chicagobears1977's Replies

Forum Replies Created

Viewing 20 posts - 1 through 20 (of 33 total)

1 2 →

Author

Posts
September 17, 2020 at 5:22 pm in reply to: Led brightness adjustment #201377
chicagobears1977
Participant
@chicagobears1977
Ok thanks for your help.

You need to login in order to like this post: click here
September 17, 2020 at 5:09 pm in reply to: Led brightness adjustment #201373
chicagobears1977
Participant
@chicagobears1977
Thanks.

is there a specific one for left and right or does it adjust the whole strip?

You need to login in order to like this post: click here
September 12, 2020 at 10:42 pm in reply to: DOFLinx not working in FP #200791
chicagobears1977
Participant
@chicagobears1977
I downloaded the tables that have DOFLinx in the title. That was all.

Can you share your your directoutput shapes png and xml for the 8 height?

You need to login in order to like this post: click here
September 12, 2020 at 7:02 pm in reply to: DOFLinx not working in FP #200778
chicagobears1977
Participant
@chicagobears1977
Thanks Terry. I was under the impression that the ultimate pros do. I have them working perfect now.

You need to login in order to like this post: click here
September 10, 2020 at 7:58 pm in reply to: Best table to test LEDs and Matrix? #200543
chicagobears1977
Participant
@chicagobears1977
Mike DA Spike wrote:

For texts on the matrix I used “The Getaway: High Speed II”. I have a 48×8 matrix and noticed that the texts where not showing fine. The font that is used is 7 pixels height, so make sense that on a 8 leds height it didnt show fine. It looks like it has some shadows. I modified the DirectOutputShapes.png and directoutputshapes.xml to a 8 fonts height Original files (see the extra not completly filled leds)

Does anyone know how to change to a 8 font height? I have the exact same issue.

Mike,

Can you share your files?

Thanks
Attachments:
1. IMG_3235-scaled.jpg
You need to login in order to like this post: click here
September 8, 2020 at 9:14 pm in reply to: Teensy dof not responding #200337
chicagobears1977
Participant
@chicagobears1977
Thanks for your help outhere. I appreciate the time to help me. I finally got the whole setup working. I had to reload the hex file so the cabinet xml would load. For anyone needing help it was the Alpha 101 hex file.

Thanks again.

Chicagobears1977

You need to login in order to like this post: click here
September 8, 2020 at 7:02 pm in reply to: Teensy dof not responding #200328
chicagobears1977
Participant
@chicagobears1977
ok im getting this nowDirectOutput Version 3.1.7527.20768, built 2020.08.10 11:32
MJR Grander Unified DOF R3++ edition feat. Djrobx, Rambo3, and Freezy
DOF created by SwissLizard | https://github.com/mjrgh/DirectOutput
2020.09.08 19:00:12.113 DirectOutput Logger initialized
2020.09.08 19:00:12.081 Global config filename is “C:\DIRECTOUTPUT\config\GlobalConfig_B2SServer.xml”
2020.09.08 19:00:12.113 Global config loaded from: C:\DIRECTOUTPUT\config\GlobalConfig_B2SServer.xml
2020.09.08 19:00:12.114 Loading Pinball parts
2020.09.08 19:00:12.114 Loading cabinet
2020.09.08 19:00:12.115 Will load cabinet config file: C:\DirectOutput\Config\cabinet.xml
2020.09.08 19:00:12.439 EXCEPTION: Could not load cabinet config from XML data.
2020.09.08 19:00:12.439 EXCEPTION: Thread:
2020.09.08 19:00:12.439 EXCEPTION: Message: Exception –> Could not deserialize the cabinet config from XML data.
2020.09.08 19:00:12.439 EXCEPTION: A exception occured when loading cabinet config file: C:\DirectOutput\Config\cabinet.xml
2020.09.08 19:00:12.439 EXCEPTION: Thread:
2020.09.08 19:00:12.439 EXCEPTION: Message: NullReferenceException –> Object reference not set to an instance of an object.
2020.09.08 19:00:12.440 EXCEPTION: Stacktrace: at DirectOutput.Log.Exception(String Message, Exception E)
2020.09.08 19:00:12.440 EXCEPTION: Stacktrace: at DirectOutput.Cab.Cabinet.GetCabinetFromConfigXml(String ConfigXml)
2020.09.08 19:00:12.440 EXCEPTION: Stacktrace: at DirectOutput.Cab.Cabinet.GetCabinetFromConfigXmlFile(String FileName)
2020.09.08 19:00:12.440 EXCEPTION: Stacktrace: at DirectOutput.Cab.Cabinet.GetCabinetFromConfigXmlFile(FileInfo CabinetConfigFile)
2020.09.08 19:00:12.440 EXCEPTION: Stacktrace: at DirectOutput.Pinball.Setup(String GlobalConfigFilename, String TableFilename, String RomName)
2020.09.08 19:00:12.440 EXCEPTION: Targetsite: Void Exception(System.String, System.Exception)
2020.09.08 19:00:12.440 No cabinet config file loaded. Will use AutoConfig.
2020.09.08 19:00:12.441 Cabinet auto configuration started
2020.09.08 19:00:12.536 Detected and added PacLed64 Id 1 with name PacLed64 1
2020.09.08 19:00:12.538 Added LedwizEquivalent Nr. 20 with name PacLed64 1 Equivalent 1 for PacLed64 with Id 1
2020.09.08 19:00:12.542 PacDriveSingleton.PacUIOGetIdList: i=0, numdevices=1, DeviceType=PacLED64
2020.09.08 19:00:12.545 PhilipsHueAutoConfigurator.AutoConfig started…note, actual connection detection will happen asynchronously, and device disabled if not succesfull (check further down in the log)
2020.09.08 19:00:12.556 LedWiz-like device at VID=26881, PID=4644, product string=<not available>, manufacturer string=<not available>
2020.09.08 19:00:12.559 LedWiz-like device at VID=121, PID=6, product string=Generic USB Joystick , manufacturer string=DragonRise Inc.
2020.09.08 19:00:12.559 LedWiz-like device at VID=26881, PID=4644, product string=<not available>, manufacturer string=<not available>
2020.09.08 19:00:12.560 LedWiz-like device at VID=53769, PID=5121, product string=Ultimarc, manufacturer string=Ultimarc
2020.09.08 19:00:12.567 Cabinet auto configuration finished
2020.09.08 19:00:12.567 Cabinet loaded
2020.09.08 19:00:12.567 Loading table config
2020.09.08 19:00:12.568 Warning: No table config file found. Will try to load config from LedControl file(s).
2020.09.08 19:00:12.568 Will try to load configs from DirectOutput.ini or LedControl.ini file(s) for RomName tom_14hb
2020.09.08 19:00:12.570 Loading LedControl file C:\DirectOutput\Config\directoutputconfig20.ini
2020.09.08 19:00:12.583 Min DOF Version is 0.8 for file directoutputconfig20.ini
2020.09.08 19:00:12.583 Resolving Tables Variables
2020.09.08 19:00:12.584 Resolving Global Variables
2020.09.08 19:00:13.080 Loading LedControl file C:\DirectOutput\Config\directoutputconfig30.ini
2020.09.08 19:00:13.091 Min DOF Version is 0.8 for file directoutputconfig30.ini
2020.09.08 19:00:13.091 Resolving Tables Variables
2020.09.08 19:00:13.092 Resolving Global Variables
2020.09.08 19:00:14.195 2 directoutputconfig.ini or ledcontrol.ini files loaded.
2020.09.08 19:00:14.198 Config for RomName tom_14hb exists in LedControl data. Updating cabinet and config.
2020.09.08 19:00:14.217 Table config loading finished: romname=tom_14hb, tablename=Theatre of Magic (Bally 1995) 2.0
2020.09.08 19:00:14.218 Pinball parts loaded
2020.09.08 19:00:14.218 Starting processes
2020.09.08 19:00:14.218 Initializing cabinet
2020.09.08 19:00:14.218 Debug: Initializing output controllers
2020.09.08 19:00:14.220 PacLed64 Id:1 initialized and updater thread started.
2020.09.08 19:00:14.220 Debug: Output controllers initialized
2020.09.08 19:00:14.223 Cabinet initialized
2020.09.08 19:00:14.225 Loading shape definition file: C:\DirectOutput\Config\DirectOutputShapes.xml
2020.09.08 19:00:14.256 Framework initialized.
2020.09.08 19:00:14.256 Have fun! :)
2020.09.08 19:00:41.627 Finishing framework
2020.09.08 19:00:41.628 Finishing cabinet
2020.09.08 19:00:41.629 Debug: Finishing output controllers
2020.09.08 19:00:42.844 PacLed64 Id:1 finished and updater thread stopped.
2020.09.08 19:00:42.844 Debug: Output controllers finished
2020.09.08 19:00:42.844 Cabinet finished
2020.09.08 19:00:42.844 DirectOutput framework finished.
2020.09.08 19:00:42.844 Bye and thanks for using!

You need to login in order to like this post: click here
September 8, 2020 at 6:46 pm in reply to: Teensy dof not responding #200326
chicagobears1977
Participant
@chicagobears1977
ok done but the config file is not generating

You need to login in order to like this post: click here
September 8, 2020 at 6:37 pm in reply to: Teensy dof not responding #200324
chicagobears1977
Participant
@chicagobears1977
im testing with theater of magic but for some reason the output log file wont generate. how do i stop linx from running?

You need to login in order to like this post: click here
September 8, 2020 at 6:29 pm in reply to: Teensy dof not responding #200322
chicagobears1977
Participant
@chicagobears1977
and i get this

irectOutput Version 3.1.7527.20768, built 2020.08.10 11:32
MJR Grander Unified DOF R3++ edition feat. Djrobx, Rambo3, and Freezy
DOF created by SwissLizard | https://github.com/mjrgh/DirectOutput
2020.09.08 18:27:28.870 DirectOutput Logger initialized
2020.09.08 18:27:28.851 Finishing framework
2020.09.08 18:27:28.853 Finishing cabinet
2020.09.08 18:27:28.853 Debug: Finishing output controllers
2020.09.08 18:27:28.853 Debug: Output controllers finished
2020.09.08 18:27:28.853 Cabinet finished
2020.09.08 18:27:28.853 DirectOutput framework finished.
2020.09.08 18:27:28.853 Bye and thanks for using!
2020.09.08 18:27:28.855 Global config filename is “C:\DirectOutput\config\GlobalConfig_b2SServer.xml”
2020.09.08 18:27:28.870 Global config loaded from: C:\DirectOutput\config\GlobalConfig_b2SServer.xml
2020.09.08 18:27:28.870 Loading Pinball parts
2020.09.08 18:27:28.870 Loading cabinet
2020.09.08 18:27:28.871 Will load cabinet config file: C:\DirectOutput\Config\cabinet.xml
2020.09.08 18:27:29.204 EXCEPTION: Could not load cabinet config from XML data.
2020.09.08 18:27:29.204 EXCEPTION: Thread:
2020.09.08 18:27:29.204 EXCEPTION: Message: Exception –> Could not deserialize the cabinet config from XML data.
2020.09.08 18:27:29.204 EXCEPTION: A exception occured when loading cabinet config file: C:\DirectOutput\Config\cabinet.xml
2020.09.08 18:27:29.204 EXCEPTION: Thread:
2020.09.08 18:27:29.204 EXCEPTION: Message: NullReferenceException –> Object reference not set to an instance of an object.
2020.09.08 18:27:29.206 EXCEPTION: Stacktrace: at DirectOutput.Log.Exception(String Message, Exception E)
2020.09.08 18:27:29.206 EXCEPTION: Stacktrace: at DirectOutput.Cab.Cabinet.GetCabinetFromConfigXml(String ConfigXml)
2020.09.08 18:27:29.206 EXCEPTION: Stacktrace: at DirectOutput.Cab.Cabinet.GetCabinetFromConfigXmlFile(String FileName)
2020.09.08 18:27:29.206 EXCEPTION: Stacktrace: at DirectOutput.Cab.Cabinet.GetCabinetFromConfigXmlFile(FileInfo CabinetConfigFile)
2020.09.08 18:27:29.206 EXCEPTION: Stacktrace: at DirectOutput.Pinball.Setup(String GlobalConfigFilename, String TableFilename, String RomName)
2020.09.08 18:27:29.206 EXCEPTION: Targetsite: Void Exception(System.String, System.Exception)
2020.09.08 18:27:29.206 No cabinet config file loaded. Will use AutoConfig.
2020.09.08 18:27:29.206 Cabinet auto configuration started
2020.09.08 18:27:29.224 Detected and added PacLed64 Id 1 with name PacLed64 1
2020.09.08 18:27:29.224 Added LedwizEquivalent Nr. 20 with name PacLed64 1 Equivalent 1 for PacLed64 with Id 1
2020.09.08 18:27:29.225 PacDriveSingleton.PacUIOGetIdList: i=0, numdevices=1, DeviceType=PacLED64
2020.09.08 18:27:29.226 PhilipsHueAutoConfigurator.AutoConfig started…note, actual connection detection will happen asynchronously, and device disabled if not succesfull (check further down in the log)
2020.09.08 18:27:29.230 LedWiz-like device at VID=26881, PID=4644, product string=<not available>, manufacturer string=<not available>
2020.09.08 18:27:29.232 LedWiz-like device at VID=121, PID=6, product string=Generic USB Joystick , manufacturer string=DragonRise Inc.
2020.09.08 18:27:29.233 LedWiz-like device at VID=26881, PID=4644, product string=<not available>, manufacturer string=<not available>
2020.09.08 18:27:29.234 LedWiz-like device at VID=53769, PID=5121, product string=Ultimarc, manufacturer string=Ultimarc
2020.09.08 18:27:29.238 Cabinet auto configuration finished
2020.09.08 18:27:29.238 Cabinet loaded
2020.09.08 18:27:29.238 Loading table config
2020.09.08 18:27:29.238 No TableFilename specified, will use empty tableconfig
2020.09.08 18:27:29.238 Will try to load configs from DirectOutput.ini or LedControl.ini file(s) for RomName doflinx
2020.09.08 18:27:29.240 Loading LedControl file C:\DirectOutput\Config\directoutputconfig20.ini
2020.09.08 18:27:29.245 Min DOF Version is 0.8 for file directoutputconfig20.ini

You need to login in order to like this post: click here
September 8, 2020 at 6:28 pm in reply to: Teensy dof not responding #200321
chicagobears1977
Participant
@chicagobears1977
ok changed but the log file only appeares when doflinx.exe is run

You need to login in order to like this post: click here
September 8, 2020 at 6:12 pm in reply to: Teensy dof not responding #200318
chicagobears1977
Participant
@chicagobears1977
I followed major frenchys video. it shows him only using one port

You need to login in order to like this post: click here
September 8, 2020 at 6:08 pm in reply to: Teensy dof not responding #200317
chicagobears1977
Participant
@chicagobears1977
for some reason the output log is not updating

You need to login in order to like this post: click here
September 8, 2020 at 5:52 pm in reply to: Teensy dof not responding #200313
chicagobears1977
Participant
@chicagobears1977
still nothing. all the other toys work fine

You need to login in order to like this post: click here
September 8, 2020 at 5:38 pm in reply to: Teensy dof not responding #200309
chicagobears1977
Participant
@chicagobears1977
Direct Output

DirectOutput Version 3.1.7527.20768, built 2020.08.10 11:32
MJR Grander Unified DOF R3++ edition feat. Djrobx, Rambo3, and Freezy
DOF created by SwissLizard | https://github.com/mjrgh/DirectOutput
2020.09.08 17:33:10.440 DirectOutput Logger initialized
2020.09.08 17:33:10.423 Finishing framework
2020.09.08 17:33:10.424 Finishing cabinet
2020.09.08 17:33:10.425 Debug: Finishing output controllers
2020.09.08 17:33:10.425 Debug: Output controllers finished
2020.09.08 17:33:10.425 Cabinet finished
2020.09.08 17:33:10.425 DirectOutput framework finished.
2020.09.08 17:33:10.425 Bye and thanks for using!
2020.09.08 17:33:10.427 Global config filename is “C:\DirectOutput\config\GlobalConfig_b2SServer.xml”
2020.09.08 17:33:10.440 Global config loaded from: C:\DirectOutput\config\GlobalConfig_b2SServer.xml
2020.09.08 17:33:10.441 Loading Pinball parts
2020.09.08 17:33:10.441 Loading cabinet
2020.09.08 17:33:10.441 Will load cabinet config file: C:\DirectOutput\Config\cabinet.xml
2020.09.08 17:33:10.792 EXCEPTION: Could not load cabinet config from XML data.
2020.09.08 17:33:10.792 EXCEPTION: Thread:
2020.09.08 17:33:10.792 EXCEPTION: Message: Exception –> Could not deserialize the cabinet config from XML data.
2020.09.08 17:33:10.792 EXCEPTION: A exception occured when loading cabinet config file: C:\DirectOutput\Config\cabinet.xml
2020.09.08 17:33:10.792 EXCEPTION: Thread:
2020.09.08 17:33:10.792 EXCEPTION: Message: NullReferenceException –> Object reference not set to an instance of an object.
2020.09.08 17:33:10.793 EXCEPTION: Stacktrace: at DirectOutput.Log.Exception(String Message, Exception E)
2020.09.08 17:33:10.793 EXCEPTION: Stacktrace: at DirectOutput.Cab.Cabinet.GetCabinetFromConfigXml(String ConfigXml)
2020.09.08 17:33:10.793 EXCEPTION: Stacktrace: at DirectOutput.Cab.Cabinet.GetCabinetFromConfigXmlFile(String FileName)
2020.09.08 17:33:10.793 EXCEPTION: Stacktrace: at DirectOutput.Cab.Cabinet.GetCabinetFromConfigXmlFile(FileInfo CabinetConfigFile)
2020.09.08 17:33:10.793 EXCEPTION: Stacktrace: at DirectOutput.Pinball.Setup(String GlobalConfigFilename, String TableFilename, String RomName)
2020.09.08 17:33:10.793 EXCEPTION: Targetsite: Void Exception(System.String, System.Exception)
2020.09.08 17:33:10.794 No cabinet config file loaded. Will use AutoConfig.
2020.09.08 17:33:10.794 Cabinet auto configuration started
2020.09.08 17:33:10.810 Detected and added PacLed64 Id 1 with name PacLed64 1
2020.09.08 17:33:10.811 Added LedwizEquivalent Nr. 20 with name PacLed64 1 Equivalent 1 for PacLed64 with Id 1
2020.09.08 17:33:10.812 PacDriveSingleton.PacUIOGetIdList: i=0, numdevices=1, DeviceType=PacLED64
2020.09.08 17:33:10.812 PhilipsHueAutoConfigurator.AutoConfig started…note, actual connection detection will happen asynchronously, and device disabled if not succesfull (check further down in the log)
2020.09.08 17:33:10.816 LedWiz-like device at VID=26881, PID=4644, product string=<not available>, manufacturer string=<not available>
2020.09.08 17:33:10.819 LedWiz-like device at VID=121, PID=6, product string=Generic USB Joystick , manufacturer string=DragonRise Inc.
2020.09.08 17:33:10.819 LedWiz-like device at VID=26881, PID=4644, product string=<not available>, manufacturer string=<not available>
2020.09.08 17:33:10.820 LedWiz-like device at VID=53769, PID=5121, product string=Ultimarc, manufacturer string=Ultimarc
2020.09.08 17:33:10.824 Cabinet auto configuration finished
2020.09.08 17:33:10.824 Cabinet loaded
2020.09.08 17:33:10.824 Loading table config
2020.09.08 17:33:10.824 No TableFilename specified, will use empty tableconfig
2020.09.08 17:33:10.824 Will try to load configs from DirectOutput.ini or LedControl.ini file(s) for RomName doflinx
2020.09.08 17:33:10.826 Loading LedControl file C:\DirectOutput\Config\directoutputconfig.ini
2020.09.08 17:33:10.828 Min DOF Version is 0.8 for file directoutputconfig.ini
2020.09.08 17:33:10.828 Warning: Could not find table config section in file C:\DirectOutput\Config\directoutputconfig.ini.
2020.09.08 17:33:10.828 Loading LedControl file C:\DirectOutput\Config\directoutputconfig20.ini
2020.09.08 17:33:10.830 Min DOF Version is 0.8 for file directoutputconfig20.ini
2020.09.08 17:33:10.830 Resolving Tables Variables
2020.09.08 17:33:10.832 Resolving Global Variables
2020.09.08 17:33:11.321 Loading LedControl file C:\DirectOutput\Config\directoutputconfig30.ini
2020.09.08 17:33:11.345 Min DOF Version is 0.8 for file directoutputconfig30.ini
2020.09.08 17:33:11.345 Resolving Tables Variables
2020.09.08 17:33:11.345 Resolving Global Variables
2020.09.08 17:33:12.472 3 directoutputconfig.ini or ledcontrol.ini files loaded.
2020.09.08 17:33:12.474 Config for RomName doflinx exists in LedControl data. Updating cabinet and config.
2020.09.08 17:33:12.474 EXCEPTION: DirectOutput framework has encountered a exception during setup.
2020.09.08 17:33:12.474 EXCEPTION: Thread:
2020.09.08 17:33:12.474 EXCEPTION: Message: NullReferenceException –> Object reference not set to an instance of an object.
2020.09.08 17:33:12.474 EXCEPTION: Stacktrace: at DirectOutput.LedControl.Setup.Configurator.Setup(LedControlConfigList LedControlConfigList, Table Table, Cabinet Cabinet, String RomName)
2020.09.08 17:33:12.474 EXCEPTION: Stacktrace: at DirectOutput.Pinball.Setup(String GlobalConfigFilename, String TableFilename, String RomName)
2020.09.08 17:33:12.474 EXCEPTION: Targetsite: Void Setup(DirectOutput.LedControl.Loader.LedControlConfigList, DirectOutput.Table.Table, DirectOutput.Cab.Cabinet, System.String)
2020.09.08 17:33:12.486 Initializing cabinet
2020.09.08 17:33:12.487 Debug: Initializing output controllers
2020.09.08 17:33:12.487 Debug: Output controllers initialized
2020.09.08 17:33:12.487 Cabinet initialized
2020.09.08 17:33:12.490 PacLed64 Id:1 initialized and updater thread started.
2020.09.08 17:33:12.492 PacDriveSingleton.PacUIOGetIdList: i=0, numdevices=1, DeviceType=PacLED64
2020.09.08 17:33:14.480 Finishing framework
2020.09.08 17:33:14.480 Finishing cabinet
2020.09.08 17:33:14.481 Debug: Finishing output controllers
2020.09.08 17:33:15.732 PacLed64 Id:1 finished and updater thread stopped.
2020.09.08 17:33:15.732 Debug: Output controllers finished
2020.09.08 17:33:15.732 Cabinet finished
2020.09.08 17:33:15.732 DirectOutput framework finished.
2020.09.08 17:33:15.732 Bye and thanks for using!
2020.09.08 17:33:15.732 Initializing cabinet
2020.09.08 17:33:15.732 Debug: Initializing output controllers
2020.09.08 17:33:15.732 Debug: Output controllers initialized
2020.09.08 17:33:15.732 Cabinet initialized
2020.09.08 17:33:15.734 PacLed64 Id:1 initialized and updater thread started.
2020.09.08 17:33:15.734 PacDriveSingleton.PacUIOGetIdList: i=0, numdevices=1, DeviceType=PacLED64

globalconfig

<?xml version=”1.0″ encoding=”utf-8″?>
<!–Global configuration for the DirectOutput framework.–>
<!–Saved by DirectOutput Version 3.1.7527.20768: 2020-09-08 17-23-30–>
<GlobalConfig>
<LedWizDefaultMinCommandIntervalMs>10</LedWizDefaultMinCommandIntervalMs>
<LedControlMinimumEffectDurationMs>60</LedControlMinimumEffectDurationMs>
<LedControlMinimumRGBEffectDurationMs>120</LedControlMinimumRGBEffectDurationMs>
<PacLedDefaultMinCommandIntervalMs>10</PacLedDefaultMinCommandIntervalMs>
<IniFilesPath>C:\DirectOutput\Config</IniFilesPath>
<CabinetConfigFilePattern>C:\DirectOutput\Config\cabinet.xml</CabinetConfigFilePattern>
<TableConfigFilePatterns />
<EnableLogging>true</EnableLogging>
<ClearLogOnSessionStart>true</ClearLogOnSessionStart>
<LogFilePattern>.\DirectOutput.log</LogFilePattern>
</GlobalConfig>

globalconfig b2S<?xml version=”1.0″ encoding=”utf-8″?>
<!–Global configuration for the DirectOutput framework.–>
<!–Saved by DirectOutput Version 3.1.7527.20768: 2020-09-06 10-55-53–>
<GlobalConfig>
<LedWizDefaultMinCommandIntervalMs>10</LedWizDefaultMinCommandIntervalMs>
<LedControlMinimumEffectDurationMs>60</LedControlMinimumEffectDurationMs>
<LedControlMinimumRGBEffectDurationMs>120</LedControlMinimumRGBEffectDurationMs>
<PacLedDefaultMinCommandIntervalMs>10</PacLedDefaultMinCommandIntervalMs>
<IniFilesPath>C:\DirectOutput\Config</IniFilesPath>
<CabinetConfigFilePattern>C:\DirectOutput\Config\Cabinet.xml</CabinetConfigFilePattern>
<TableConfigFilePatterns />
<EnableLogging>true</EnableLogging>
<ClearLogOnSessionStart>true</ClearLogOnSessionStart>
<LogFilePattern>.\DirectOutput.log</LogFilePattern>
</GlobalConfig>

You need to login in order to like this post: click here
September 7, 2020 at 8:41 pm in reply to: Teensy dof not responding #200177
chicagobears1977
Participant
@chicagobears1977
hey outhere

I tried that xml file and nothing happened. I even changed out the teensy board thinking that might be it but still nothing. Im stumped.

You need to login in order to like this post: click here
September 6, 2020 at 7:21 pm in reply to: Teensy dof not responding #199950
chicagobears1977
Participant
@chicagobears1977
<?xml version=”1.0″?>
<Cabinet xmlns:xsi=”http://www.w3.org/2001/XMLSchema-instance” xmlns:xsd=”http://www.w3.org/2001/XMLSchema”>
<Name>MajorFrenchy</Name>
<OutputControllers>

<TeensyStripController>
<Name>LedStripController</Name>
<NumberOfLedsStrip1>736</NumberOfLedsStrip1>
<NumberOfLedsStrip2>0</NumberOfLedsStrip2>
<NumberOfLedsStrip3>0</NumberOfLedsStrip3>
<NumberOfLedsStrip4>0</NumberOfLedsStrip4>
<NumberOfLedsStrip5>0</NumberOfLedsStrip5>
<NumberOfLedsStrip6>0</NumberOfLedsStrip6>
<NumberOfLedsStrip7>0</NumberOfLedsStrip7>
<NumberOfLedsStrip8>0</NumberOfLedsStrip8>
<ComPortName>COM3</ComPortName>
</TeensyStripController>

</OutputControllers>

<Toys>

<LedStrip>
<Name>BackBoard</Name>
<Width>56</Width>
<Height>8</Height>
<LedStripArrangement>TopDownAlternateLeftRight</LedStripArrangement>
<ColorOrder>GRB</ColorOrder>
<FirstLedNumber>1</FirstLedNumber>
<FadingCurveName>SwissLizardsLedCurve</FadingCurveName>
<OutputControllerName>WS2811</OutputControllerName>
</LedStrip>

<LedStrip>
<Name>Sideboard Right</Name>
<Width>1</Width>
<Height>144</Height>
<LedStripArrangement>TopDownRightLeft</LedStripArrangement>
<ColorOrder>GRB</ColorOrder>
<FirstLedNumber>449</FirstLedNumber>
<FadingCurveName>SwissLizardsLedCurve</FadingCurveName>
<OutputControllerName>LedStripController</OutputControllerName>
</LedStrip>

<LedStrip>
<Name>Sideboard Left</Name>
<Width>1</Width>
<Height>144</Height>
<LedStripArrangement>DownUpRightLeft</LedStripArrangement>
<ColorOrder>GRB</ColorOrder>
<FirstLedNumber>593</FirstLedNumber>
<FadingCurveName>SwissLizardsLedCurve</FadingCurveName>
<OutputControllerName>LedStripController</OutputControllerName>
</LedStrip>

<LedStrip>
<Name>car</Name>
<Width>1</Width>
<Height>7</Height>
<LedStripArrangement>TopDownLeftRight</LedStripArrangement>
<ColorOrder>GRB</ColorOrder>
<FirstLedNumber>593</FirstLedNumber>
<FadingCurveName>SwissLizardsLedCurve</FadingCurveName>
<OutputControllerName>LedStripController</OutputControllerName>
</LedStrip>

<LedWizEquivalent>

<Name>LedWizEquivalent 30</Name>
<Outputs>

<LedWizEquivalentOutput>
<OutputName>BackBoard</OutputName>
<LedWizEquivalentOutputNumber>1</LedWizEquivalentOutputNumber>
</LedWizEquivalentOutput>

<LedWizEquivalentOutput>
<OutputName>Sideboard Right</OutputName>
<LedWizEquivalentOutputNumber>4</LedWizEquivalentOutputNumber>
</LedWizEquivalentOutput>

<LedWizEquivalentOutput>
<OutputName>Sideboard Left</OutputName>
<LedWizEquivalentOutputNumber>7</LedWizEquivalentOutputNumber>
</LedWizEquivalentOutput>

<LedWizEquivalentOutput>
<OutputName>car</OutputName>
<LedWizEquivalentOutputNumber>16</LedWizEquivalentOutputNumber>
</LedWizEquivalentOutput>

</Outputs>
<LedWizNumber>30</LedWizNumber>
</LedWizEquivalent>

</Toys>

</Cabinet>

You need to login in order to like this post: click here
September 6, 2020 at 7:10 pm in reply to: Teensy dof not responding #199946
chicagobears1977
Participant
@chicagobears1977
DirectOutput Version 3.1.7527.20768, built 2020.08.10 11:32
MJR Grander Unified DOF R3++ edition feat. Djrobx, Rambo3, and Freezy
DOF created by SwissLizard | https://github.com/mjrgh/DirectOutput
2020.09.06 15:24:20.964 DirectOutput Logger initialized
2020.09.06 15:24:20.964 Global config filename is “C:\DirectOutput\Config\GlobalConfig.xml”
2020.09.06 15:24:20.964 Global config loaded from: C:\DirectOutput\Config\GlobalConfig.xml
2020.09.06 15:24:20.964 Loading Pinball parts
2020.09.06 15:24:20.964 Loading cabinet
2020.09.06 15:24:20.964 Will load cabinet config file: C:\DirectOutput\Config\Cabinet.xml
2020.09.06 15:24:21.293 EXCEPTION: Could not load cabinet config from XML data.
2020.09.06 15:24:21.293 EXCEPTION: Thread:
2020.09.06 15:24:21.293 EXCEPTION: Message: Exception –> Could not deserialize the cabinet config from XML data.
2020.09.06 15:24:21.293 EXCEPTION: A exception occured when loading cabinet config file: C:\DirectOutput\Config\Cabinet.xml
2020.09.06 15:24:21.293 EXCEPTION: Thread:
2020.09.06 15:24:21.293 EXCEPTION: Message: NullReferenceException –> Object reference not set to an instance of an object.
2020.09.06 15:24:21.293 EXCEPTION: Stacktrace: at DirectOutput.Log.Exception(String Message, Exception E)
2020.09.06 15:24:21.293 EXCEPTION: Stacktrace: at DirectOutput.Cab.Cabinet.GetCabinetFromConfigXml(String ConfigXml)
2020.09.06 15:24:21.293 EXCEPTION: Stacktrace: at DirectOutput.Cab.Cabinet.GetCabinetFromConfigXmlFile(String FileName)
2020.09.06 15:24:21.293 EXCEPTION: Stacktrace: at DirectOutput.Cab.Cabinet.GetCabinetFromConfigXmlFile(FileInfo CabinetConfigFile)
2020.09.06 15:24:21.293 EXCEPTION: Stacktrace: at DirectOutput.Pinball.Setup(String GlobalConfigFilename, String TableFilename, String RomName)
2020.09.06 15:24:21.293 EXCEPTION: Targetsite: Void Exception(System.String, System.Exception)
2020.09.06 15:24:21.293 No cabinet config file loaded. Will use AutoConfig.
2020.09.06 15:24:21.293 Cabinet auto configuration started
2020.09.06 15:24:21.388 Detected and added PacLed64 Id 1 with name PacLed64 1
2020.09.06 15:24:21.388 Added LedwizEquivalent Nr. 20 with name PacLed64 1 Equivalent 1 for PacLed64 with Id 1
2020.09.06 15:24:21.388 PacDriveSingleton.PacUIOGetIdList: i=0, numdevices=1, DeviceType=PacLED64
2020.09.06 15:24:21.404 PhilipsHueAutoConfigurator.AutoConfig started…note, actual connection detection will happen asynchronously, and device disabled if not succesfull (check further down in the log)
2020.09.06 15:24:21.404 LedWiz-like device at VID=26881, PID=4644, product string=<not available>, manufacturer string=<not available>
2020.09.06 15:24:21.404 LedWiz-like device at VID=121, PID=6, product string=Generic USB Joystick , manufacturer string=DragonRise Inc.
2020.09.06 15:24:21.404 LedWiz-like device at VID=26881, PID=4644, product string=<not available>, manufacturer string=<not available>
2020.09.06 15:24:21.404 LedWiz-like device at VID=53769, PID=5121, product string=Ultimarc, manufacturer string=Ultimarc
2020.09.06 15:24:21.419 Cabinet auto configuration finished
2020.09.06 15:24:21.419 Cabinet loaded
2020.09.06 15:24:21.419 Loading table config
2020.09.06 15:24:21.419 Warning: No table config file found. Will try to load config from LedControl file(s).
2020.09.06 15:24:21.419 Will try to load configs from DirectOutput.ini or LedControl.ini file(s) for RomName austin
2020.09.06 15:24:21.419 Loading LedControl file C:\Visual Pinball\Tables\directoutputconfig20.ini
2020.09.06 15:24:21.435 Min DOF Version is 0.8 for file directoutputconfig20.ini
2020.09.06 15:24:21.435 Resolving Tables Variables
2020.09.06 15:24:21.435 Resolving Global Variables
2020.09.06 15:24:21.919 Loading LedControl file C:\Visual Pinball\Tables\directoutputconfig30.ini
2020.09.06 15:24:21.951 Min DOF Version is 0.8 for file directoutputconfig30.ini
2020.09.06 15:24:21.951 Resolving Tables Variables
2020.09.06 15:24:21.951 Resolving Global Variables
2020.09.06 15:24:23.060 2 directoutputconfig.ini or ledcontrol.ini files loaded.
2020.09.06 15:24:23.060 Config for RomName austin exists in LedControl data. Updating cabinet and config.
2020.09.06 15:24:23.075 Table config loading finished: romname=austin, tablename=Austin Powers (Stern 2001) 1.01
2020.09.06 15:24:23.075 Pinball parts loaded
2020.09.06 15:24:23.075 Starting processes
2020.09.06 15:24:23.075 Initializing cabinet
2020.09.06 15:24:23.075 Debug: Initializing output controllers
2020.09.06 15:24:23.075 PacLed64 Id:1 initialized and updater thread started.
2020.09.06 15:24:23.075 Debug: Output controllers initialized
2020.09.06 15:24:23.091 Cabinet initialized
2020.09.06 15:24:23.091 Loading shape definition file: C:\DirectOutput\Config\DirectOutputShapes.xml
2020.09.06 15:24:23.138 Framework initialized.
2020.09.06 15:24:23.138 Have fun! :)
2020.09.06 15:24:37.327 Finishing framework
2020.09.06 15:24:37.327 Finishing cabinet
2020.09.06 15:24:37.327 Debug: Finishing output controllers
2020.09.06 15:24:38.565 PacLed64 Id:1 finished and updater thread stopped.
2020.09.06 15:24:38.565 Debug: Output controllers finished
2020.09.06 15:24:38.565 Cabinet finished
2020.09.06 15:24:38.565 DirectOutput framework finished.
2020.09.06 15:24:38.565 Bye and thanks for using!

You need to login in order to like this post: click here
September 6, 2020 at 6:44 pm in reply to: Teensy dof not responding #199944
chicagobears1977
Participant
@chicagobears1977
You need to login in order to like this post: click here
December 4, 2018 at 1:15 pm in reply to: PinUp start up issue #105713
chicagobears1977
Participant
@chicagobears1977
Thanks NailBuster. I fixed the timeout and that did it. It works now. I upped the seconds and it loads perfectly now, no error. Thanks again

You need to login in order to like this post: click here
Author

Posts