Seve

[Seve]

remdwaas1986 wrote:

Seve wrote:

remdwaas1986 wrote:

Seve wrote:

chaffee1921 wrote:

remdwaas1986 wrote:

chaffee1921 wrote:

Any help on installing Flex DMD? I downloaded release 1.50, unpacked everything into the VPinMame folder and unblocked all the files. When I try to run the UI application though, nothing happens. Just blank.

first install ultradmd then place the following files in C:\Visual Pinball\VPinMAME

FlexDMD.dll

FlexDMD.log.config

FlexUDMD.dll

FlexDMDUI.exe

open the FlexDMDUI.exe and in install click twice on register and flex dmd is installed.

I went through all the steps you mentioned but when I click on the .exe to register, nothing comes up. I have created exclusions for my VPinMame folder, my Visual Pinball folder, and the FlexDMDUI.exe file. Not sure what else to do. All .dlls are unblocked too.

I have the same issue. I’ve tried all the steps but the problem continues. Do you resolve it?

i use this installers:

https://drive.google.com/drive/folders/1xq-JTu5aUP1tLkyFRDs3ZOzjFep6SlPf?usp=sharing

I don’t have any problems and using a real dmd as well.

Regards,

Remko

Thank you. I’ve tried with this installers but still have the issue. Bad luck

Hi, i had the same problem with my real dmd, that nothing would be displayed. i reinstalled vpx and did the steps again with the installers and after a reboot it worked. If you installed flex on desktop mode the table will start and you will see no dmd, you have to alt tab to get the dmd, that why i use flex only on my cab. I use windows 10.

Thanks again. Reinstalled vpx and did the steps again, then reboot but FlexDMDui.exe still do nothing. Windows 10 and cab mode. Very strange.

 

You need to login in order to like this post: click here

[Seve]

remdwaas1986 wrote:

Seve wrote:

chaffee1921 wrote:

remdwaas1986 wrote:

chaffee1921 wrote:

Any help on installing Flex DMD? I downloaded release 1.50, unpacked everything into the VPinMame folder and unblocked all the files. When I try to run the UI application though, nothing happens. Just blank.

first install ultradmd then place the following files in C:\Visual Pinball\VPinMAME

FlexDMD.dll

FlexDMD.log.config

FlexUDMD.dll

FlexDMDUI.exe

open the FlexDMDUI.exe and in install click twice on register and flex dmd is installed.

I went through all the steps you mentioned but when I click on the .exe to register, nothing comes up. I have created exclusions for my VPinMame folder, my Visual Pinball folder, and the FlexDMDUI.exe file. Not sure what else to do. All .dlls are unblocked too.

I have the same issue. I’ve tried all the steps but the problem continues. Do you resolve it?

i use this installers:

https://drive.google.com/drive/folders/1xq-JTu5aUP1tLkyFRDs3ZOzjFep6SlPf?usp=sharing

I don’t have any problems and using a real dmd as well.

Regards,

Remko

Thank you. I’ve tried with this installers but still have the issue. Bad luck

 

You need to login in order to like this post: click here

[Seve]

chaffee1921 wrote:

remdwaas1986 wrote:

chaffee1921 wrote:

Any help on installing Flex DMD? I downloaded release 1.50, unpacked everything into the VPinMame folder and unblocked all the files. When I try to run the UI application though, nothing happens. Just blank.

first install ultradmd then place the following files in C:\Visual Pinball\VPinMAME

FlexDMD.dll

FlexDMD.log.config

FlexUDMD.dll

FlexDMDUI.exe

open the FlexDMDUI.exe and in install click twice on register and flex dmd is installed.

I went through all the steps you mentioned but when I click on the .exe to register, nothing comes up. I have created exclusions for my VPinMame folder, my Visual Pinball folder, and the FlexDMDUI.exe file. Not sure what else to do. All .dlls are unblocked too.

I have the same issue. I’ve tried all the steps but the problem continues. Do you resolve it?

 

You need to login in order to like this post: click here

[Seve]

I had the table too but with no Pup Pack. It’s a pity. This table whith Pup Pack must be amazing.

 

You need to login in order to like this post: click here

[Seve]

Great Inder table! Thanks!

You need to login in order to like this post: click here

1 user thanked author for this post.

Goldchicco

[Seve]

Hola. He instalado todo siguiendo las instrucciones, con la configuración para dos pantallas eligiendo un overlay pero, durante la partida, solo aparece el video del mapa de la tierra media. No aparecen más videos.

¿Alguien sabe qué puede pasar?

Muchas gracias por anticipado.

 

You need to login in order to like this post: click here

[Author]

Posts