- This topic has 42 replies, 26 voices, and was last updated 3 years, 7 months ago by JediWizard.
-
AuthorPosts
-
July 16, 2020 at 6:29 pm #191432
- Can’t wait to give this a go.! I have 2 wips of this table. Glad to see this finished up. Thanks diemonik and freneticamnesic
You need to login in order to like this post: click here
July 16, 2020 at 7:34 pm #191435Thanks for the table.
You should change the assigned category though (VPX table videos), since someone looking for VPX tables will not see it listed.You need to login in order to like this post: click here
July 16, 2020 at 8:45 pm #191448A very welcome update. Thank you sir.
Onevox
You need to login in order to like this post: click here
July 16, 2020 at 9:29 pm #191451anyone else having really weird physics on this table? The ball seems to do weird things sometimes
You need to login in order to like this post: click here
July 16, 2020 at 10:12 pm #191454thanks for the help on script
You need to login in order to like this post: click here
July 16, 2020 at 11:19 pm #191459anyone else having really weird physics on this table?
I’m just getting a lot of slowdown during multiball: more so than on other tables.
You need to login in order to like this post: click here
July 18, 2020 at 10:06 am #191667I get an error in line 49 (End Sub) and the table does not load.
EDIT: I deleted the .VPX and replaced with the download and it works again. I believe an edit (replaced ball) must have messed something up.You need to login in order to like this post: click here
July 30, 2020 at 11:52 am #193213I sure like your table. Thanks so much.
Two things happening when I play.
- Â There is very little randomness with the plunger shot. I get the skill shot 100 percent of the time.
- Â The upper right scoop works sometimes and at other times the ball just rolls right over it (in both directions).
Maybe I’m the only installation with these two idiosyncrasies.
Thanks again for your work.
You need to login in order to like this post: click here
July 30, 2020 at 12:36 pm #193218OK, I did something wrong with the script update, the table get the old error and can’t start.
Has someone a working script for me, please?
You need to login in order to like this post: click here
August 1, 2020 at 1:39 pm #193634thx a million will install on my cab tonight
You need to login in order to like this post: click here
August 2, 2020 at 12:54 am #193711I sure like your table. Thanks so much.
Two things happening when I play.
- There is very little randomness with the plunger shot. I get the skill shot 100 percent of the time.
- The upper right scoop works sometimes and at other times the ball just rolls right over it (in both directions).
Maybe I’m the only installation with these two idiosyncrasies.
Thanks again for your work.
No. It is not only you that sees these things happening. Randomness I can add with script change alone, but, the scoop thing would probably require a table update.
You need to login in order to like this post: click here
August 2, 2020 at 10:25 am #193765@thalamus, if you have time, would it be possible for you to post how to fix the plunger randomness in the scripts. I have a few tables that could use a plunger randomness fix but I did not know how to fix it.
You need to login in order to like this post: click here
August 2, 2020 at 11:54 am #193769It is easier to do via the mechanical plunger properties to be honest. Scatter Velocity, from this wiki explains how to accomplish this. https://vpinball.com/wiki/visual-pinball-knowledge-base/plunger-adjustments/ – if the table has mechanical plunger, then it feels wrong to adjust any randomness to the plunger – agreed ? So, instead you look at the properties of where it hits. Might be a gate, rubber or something. Very often I’ve tuned those, seen way too many tables where you plunge and it is a repeating pattern.
Are you still wanting a scripted solution ? I can certainly look it up, just don’t have any code example ready for you.
You need to login in order to like this post: click here
August 3, 2020 at 4:45 pm #193882Thank You for the link and info @Thalamus. I will check it out and do some experimenting with what I find on some tables. A scripted solution would still be great, but only if you have the time. Thanks
You need to login in order to like this post: click here
August 6, 2020 at 9:15 pm #194318August 7, 2020 at 4:52 pm #194424@diemonik, would it be possible to get the change log posted on what was changed in the 1.2 update?
You need to login in order to like this post: click here
August 7, 2020 at 11:34 pm #194529Thank You @diemonik for the updated change log.
You need to login in order to like this post: click here
September 7, 2020 at 3:34 am #200002Thanks Man
You need to login in order to like this post: click here
September 7, 2020 at 5:33 am #200019Thanks for the update !
You need to login in order to like this post: click here
September 7, 2020 at 5:43 am #200020Thank you for the update.
You need to login in order to like this post: click here
-
AuthorPosts
Forums are currently locked.