here
Have you tried disconnecting the power to to the gear and Beacon and see if it does the same thing
Another words let the hardware still think it’s there just disconnect the power from the item
You need to login in order to like this post: click here
Thanks! I unplugged the gear and now the problem is gone ,now everything is normal except that if i plug in the gear again it probably be the same…
well then i go for upgrading the Power supply to 600w instead of 320w, right?
You need to login in order to like this post: click here
You Have Diodes on The hardware like the shaker, the gear motor and solenoid
You need to login in order to like this post: click here
I would do more testing before you spend money on other power supply
What happens if you hook the gear motor backup and you disconnect other items
You need to login in order to like this post: click here
When shaker is off and gear is on the solenoids Do the same thing :/ they go off for while , so this means that the gear is power consuming ,.. But the 600w supply should solve it all right? It is very cheep so no worries , thanks for careing though :)
You need to login in order to like this post: click here
Try the stronger power supply – The worst to can do is not help
Or It sounds like you Have a hardware problem either the gear motor or Zeb
You Have Diodes on The hardware like the shaker, the gear motor and solenoid?
In your hardware/Software is there some kind of a safety thing put in so if you’re pulling too much amperage it shut something else off?
You need to login in order to like this post: click here
Forums are currently locked.
