OlaP

[OlaP]

But that was just 5 minutes, and I got to keep the Instruction Card at the Apron screen :)
Perfecter solution and I really recommend it!

Attachments:

1. 

   CCC2.jpg
   

You need to login in order to like this post: click here

[OlaP]

Thank you Phil!

I followed your example just recently. It didn’t work directly, but pointed me to a solution.
I have dmdext v1.8.0 and Win10.

To get the fake.bat to work I had to rewrite it a bit:
@dmdext mirror -s screen –position 5200 0 512 128 -d pin2dmd –no-virtual

I placed the P-ROC dmd on a small apron screen to get it out of view from the backbox. (circled with red in the picture)
This works, but the image shown on the PIN2DMD is a bit too dark. To get some more color and light to the PIN2DMD I changed the Machine (standard) in  user_settings.yaml to “Color Display Dot Style: SQUARE”

Cheers,
Ola

Attachments:

1. 

   CCC.jpg
   

You need to login in order to like this post: click here

[OlaP]

Good work Senseless!

I would prefer to have a Gun plunger on every IJ table though. I have 3D modeled an OK Gun, would it be possible for you to use that in the IJ VR room? Let me know if you would like to use it, and which file format you prefer.

Cheers,

Ola

 

 

You need to login in order to like this post: click here

[OlaP]

Hi all!
A first try att editing FX3 SSF for WMS Medieval Madness. Unfortunately there are no triggers for ramps, only for the gates leading to the ramps, so no sounds of balls rolling on neither plastic nor wire ramps.
Cheers,
Ola

Attachments:

1. WMS_Medieval_Madness.zip

You need to login in order to like this post: click here

1 user thanked author for this post.

0Cool

[Author]

Posts